Excellent buffer layer for growing high-quality Y-Ba-Cu-O thin films

Eu2CuO4 (ECO) has been used as a buffer layer for growing of YBa2Cu3O7-ä (YBCO) thin films on SrTiO3(100) and Y-stabilized ZrO2(100) substrates. The epitaxy, crystallinity, and surface of YBCO thin films have been significantly improved by using ECO buffer layer as investigated by x-ray diffraction, rocking curves, scanning electron microscope, surface step profiler, and x-ray small-angle reflection. The best value of the full width at half-maximum of the YBCO(005) peak can be greatly reduced down to less than 0.1°. The scanning-electron-microscope photos indicate a very smooth surface for the YBCO thin films. The average roughness is less than 5 nm over a wide scanning region of 2000 ìm. The results of x-ray small-angle reflection indicate a very clear and flat interface between YBCO and ECO layers. Meanwhile, the resistivity of ECO is about 20 times higher than that of PrBa2Cu3Oy at the boiling point of liquid nitrogen. Our results suggest that ECO should be a good barrier candidate for fabricating high-Tc superconductor junctions.published_or_final_versio

FUT8 (fucosyltransferase 8 (alpha (1,6) fucosyltransferase))

Review on FUT8 (fucosyltransferase 8 (alpha (1,6) fucosyltransferase)), with data on DNA, on the protein encoded, and where the gene is implicated

Physiological Responses of Synechocystis sp PCC 6803 under Clinorotation

Photosystem efficiency and the characteristic on oxidative stress were examined to elucidate the metabolic responses of Synechocystis sp. PCC 6803 to short-term clinorotation. Results compiled when using clinostat to simulate microgravity for 60 h, showed that clinorotation clearly prohibited the photochemical quantum yield, but promoted the synthesis of chlorophyll and total protein. This may be a compensatory mechanism for the algal cell to maintain its normal metabolism. An increased malondialdehyde (MDA) content of algal cell upon clinorotation, together with an enhanced catalase (CAT) activity was observed during the whole period of clinorotation. One conclusion is that short-term clinorotation acts as a kind of stress, and that these physiological responses may be a special way for an algal cell to adapt itself to a different environment other than earth gravity.Photosystem efficiency and the characteristic on oxidative stress were examined to elucidate the metabolic responses of Synechocystis sp. PCC 6803 to short-term clinorotation. Results compiled when using clinostat to simulate microgravity for 60 h, showed that clinorotation clearly prohibited the photochemical quantum yield, but promoted the synthesis of chlorophyll and total protein. This may be a compensatory mechanism for the algal cell to maintain its normal metabolism. An increased malondialdehyde (MDA) content of algal cell upon clinorotation, together with an enhanced catalase (CAT) activity was observed during the whole period of clinorotation. One conclusion is that short-term clinorotation acts as a kind of stress, and that these physiological responses may be a special way for an algal cell to adapt itself to a different environment other than earth gravity

A survey of parametric modelling methods for designing the head of a high-speed train

With the continuous increase of the running speed, the head shape of the high-speed train (HST) turns out to be a critical factor for further speed boost. In order to cut down the time used in the HST head design and improve the modelling efficiency, various parametric modelling methods have been widely applied in the optimization design of the HST head to obtain an optimal head shape so that the aerodynamic effect acting on the head of HSTs can be reduced and more energy can be saved. This paper reviews these parametric modelling methods and classifies them into four categories: 2D, 3D, CATIA-based, and mesh deformation-based parametric modelling methods. Each of the methods is introduced, and the advantages and disadvantages of these methods are identified. The simulation results are presented to demonstrate that the aerodynamic performance of the optimal models constructed by these parametric modelling methods has been improved when compared with numerical calculation results of the original models or the prototype models of running trains. Since different parametric modelling methods used different original models and optimization methods, few publications could be found which compare the simulation results of the aerodynamic performance among different parametric modelling methods. In spite of this, these parametric modelling methods indicate more local shape details will lead to more accurate simulation results, and fewer design variables will result in higher computational efficiency. Therefore, the ability of describing more local shape details with fewer design variables could serve as a main specification to assess the performance of various parametric modelling methods. The future research directions may concentrate on how to improve such ability

Topological Crystalline Insulators in the SnTe Material Class

Topological crystalline insulators are new states of matter in which the topological nature of electronic structures arises from crystal symmetries. Here we predict the first material realization of topological crystalline insulator in the semiconductor SnTe, by identifying its nonzero topological index. We predict that as a manifestation of this nontrivial topology, SnTe has metallic surface states with an even number of Dirac cones on high-symmetry crystal surfaces such as {001}, {110} and {111}. These surface states form a new type of high-mobility chiral electron gas, which is robust against disorder and topologically protected by reflection symmetry of the crystal with respect to {110} mirror plane. Breaking this mirror symmetry via elastic strain engineering or applying an in-plane magnetic field can open up a continuously tunable band gap on the surface, which may lead to wide-ranging applications in thermoelectrics, infrared detection, and tunable electronics. Closely related semiconductors PbTe and PbSe also become topological crystalline insulators after band inversion by pressure, strain and alloying.Comment: submitted on Feb. 10, 2012; to appear in Nature Communications; 5 pages, 4 figure

Absence of Detectable Influenza RNA Transmitted via Aerosol during Various Human Respiratory Activities – Experiments from Singapore and Hong Kong

Two independent studies by two separate research teams (from Hong Kong and Singapore) failed to detect any influenza RNA landing on, or inhaled by, a life-like, human manikin target, after exposure to naturally influenza-infected volunteers. For the Hong Kong experiments, 9 influenza-infected volunteers were recruited to breathe, talk/count and cough, from 0.1 m and 0.5 m distance, onto a mouth-breathing manikin. Aerosolised droplets exhaled from the volunteers and entering the manikin’s mouth were collected with PTFE filters and an aerosol sampler, in separate experiments. Virus detection was performed using an in-house influenza RNA reverse-transcription polymerase chain reaction (RT-PCR) assay. No influenza RNA was detected from any of the PTFE filters or air samples. For the Singapore experiments, 6 influenza-infected volunteers were asked to breathe (nasal/mouth breathing), talk (counting in English/second language), cough (from 1 m/0.1 m away) and laugh, onto a thermal, breathing manikin. The manikin’s face was swabbed at specific points (around both eyes, the nostrils and the mouth) before and after exposure to each of these respiratory activities, and was cleaned between each activity with medical grade alcohol swabs. Shadowgraph imaging was used to record the generation of these respiratory aerosols from the infected volunteers and their impact onto the target manikin. No influenza RNA was detected from any of these swabs with either team’s in-house diagnostic influenza assays. All the influenza-infected volunteers had diagnostic swabs taken at recruitment that confirmed influenza (A/H1, A/H3 or B) infection with high viral loads, ranging from 105-108 copies/mL (Hong Kong volunteers/assay) and 104–107 copies/mL influenza viral RNA (Singapore volunteers/assay). These findings suggest that influenza RNA may not be readily transmitted from naturally-infected human source to susceptible recipients via these natural respiratory activities, within these exposure time-frames. Various reasons are discussed in an attempt to explain these findings.published_or_final_versio

Associations between respiratory health outcomes and coal mine fire PM2.5 smoke exposure: a cross- sectional study

In 2014, wildfires ignited a fire in the Morwell open cut coal mine, Australia, which burned for six weeks. This study examined associations between self-reported respiratory outcomes in adults and mine fire-related PM2.5 smoke exposure. Self-reported data were collected as part of the Hazelwood Health Study Adult Survey. Eligible participants were adult residents of Morwell. Mine fire-related PM2.5 concentrations were provided by the Commonwealth Scientific and Industrial Research Organisation Oceans & Atmosphere Flagship. Personalised mean 24-h and peak 12-h mine fire-related PM2.5 exposures were estimated for each participant. Data were analysed by multivariate logistic regression. There was some evidence of an association between respiratory outcomes and mine fire PM2.5 exposure. Chronic cough was associated with an odds ratio (OR) of 1.13 (95% confidence interval 1.03 to 1.23) per 10 μg/m3 increment in mean PM2.5 and 1.07 (1.02 to 1.12) per 100 μg/m3 increment in peak PM2.5. Current wheeze was associated with peak PM2.5, OR = 1.06 (1.02 to 1.11) and chronic phlegm with mean PM2.5 OR = 1.10 (1.00 to 1.20). Coal mine PM2.5 smoke exposure was associated with increased odds of experiencing cough, phlegm and wheeze. Males, participants 18–64 years, and those residing in homes constructed from non-brick/concrete materials or homes with tin/metal roofs had higher estimated ORs. These findings contribute to the formation of public health policy responses

Disparities and risks of sexually transmissible infections among men who have sex with men in China: a meta-analysis and data synthesis.

BACKGROUND: Sexually transmitted infections (STIs), including Hepatitis B and C virus, are emerging public health risks in China, especially among men who have sex with men (MSM). This study aims to assess the magnitude and risks of STIs among Chinese MSM. METHODS: Chinese and English peer-reviewed articles were searched in five electronic databases from January 2000 to February 2013. Pooled prevalence estimates for each STI infection were calculated using meta-analysis. Infection risks of STIs in MSM, HIV-positive MSM and male sex workers (MSW) were obtained. This review followed the PRISMA guidelines and was registered in PROSPERO. RESULTS: Eighty-eight articles (11 in English and 77 in Chinese) investigating 35,203 MSM in 28 provinces were included in this review. The prevalence levels of STIs among MSM were 6.3% (95% CI: 3.5-11.0%) for chlamydia, 1.5% (0.7-2.9%) for genital wart, 1.9% (1.3-2.7%) for gonorrhoea, 8.9% (7.8-10.2%) for hepatitis B (HBV), 1.2% (1.0-1.6%) for hepatitis C (HCV), 66.3% (57.4-74.1%) for human papillomavirus (HPV), 10.6% (6.2-17.6%) for herpes simplex virus (HSV-2) and 4.3% (3.2-5.8%) for Ureaplasma urealyticum. HIV-positive MSM have consistently higher odds of all these infections than the broader MSM population. As a subgroup of MSM, MSW were 2.5 (1.4-4.7), 5.7 (2.7-12.3), and 2.2 (1.4-3.7) times more likely to be infected with chlamydia, gonorrhoea and HCV than the broader MSM population, respectively. CONCLUSION: Prevalence levels of STIs among MSW were significantly higher than the broader MSM population. Co-infection of HIV and STIs were prevalent among Chinese MSM. Integration of HIV and STIs healthcare and surveillance systems is essential in providing effective HIV/STIs preventive measures and treatments. TRIAL REGISTRATION: PROSPERO NO: CRD42013003721