Strong Field-Induced Frequency Conversion of Laser Radiation in Plasma Plumes: Recent Achievements

New findings in plasma harmonics studies using strong laser fields are reviewed. We discuss recent achievements in the growth of the efficiency of coherent extreme ultraviolet (XUV) radiation sources based on frequency conversion of the ultrashort pulses in the laser-produced plasmas, which allowed for the spectral and structural studies of matter through the high-order harmonic generation (HHG) spectroscopy. These studies showed that plasma HHG can open new opportunities in many unexpected areas of laser-matter interaction. Besides being considered as an alternative method for generation of coherent XUV radiation, it can be used as a powerful tool for various spectroscopic and analytical applications

Nonlinear optical sensors on metal nanoparticles synthesized by ion implantation

Recent results on ion synthesis and nonlinear optical properties of metal nanoparticles in various dielectrics are presented. Copper and silver nanoparticles were fabricated in silica and soda lime glasses by low energy ion implantation. The nonlinear optical characteristics of nanoparticle composite materials, which may be suited for optical sensing, were studied by applying Z-scan transmittance measurements. They were performed in the near IR area at a wavelength of 1,064 nm, using picosecond pulses of a Nd:YAG laser. Optical nonlinearities of the metal nanoparticles in various substrates such as a nonlinear refraction and a nonlinear susceptibility were detected. It was shown that the influence of the dielectric environment (optical constants) around these nanoparticles considerably changes the nonlinear optical response of the composite materials. Ultrafast optical sensors based on nonlinear effects in metal nanoparticles are discussed. © 2011 Springer Science+Business Media B.V

Plasma Dynamics Characterization for Improvement of Resonantly Enhanced Harmonics Generation in Indium and Tin Laser-Produced Plasmas

R.A.G. is grateful to H. Kuroda for providing the access to the laser facility. As a Center of Excellence, the Institute of Solid State Physics at the University of Latvia received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement no. 739508, project CAMART².In this study, we characterize the properties of indium and tin laser-induced plasmas responsible for efficient high-order harmonics generation of the ultrashort pulses propagating through these media. The optimally formed plasma was determined using the analysis of the time-resolved variations in the spectral and morphological features of spreading indium and tin plasma components under different regimes of laser ablation. We report the measurements of plasma velocities under different regimes of ablation and correlate them with the optimal delay between the heating and probe laser pulses for the generation of harmonics with the highest yield. Electron temperatures and densities are determined using the integrated and time-resolved spectral measurements of plasmas. The resonance-enhanced harmonics are compared with other harmonics from the point of view of the modulation of plasma characteristics. The harmonics of 800 and 1200–2200 nm lasers and their second-harmonic fields were analyzed at optimal conditions of Sn and In plasma formation. The novelty of this work is the implementation of the diagnostics of the dynamics of plasma characteristics for the determination of the optimal plasma formation for harmonics generation. Such an approach allows for the demonstration of the maximal harmonic yield from the studied plasma and the definition of the various resonance-induced harmonic generation conditions. © 2022 by the authors.European Regional Development Fund (1.1.1.5/19/A/003); Institute of Solid-State Physics, University of Latvia has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-Teaming Phase 2 under grant agreement No. 739508, project CAMART2

Application of Ion Implantation for Synthesis of Copper Nanoparticles in a Zinc Oxide Matrix for Obtaining New Nonlinear Optical Materials

We have obtained a layered composite material by implantation of single crystal zinc oxide (ZnO) substrates with 160-keV Cu+ ions to a dose of 10(16) or 10(17) cm(-2). The composite was studied by linear optical absorption spectroscopy; the nonlinear optical characteristics were determined by means of Z-scanning at a laser radiation wavelength of 532 nm. The appearance of the optical plasmon resonance bands in the spectra indicated that ion implantation to the higher dose provides for the formation of copper nanoparticles in a subsurface layer of ZnO. The new nonlinear optical material comprising metal nanoparticles in a ZnO matrix exhibits the phenomenon of self-defocusing and possesses a high nonlinear absorption coefficient (beta = 2.07 x 10(-3) cm/W). (C) 2004 MAIK "Nauka / Interperiodica"

Precision Measurements of d(d,p)t and d(d,n)^3He Total Cross Sections at Big-Bang Nucleosynthesis Energies

Recent Wilkinson Microwave Anisotropy Probe (WMAP) measurements have determined the baryon density of the Universe $\Omega_b$ with a precision of about 4%. With $\Omega_b$ tightly constrained, comparisons of Big Bang Nucleosynthesis (BBN) abundance predictions to primordial abundance observations can be made and used to test BBN models and/or to further constrain abundances of isotopes with weak observational limits. To push the limits and improve constraints on BBN models, uncertainties in key nuclear reaction rates must be minimized. To this end, we made new precise measurements of the d(d,p)t and d(d,n)^3He total cross sections at lab energies from 110 keV to 650 keV. A complete fit was performed in energy and angle to both angular distribution and normalization data for both reactions simultaneously. By including parameters for experimental variables in the fit, error correlations between detectors, reactions, and reaction energies were accurately tabulated by computational methods. With uncertainties around 2% +/- 1% scale error, these new measurements significantly improve on the existing data set. At relevant temperatures, using the data of the present work, both reaction rates are found to be about 7% higher than those in the widely used Nuclear Astrophysics Compilation of Reaction Rates (NACRE). These data will thus lead not only to reduced uncertainties, but also to modifications in the BBN abundance predictions.Comment: 15 pages, 11 figures, minor editorial change

Dependence of the microstructure and magnetic properties of amorphous TbFeCo films on the type and pressure of the gas in sputtering

Amorphous Tb30Fe60Co10 films have been fabricated by magnetron sputtering. The dependences of the microstructure and magnetic properties of these films on the type and pressure of the gas in the sputtering chamber have been studied. The pressure of the Ar, Kr, and Xe gases used in the experiments is varied in the sputtering chamber from 0.01 to 4.00 Pa. It has been established that sputtering in the heavy gas (Kr) conducted within the pressure range covered does not permit fabricating TbFeCo films with the easy magnetization axis perpendicular to the film plane. With Xe used at pressures below 1.0 Pa, one observes in TbFeCo films an increase of the coercivity, with the hysteresis loop approaching rectangular shape. Sputtering and deposition in Ar at a pressure of ~0.67 Pa result in the formation of amorphous Tb30Fe60Co10 films with magnetic characteristics satisfying the requirements imposed upon information carriers intended to be employed in perpendicular recording. It has been demonstrated that, by magnetron sputtering in an Ar atmosphere performed at pressures below 1 Pa, one can produce amorphous Tb30Fe60Co10 films suitable for magneto-optical ultra-high-density information recording. © 2012 Pleiades Publishing, Ltd

Variation of Nonlinear Refraction and Three-Photon Absorption of Indium–Tin Oxide Quantum Dot Thin Films and Solutions in Near Infrared Range

Authors acknowledge the support of J. Grube and A. Sarakovskis in providing the laser facility for these studies. Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART2.We characterize the nonlinear optical properties of indium–tin oxide (ITO) quantum dots (QDs) in the IR range using the Z-scan method. We present results of three-photon absorption (3PA), third harmonic generation (3HG), and Kerr-effect-induced nonlinear refraction in ITO QDs. Z-scan measurements were carried out for the QDs solution, while 3HG was demonstrated using QD thin films. The Kerr-induced nonlinear refractive index was analyzed along the 800–950 nm range showing an increase in this parameter from −6.7 × 10−18 to −1.5 × 10−17 m2 W−1. At longer wavelengths (1000–1100 nm), the higher-order effects started to contribute to a nonlinear refractive index. The 3PA coefficient at 950 nm was measured to be 1.42 × 10−25 m3/W2. We discuss the peculiarities in the wavelength-dependent variation of the coefficient of nonlinear absorption responsible for 3PA in the range of 800–1150 nm. Third harmonic generation was analyzed in the 1200–1550 nm spectral range. The absolute value of 3HG conversion efficiency in the 150 nm thick film at the wavelength of laser radiation (1350 nm) was estimated to be ~10–5. --//-- This is an open access article Bundulis, A.; Berzina, A.; Kim, V.V.; Polyakov, B.; Novikovs, A.; Ganeev, R.A. Variation of Nonlinear Refraction and Three-Photon Absorption of Indium–Tin Oxide Quantum Dot Thin Films and Solutions in Near Infrared Range. Nanomaterials 2023, 13, 2320. https://doi.org/10.3390/nano13162320 published under the CC BY 4.0 licence.Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART2

Magnetic anisotropy of multilayer [Fe/Pt]n structures

The possibility of controlling the magnetic anisotropy of multilayer [Fe/Pt]n structures grown by magnetron sputtering of Fe and Pt plates by varying number n of layers is studied. Mössbauer spectroscopy data and measured magnetic hysteresis loops demonstrate that the multilayer [Fe/Pt]n structures at n = 16 have a predominantly perpendicular magnetic anisotropy. The results of X-ray photoelectron spectroscopy and micromagnetic simulation point to the presence of intermediate layers enriched in iron ions in the structures. The magnetic anisotropy perpendicular to the surface of the [Fe/Pt]n films at n = 16 is found to be caused by the anisotropy of the intermediate layers. © 2014 Pleiades Publishing, Ltd