In Situ deposition of YBCO high-T(sub c) superconducting thin films by MOCVD and PE-MOCVD

Metalorganic Chemical Vapor Deposition (MOCVD) offers the advantages of a high degree of compositional control, adaptability for large scale production, and the potential for low temperature fabrication. The capability of operating at high oxygen partial pressure is particularly suitable for in situ formation of high temperature superconducting (HTSC) films. Yttrium barium copper oxide (YBCO) thin films having a sharp zero-resistance transition with T( sub c) greater than 90 K and Jc approx. 10 to the 4th power A on YSZ have been prepared, in situ, at a substrate temperature of about 800 C. Moreover, the ability to form oxide films at low temperature is very desirable for device applications of HTSC materials. Such a process would permit the deposition of high quality HTSC films with a smooth surface on a variety of substrates. Highly c-axis oriented, dense, scratch resistant, superconducting YBCO thin films with mirror-like surfaces have been prepared, in situ, at a reduced substrate temperature as low as 570 C by a remote microwave-plasma enhanced metalorganic chemical vapor deposition (PE-MOCVD) process. Nitrous oxide was used as a reactant gas to generate active oxidizing species. This process, for the first time, allows the formation of YBCO thin films with the orthorhombic superconducting phase in the as-deposited state. The as-deposited films grown by PE-MOCVD show attainment of zero resistance at 72 K with a transition width of about 5 K. MOCVD was carried out in a commercial production scale reactor with the capability of uniform deposition over 100 sq cm per growth run. Preliminary results indicate that PE-MOCVD is a very attractive thin film deposition process for superconducting device technology

In-situ deposition of YBCO high-Tc superconducting thin films by MOCVD and PE-MOCVD

Metal-Organic Chemical Vapor Deposition (MOCVD) offers the advantages of a high degree of compositional control, adaptability for large scale production, and the potential for low temperature fabrication. The capability of operating at high oxygen partial pressure is particularly suitable for in situ formation of high temperature superconducting (HTSC) films. Yttrium barium copper oxide (YBCO) thin films having a sharp zero-resistance transition with T(sub c) greater than 90 K and J(sub c) of approximately 10(exp 4) A on YSZ have been prepared, in situ, at a substrate temperature of about 800 C. Moreover, the ability to form oxide films at low temperature is very desirable for device applications of HTSC materials. Such a process would permit the deposition of high quality HTSC films with a smooth surface on a variety of substrates. Highly c-axis oriented, dense, scratch resistant, superconducting YBCO thin films with mirror-like surfaces have been prepared, in situ, at a reduced substrate temperature as low as 570 C by a remote microwave-plasma enhanced metal-organic chemical vapor deposition (PE-MOCVD) process. Nitrous oxide was used as a reactant gas to generate active oxidizing species. This process, for the first time, allows the formation of YBCO thin films with the orthorhombic superconducting phase in the as-deposited state. The as-deposited films grown by PE-MOCVD show attainment of zero resistance at 72 K with a transition width of about 5 K. MOCVD was carried out in a commercial production scale reactor with the capability of uniform deposition over 100 sq cm per growth run. Preliminary results indicate that PE-MOCVD is a very attractive thin film deposition process for superconducting device technology

Multiple feedback loops through cytokinin signaling control stem cell number within the Arabidopsis shoot meristem

A central unanswered question in stem cell biology, both in plants and in animals, is how the spatial organization of stem cell niches are maintained as cells move through them. We address this question for the shoot apical meristem (SAM) which harbors pluripotent stem cells responsible for growth of above-ground tissues in flowering plants. We find that localized perception of the plant hormone cytokinin establishes a spatial domain in which cell fate is respecified through induction of the master regulator WUSCHEL as cells are displaced during growth. Cytokinin-induced WUSCHEL expression occurs through both CLAVATA-dependent and CLAVATA-independent pathways. Computational analysis shows that feedback between cytokinin response and genetic regulators predicts their relative patterning, which we confirm experimentally. Our results also may explain how increasing cytokinin concentration leads to the first steps in reestablishing the shoot stem cell niche in vitro

The Association between women’s choice of birth setting and their use of CAM during labor and birth.

Purpose: Contemporary maternity care often means women are able to choose a number of settings for their birth including hospitals, birth centers, and community settings. There is also evidence that many women utilised complementary and alternative medicine (CAM) during pregnancy and birth. The purpose of this study is to examine the association between women’s choice of birth setting and their use of CAM during labor and birth. Methods: Longitudinal data from a sub-study of women (n = 2445) from the nationally-representative Australian Longitudinal Study of Women’s Health (ALSWH) was analyzed for relationships between women’s birth setting (hospital, birth center, or community) and their demographics, attitudes towards maternity care (including CAM), and use of CAM during pregnancy and birth. Results: The characteristics associated with women’s choice of birth setting include some demographic features such as employment status, health care subsidy, and level of education. Women’s birth setting choice was also linked to a preference for CAM practitioner by women birthing in birth centers and community settings. In contrast, women birthing in hospitals held more positive views towards obstetric care. There was a higher use of CAM during pregnancy by women birthing in birth centers and community but this was not consistent across all CAMs investigated. Naturopaths, herbal medicines, homeopathy and flower essences were more commonly used by women birthing in community compared with those in a birth center. There was also a higher rate of CAM use for intrapartum pain management for women birthing outside of a hospital setting, although women attending a birth center were more likely than those birthing in community to use pharmacological pain management techniques. Conclusion: There are characteristic differences between women birthing in different birth settings which seems to be influenced as much by preference for maternity care and interest in CAM use as it is by demographics

Combination of blood tests for significant fibrosis and cirrhosis improves the assessment of liver-prognosis in chronic hepatitis C

BACKGROUND: Recent longitudinal studies have emphasised the prognostic value of noninvasive tests of liver fibrosis and cross-sectional studies have shown their combination significantly improves diagnostic accuracy. AIM: To compare the prognostic accuracy of six blood fibrosis tests and liver biopsy, and evaluate if test combination improves the liver-prognosis assessment in chronic hepatitis C (CHC). METHODS: A total of 373 patients with compensated CHC, liver biopsy (Metavir F) and blood tests targeting fibrosis (APRI, FIB4, Fibrotest, Hepascore, FibroMeter) or cirrhosis (CirrhoMeter) were included. Significant liver-related events (SLRE) and liver-related deaths were recorded during follow-up (started the day of biopsy). RESULTS: During the median follow-up of 9.5 years (3508 person-years), 47 patients had a SLRE and 23 patients died from liver-related causes. For the prediction of first SLRE, most blood tests allowed higher prognostication than Metavir F [Harrell C-index: 0.811 (95% CI: 0.751-0.868)] with a significant increase for FIB4: 0.879 [0.832-0.919] (P = 0.002), FibroMeter: 0.870 [0.812-0.922] (P = 0.005) and APRI: 0.861 [0.813-0.902] (P = 0.039). Multivariate analysis identified FibroMeter, CirrhoMeter and sustained viral response as independent predictors of first SLRE. CirrhoMeter was the only independent predictor of liver-related death. The combination of FibroMeter and CirrhoMeter classifications into a new FM/CM classification improved the liver-prognosis assessment compared to Metavir F staging or single tests by identifying five subgroups of patients with significantly different prognoses. CONCLUSIONS: Some blood fibrosis tests are more accurate than liver biopsy for determining liver prognosis in CHC. A new combination of two complementary blood tests, one targeted for fibrosis and the other for cirrhosis, optimises assessment of liver-prognosis

Distribution of adipose tissue: Quantification and relationship with hepatic steatosis and vascular profiles of type 2 diabetic patients with metabolic syndrome

AimAs the distribution of fat is increasingly related to cardiovascular events, we examined whether or not abdominal-fat quantification using magnetic resonance imaging (MRI) software is reliable, and whether or not it is related to clinical markers of fat distribution as well as to metabolic and vascular status. Methods We recorded the anthropometric measurements of 34 obese type 2 diabetic patients with metabolic syndrome. The patients were enrolled to evaluate their abdominal (visceral and subcutaneous) adipose tissue by single-slice L3–L4 MRI. Manual and automated analyses were compared. The relationships between anthropometric measurements, biological markers and intima-media thickness of the common carotid artery were also assessed. Results We validated the automated software to quantify abdominal-fat deposition with MRI compared with manual measurements (r2 = 0.95). The waist-to-hip-circumference ratio (WHR) was the only clinical parameter that correlated with the proportion and quantity of visceral and subcutaneous abdominal-adipose tissue evaluated by MRI (r = 0.60). In addition, fat repartition as evaluated by WHR was related to hepatic steatosis parameters (ferritin and ALAT) and to intima-media thickness, whereas simple waist circumference was not a determinant in these obese patients. We also showed that the adiponectin-to-leptin ratio was related to adipose tissue distribution. Conclusion Distribution of abdominal fat, as evaluated by MRI, can be reflected by clinical determination of the WHR. Differences in regional accumulations of abdominal fat may be specifically related to variations in the risks of steatosis and vascular rigidity among obese type 2 diabetic patients