3,996 research outputs found
On the morphological deviation in additive manufacturing of porous Ti6Al4V scaffold: a design consideration
Additively manufactured Ti scaffolds have been used for bone replacement and orthopaedic applications. In these applications, both morphological and mechanical properties are important for their in vivo performance. Additively manufactured Ti6Al4V triply periodic minimal surface (TPMS) scaffolds with diamond and gyroid structures are known to have high stiffness and high osseointegration properties, respectively. However, morphological deviations between the as-designed and as-built types of these scaffolds have not been studied before. In this study, the morphological and mechanical properties of diamond and gyroid scaffolds at macro and microscales were examined. The results demonstrated that the mean printed strut thickness was greater than the designed target value. For diamond scaffolds, the deviation increased from 7.5 μm (2.5% excess) for vertical struts to 105.4 μm (35.1% excess) for horizontal struts. For the gyroid design, the corresponding deviations were larger, ranging from 12.6 μm (4.2% excess) to 198.6 μm (66.2% excess). The mean printed pore size was less than the designed target value. For diamonds, the deviation of the mean pore size from the designed value increased from 33.1 μm (-3.0% excess) for vertical struts to 92.8 μm (-8.4% excess) for horizontal struts. The corresponding deviation for gyroids was larger, ranging from 23.8 μm (-3.0% excess) to 168.7 μm (-21.1% excess). Compressive Young's modulus of the bulk sample, gyroid and diamond scaffolds was calculated to be 35.8 GPa, 6.81 GPa and 7.59 GPa, respectively, via the global compression method. The corresponding yield strength of the samples was measured to be 1012, 108 and 134 MPa. Average microhardness and Young's modulus from α and β phases of Ti6Al4V from scaffold struts were calculated to be 4.1 GPa and 131 GPa, respectively. The extracted morphology and mechanical properties in this study could help understand the deviation between the as-design and as-built matrices, which could help develop a design compensation strategy before the fabrication of the scaffolds
Control of rotorcraft retreating blade stall using air-jet vortex generators
A series of low-speed wind tunnel tests were carried out on an oscillating airfoil fitted with two rows of air-jet vortex generators (AJVGs). The airfoil used had an RAE 9645 section and the two spanwise arrays of AJVGs were located at x/c=0.12 and 0.62. The devices and their distribution were chosen to assess their ability to modify/control dynamic stall; the goal being to enhance the aerodynamic performance of helicopter rotors on the retreating blade side of the disc. The model was pitched about the quarter chord with a reduced frequency
(k) of 0.1 in a sinusoidal motion defined by a=15o+10sin_ t. The measured data indicate that, for continuous blowing from the front row of AJVGs with a momentum blowing coefficient (C μ) greater than 0.008, modifications to the stalling process are encouraging. In particular, the pitching moment behavior exhibits delayed stall and there is a marked reduction in the normal force hysteresis
Anonymous Single-Sign-On for n designated services with traceability
Anonymous Single-Sign-On authentication schemes have been proposed to allow
users to access a service protected by a verifier without revealing their
identity which has become more important due to the introduction of strong
privacy regulations. In this paper we describe a new approach whereby anonymous
authentication to different verifiers is achieved via authorisation tags and
pseudonyms. The particular innovation of our scheme is authentication can only
occur between a user and its designated verifier for a service, and the
verification cannot be performed by any other verifier. The benefit of this
authentication approach is that it prevents information leakage of a user's
service access information, even if the verifiers for these services collude
which each other. Our scheme also supports a trusted third party who is
authorised to de-anonymise the user and reveal her whole services access
information if required. Furthermore, our scheme is lightweight because it does
not rely on attribute or policy-based signature schemes to enable access to
multiple services. The scheme's security model is given together with a
security proof, an implementation and a performance evaluation.Comment: 3
Possible Jurassic age for part of Rakaia Terrane: implications for tectonic development of the Torlesse accretionary prism
Greywacke sandstone and argillite beds comprising Rakaia Terrane (Torlesse Complex) in mid Canterbury, South Island, New Zealand, are widely regarded as Late Triassic (Norian) in age based on the occurrence of Torlessia trace fossils, Monotis, and other taxa. This paleontological age assignment is tested using published 40Ar/39Ar mica and U-Pb zircon ages for these rocks and published and new zircon fission track (FT) ages. The youngest U-Pb zircon ages in the Rakaia Terrane rocks in mid Canterbury are Norian, whereas 10-20% of the 40Ar/39Ar muscovite ages are younger than Norian. Numerical modelling of these mica ages shows that they cannot have originated from partial thermal overprinting in the Torlesse prism if the thermal maximum was short-lived and early in the prism history (210-190 Ma), as commonly inferred for these rocks. The young component of mica ages could, however, be explained by extended residence (200-100 Ma) at 265-290deg.C in the prism. Early Jurassic (c. 189 Ma) zircon FT ages for sandstone beds from Arthur's Pass, the Rakaia valley, and the Hermitage (Mt Cook) are interpreted not to have experienced maximum temperatures above 210deg.C, and therefore cannot have been reduced as a result of partial annealing in the Torlesse prism. This is based on identification of a fossil Cretaceous, zircon FT, partial annealing zone in low-grade schists to the west, and the characteristics of the age data. The Early Jurassic zircon FT ages and the young component of 40Ar/39Ar mica ages are regarded therefore as detrital ages reflecting cooling in the source area, and constrain the maximum depositional age of parts of the Rakaia Terrane in mid Canterbury. The zircon FT data also show the initiation (c. 100 Ma) of marked and widespread Late Cretaceous cooling of Rakaia Terrane throughout Canterbury, which is attributed to uplift and erosion of inboard parts of the Torlesse prism due to continuing subduction accretion at its toe.
The critical wedge concept is proposed as a new framework for investigating the development of the Torlesse Complex. The Rakaia Terrane may have formed the core of an accretionary wedge imbricated against the New Zealand margin during the Middle or Late Jurassic. Late Jurassic nonmarine sediments (e.g., Clent Hills Formation) accumulated upon the inner parts of the prism as it enlarged, emerged, and continued to be imbricated. Exhumation of Otago Schist from c. 135 Ma may mark the development of a balance (steady state) between sediments entering the prism at the toe and material exiting at the inboard margin. The enlargement of the area of exhumation to all of Canterbury from c. 100 Ma may reflect a dynamic response to widening of the prism through the accretion of Cretaceous sediments. The model of a dynamic critical wedge may help to explain the various expressions of the Rangitata Orogeny
Targeting metastatic colorectal cancer with immune oncological therapies
Metastatic colorectal cancer carries poor prognosis, and current therapeutic regimes convey limited improvements in survival and high rates of detrimental side effects in patients that may not stand to benefit. Immunotherapy has revolutionised cancer treatment by restoring antitumoural mechanisms. However, the efficacy in metastatic colorectal cancer, is limited. A literature search was performed using Pubmed (Medline), Web of Knowledge, and Embase. Search terms included combinations of immunotherapy and metastatic colorectal cancer, primarily focusing on clinical trials in humans. Analysis of these studies included status of MMR/MSS, presence of combination strategies, and disease control rate and median overall survival. Evidence shows that immune checkpoint inhibitors, such as anti-PD1 and anti-PD-L1, show efficacy in less than 10% of patients with microsatellite stable, MMR proficient colorectal cancer. In the small subset of patients with microsatellite unstable, MMR deficient cancers, response rates were 40–50%. Combination strategies with immunotherapy are under investigation but have not yet restored antitumoural mechanisms to permit durable disease regression. Immunotherapy provides the potential to offer additional strategies to established chemotherapeutic regimes in metastatic colorectal cancer. Further research needs to establish which adjuncts to immune checkpoint inhibition can unpick resistance, and better predict which patients are likely to respond to individualised therapies to not just improve response rates but to temper unwarranted side effects
Self-trapping and excited state absorption in fluorene homo-polymer and copolymers with benzothiadiazole and tri-phenylamine
We thank the EPSRC [EP/J009318/1 and EP/J009016/1] for funding. MJP thanks the European Research Council (ERC) for funding under the European Union’s Seventh Framework Programme (FP7/2007-2013)/ERC Grant No. 258990.Excited state absorption (ESA) is studied using time-dependent density functional theory and compared with experiments performed in dilute solutions. The molecules investigated are a fluorene pentamer, polyfluorene F8, the alternating F8 copolymer with benzothiadiazole F8BT, and two blue-emitting random copolymers F8PFB and F8TFB. Calculated and measured spectra show qualitatively comparable results. The ESA cross-section of co-polymers at its maximum is about three times lower than that of F8. The ESA spectra are found to change little upon structural relaxation of the excited state, or change in the order of sub-units in a co-polymer, for all studied molecules. In all these molecules, the strongest ESA transition is found to arise from the same electronic process, exhibiting a reversal of the charge parity. In addition, F8PFB and F8TFB are found to possess almost identical electronic behaviour.Publisher PDFPeer reviewe
Levinson's theorem and scattering phase shift contributions to the partition function of interacting gases in two dimensions
We consider scattering state contributions to the partition function of a
two-dimensional (2D) plasma in addition to the bound-state sum. A partition
function continuity requirement is used to provide a statistical mechanical
heuristic proof of Levinson's theorem in two dimensions. We show that a proper
account of scattering eliminates singularities in thermodynamic properties of
the nonideal 2D gas caused by the emergence of additional bound states as the
strength of an attractive potential is increased. The bound-state contribution
to the partition function of the 2D gas, with a weak short-range attraction
between its particles, is found to vanish logarithmically as the binding energy
decreases. A consistent treatment of bound and scattering states in a screened
Coulomb potential allowed us to calculate the quantum-mechanical second virial
coefficient of the dilute 2D electron-hole plasma and to establish the
difference between the nearly ideal electron-hole gas in GaAs and the strongly
correlated exciton/free-carrier plasma in wide-gap semiconductors such as ZnSe
or GaN.Comment: 10 pages, 3 figures; new version corrects some minor typo
- …