Ultrathin epitaxial Fe films in vicinal GaAs(001): A study by spin-resolved photoelectron spectroscopy

Thin epitaxial Fe films have been grown on vicinal GaAs(001) substrates and their remanent magnetic properties and the degree of substrate atom diffusion investigated using synchrotron-based photoelectron spectroscopy. The vicinal Fe films, though exhibiting greater As diffusion than their singular homologues, displayed better film quality both from the structural and the magnetic points of view. The spin-resolved valence spectra of the vicinal films resemble those for crystalline bulk Fe at lower film thicknesses than for singular films

An Examination Of The Adaptive Random Search Technique

Random search procedures have recently been successfully applied to the optimization of a variety of chemical engineering problems, including optimization of chemical processes by flow sheet simulation. These procedures represent the independent variables as random variables described by probability distributions. The adaptive random search procedure centers the distribution for each variable about the best search point found and examines this region for a better point. Thus, this technique has the ability of continuously moving the search region toward the optimum, which is particularly advantageous in following constraints. This study examines the efficiency of the adaptive random search technique as applied to six different problems, which have been previously solved by various other techniques. Copyright © 1976 American Institute of Chemical Engineer

Fe3O4(001) films on Fe(001): Termination and reconstruction of iron-rich surfaces

High-quality and impurity-free magnetite surfaces with (sqrt2xsqrt2)R45o reconstruction have been obtained for the Fe3O4(001) epitaxial films deposited on Fe(001). Based on atomically resolved STM images for both negative and positive sample polarity and Density Functional Theory calculations, a model of the magnetite (001) surface terminated with Fe ions forming dimers on the reconstructed (sqrt2xsqrt2)R45o octahedral iron layer is proposed.Comment: 17 pages 4 figure

Material and energy flows in the materials production, assembly, and end-of-life stages of the automotive lithium-ion battery life cycle

This document contains material and energy flows for lithium-ion batteries with an active cathode material of lithium manganese oxide (LiMn{sub 2}O{sub 4}). These data are incorporated into Argonne National Laboratory's Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model, replacing previous data for lithium-ion batteries that are based on a nickel/cobalt/manganese (Ni/Co/Mn) cathode chemistry. To identify and determine the mass of lithium-ion battery components, we modeled batteries with LiMn{sub 2}O{sub 4} as the cathode material using Argonne's Battery Performance and Cost (BatPaC) model for hybrid electric vehicles, plug-in hybrid electric vehicles, and electric vehicles. As input for GREET, we developed new or updated data for the cathode material and the following materials that are included in its supply chain: soda ash, lime, petroleum-derived ethanol, lithium brine, and lithium carbonate. Also as input to GREET, we calculated new emission factors for equipment (kilns, dryers, and calciners) that were not previously included in the model and developed new material and energy flows for the battery electrolyte, binder, and binder solvent. Finally, we revised the data included in GREET for graphite (the anode active material), battery electronics, and battery assembly. For the first time, we incorporated energy and material flows for battery recycling into GREET, considering four battery recycling processes: pyrometallurgical, hydrometallurgical, intermediate physical, and direct physical. Opportunities for future research include considering alternative battery chemistries and battery packaging. As battery assembly and recycling technologies develop, staying up to date with them will be critical to understanding the energy, materials, and emissions burdens associated with batteries

History in the Making: Outreach and Collaboration between Special Collections and Makerspaces

Makerspaces present unique possibilities for creative partnerships within libraries, including the opportunity for interdisciplinary use of emerging technologies with archival objects and primary sources. One example of this type of interdisciplinary collaboration is the fabrication of cultural heritage replicas via 3D scanning and printing of historical university objects in academic libraries. Two departments in the University of Idaho Library, Special Collections and Archives (SPEC) and the Making, Innovating, and Learning Laboratory (MILL), partnered on such a project as a way to broaden maker competencies across library departments, leverage interdisciplinary connections between emerging technologies and historic archives, and create innovative outreach opportunities. Since many academic libraries house both special collections and makerspaces, this article outlines a path towards creative collaboration while creating an in-library maker community of practice and suggests opportunities for outreach and engagement that are widely applicable to library professionals

ELEMENT LEVELS IN SNAKES IN SOUTH CAROLINA: DIFFERENCES BETWEEN A CONTROL SITE AND EXPOSED SITE ON THE SAVANNAH RIVER SITE

Levels of 18 elements, including lead, mercury, selenium, and uranium, were examined in three species of snakes from an exposed and reference site on the Department of Energy’s Savannah River Site in South Carolina. We tested the hypotheses that there were no differences as a function of species, and there were no difference between the exposed and control site for blood and muscle (tail) samples for banded water snake (Nerodia fasciata), brown water snake (N. taxispilota) and cottonmouth (Akistrodon piscivorous). The banded water snakes collected were significantly smaller than the other two species. For blood, there were significant species differences only for barium, copper, selenium, uranium and zinc, while for muscle tissue there were significant interspecific differences in aluminum, arsenic, barium, cobalt, cesium, copper, iron, lead, mercury, manganese, strontium, vanadium and zinc, suggesting that muscle tissue in the tail is a better indicator of potential interspecific differences. It is also easier logistically to collect tail tissue than blood. Where one species had significantly higher levels than the other species in muscle tissue levels, cottonmouth had higherlevels of five elements (aluminum, cobalt, lead, mercury, vanadium), brown water snake had two (lead, strontium), and banded water snake had only barium. There were few significant differences between the control and reference site for levels of blood, but several for muscle tissue. All three species had significantly higher levels of arsenic and manganese at Tim’s Branch than the reference site, and nickel and uranium were significantly higher for banded watersnake and cottonmouth, the larger species. Individuals with high exposure of one element were exposed to high levels of other elements

ELEMENT LEVELS IN SNAKES IN SOUTH CAROLINA: DIFFERENCES BETWEEN A CONTROL SITE AND EXPOSED SITE ON THE SAVANNAH RIVER SITE

Levels of 18 elements, including lead, mercury, selenium, and uranium, were examined in three species of snakes from an exposed and reference site on the Department of Energy’s Savannah River Site in South Carolina. We tested the hypotheses that there were no differences as a function of species, and there were no difference between the exposed and control site for blood and muscle (tail) samples for banded water snake (Nerodia fasciata), brown water snake (N. taxispilota) and cottonmouth (Akistrodon piscivorous). The banded water snakes collected were significantly smaller than the other two species. For blood, there were significant species differences only for barium, copper, selenium, uranium and zinc, while for muscle tissue there were significant interspecific differences in aluminum, arsenic, barium, cobalt, cesium, copper, iron, lead, mercury, manganese, strontium, vanadium and zinc, suggesting that muscle tissue in the tail is a better indicator of potential interspecific differences. It is also easier logistically to collect tail tissue than blood. Where one species had significantly higher levels than the other species in muscle tissue levels, cottonmouth had higherlevels of five elements (aluminum, cobalt, lead, mercury, vanadium), brown water snake had two (lead, strontium), and banded water snake had only barium. There were few significant differences between the control and reference site for levels of blood, but several for muscle tissue. All three species had significantly higher levels of arsenic and manganese at Tim’s Branch than the reference site, and nickel and uranium were significantly higher for banded watersnake and cottonmouth, the larger species. Individuals with high exposure of one element were exposed to high levels of other elements

Effects of cooking on radiocesium in fish from the Savannah River: exposure differences for the public

Understanding the factors that contribute to the risk from fish consumption is an important public health concern because of potential adverse effects of radionuclides, organochlorines, other pesticides, and mercury. Risk from consumption is normally computed on the basis of contaminant levels in fish, meal frequency, and meal size, yet cooking practices may also affect risk. This study examines the effect of deep-frying on radiocesium (137Cs) levels and risk to people fishing along the Savannah River. South Carolina and Georgia have issued consumption advisories for the Savannah River, based partly on 137Cs. 137Cs levels were significantly higher in the cooked fish compared to the raw fish on a wet weight basis. Mean 137Cs levels were 0.61 pCi/g (wet weight basis) in raw fish, 0.81 pCi/g in cooked-breaded, and 0.99 pCi/g in cooked-unbreaded fish. Deep-frying with and without breading resulted in a weight loss of 25 and 39%, while 137Cs levels increased by 32 and 62%, respectively. Therefore, the differences were due mainly to weight loss during cooking. However, the data suggest that risk assessments should be based on cooked portion size for contaminant analysis, or the risk from 137Cs in fish will be underestimated. People are likely to estimate the amounts of fish they eat based on a meal size of the cooked portion, while risk assessors determine 137Cs levels in raw fish. A conversion factor of at least two for 137Cs increase during cooking is reasonable and conservative, given the variability in 137Cs levels. The data also suggest that surveys determining consumption should specifically ask about portion size before or after cooking and state which was used in their methods

Overview and status of the 0.5NA EUV microfield exposure tool at Berkeley Lab

A 0.5-NA extreme ultraviolet micro-field exposure tool has been installed and commissioned at beamline 12.0.1.4 of the Advanced Light Source synchrotron facility at Lawrence Berkeley National Laboratory. Commissioning has demonstrated a patterning resolution of 13 nm half-pitch with annular 0.35-0.55 illumination; a patterning resolution of 8 nm half-pitch with annular 0.1-0.2 illumination; critical dimension (CD) uniformity of 0.7 nm 1σ on 16 nm nominal CD across 80% of the 200 um x 30 um aberration corrected field of view; aerial image vibration relative to the wafer of 0.75 nn RMS and focus control and focus stepping better than 15 nm