1,051 research outputs found
Understanding and modeling unstarting phenomena in a supersonic inlet cascade
The renewed interest in supersonic turbomachinery research was driven by its potential applications in emerging fields. However, the design of supersonic inlet cascades faces significant challenges due to the inherent limitations of supersonic flows. While several studies have been published on the unstarting of supersonic intakes, there exists a major knowledge gap in the unstarting of supersonic blade rows. This paper presents the research on a novel unstarting mechanism for supersonic inlet cascades induced by the formation of a collective shock. Tailored simulations were carried out to study the coalescence of the leading-edge bow shock waves and to investigate the stability and the hysteresis of this phenomenon. Then, a reduced order model was developed and verified to estimate the limit induced by this additional unstarting mechanism. Since the accuracy of the unstarting condition relies heavily on the predicted bow shock shape, novel strategies were proposed to improve the estimate of the asymptotic slope of the bow shock and to account for large incidence angles. Furthermore, the well-known Kantrowitz criterion for the self-starting of a supersonic channel was reviewed and adapted to supersonic blade rows by considering both weak and strong oblique shock waves in the calculation of the maximum contract ratio. Then, it was demonstrated the importance of accounting for shock-induced boundary layer separation in the starting process of a supersonic machine. Finally, computational fluid dynamics simulations reveal the high sensitivity of the self-starting limit to the cascade solidity and profile shape
Shock Tube Flows Past Partially Opened Diaphragms
Unsteady compressible flows resulting from the incomplete burst of the shock tube
diaphragm are investigated both experimentally and numerically for different initial
pressure ratios and opening diameters. The intensity of the shock wave is found
to be lower than that corresponding to a complete opening. A heuristic relation is
proposed to compute the shock strength as a function of the relative area of the
open portion of the diaphragm. Strong pressure oscillations past the shock front are
also observed. These multi-dimensional disturbances are generated when the initially
normal shock wave diffracts from the diaphragm edges and reflects on the shock
tube walls, resulting in a complex unsteady flow field behind the leading shock wave.
The limiting local frequency of the pressure oscillations is found to be very close to the
ratio of acoustic wave speed in the perturbed region to the shock tube diameter. The
power associated with these pressure oscillations decreases with increasing distance
from the diaphragm since the diffracted and reflected shocks partially coalesce into
a single normal shock front. A simple analytical model is devised to explain the
reduction of the local frequency of the disturbances as the distance from the leading
shock increases
TURBULENCE MEASUREMENTS DOWNSTREAM OF A COMBUSTOR SIMULATOR DESIGNED FOR STUDIES ON THE COMBUSTOR-TURBINE INTERACTION
Natural risk assessment and decision planning for disaster mitigation
International audienceIn this paper, decisional models are introduced aiming at defining a general framework for natural disaster mitigation. More specifically, an integrated approach based on system modelling and optimal resource assignment is presented in order to support the decision makers in pre-operational and real-time management of forest fire emergencies. Some strategies for pre-operative and real time risk management will be described and formalized as optimal resource assignment problems. To this end, some models capable to describe the resources dynamics will be introduced, both in pre-operative phase and in real-time phase
Phase behavior of wormlike rods
By employing Molecular Dynamics computer simulations, the phase behavior of
systems of rodlike particles with varying degree of internal flexibility has
been traced from the perfectly rigid rod limit till very flexible particles,
and from the high density region till the isotropic phase. From the perfectly
rigid rod limit and enhancing the internal flexibility, the range of the
smectic A phase is squeezed out by the concomitant action of the scarcely
affected crystalline phase at higher density and the nematic phase at lower
density, until it disappears. These results confirm the supposition, drawn from
previous theoretical, simulational and experimental studies, that the smectic A
phase is destabilized by introducing and enhancing the degree of particle
internal flexibility. However, no significant changes in the order of
nematic--to--smectic A phase transition, which appears always first order, nor
in the value of the layer spacing, are observed upon varying the degree of
particle internal flexibility. Moreover, no evidence of a columnar phase, which
was tought of as a possible superseder of the smectic A phase in flexible rods,
has been obtained.Comment: 10 pages, 2 figures, version accepted in Physical Review
An exploration UX Automotive in the 5G era: New interaction processes through gesture control and haptic feedback.
Cars are becoming smart devices with intelligent interfaces that fit into the smart driving environment, able to connect and coordinate with each other to ensure seamless user adoption. This is the context for the BASE5G project, a multidisciplinary project that aims to harness the potential of 5G connectivity to design adaptive urban environments in which cars are part of complex, infrastructure-integrated systems. The proposed work recounts the experience of designing the interior of a shared self driving vehicle, with a focus on interface design. The interface design explores a touchless user interaction model involving a gesture-based control system implemented by haptic feedback. The project aims to explore a design scenario for an experiential car interface and interior that considers new visualisation and interaction paradigms in future mobility
A Prosthetic Limb Managed by Sensors-Based Electronic System: Experimental Results on Amputees
Taking the advantages offered by smart high-performance electronic devices, transradial prosthesis for upper-limb amputees was developed and tested. It is equipped with sensing devices and actuators allowing hand movements; myoelectric signals are detected by Myo armband with 8 ElectroMyoGraphic (EMG) electrodes, a 9-axis Inertial Measurement Unit (IMU) and Bluetooth Low Energy (BLE) module. All data are received through HM-11 BLE transceiver by Arduino board which processes them and drives actuators. Raspberry Pi board controls a touchscreen display, providing user a feedback related to prosthesis functioning and sends EMG and IMU data, gathered via the armband, to cloud platform thus allowing orthopedic during rehabilitation period, to monitor users’ improvements in real time. A GUI software integrating a machine learning algorithm was implemented for recognizing flexion/extension/rest gestures of user fingers. The algorithm performances were tested on 9 male subjects (8 able-bodied and 1 subject affected by upper-limb amelia), demonstrating high accuracy and fast responses
Nitrogen Experiments on a Supersonic Linear Cascade For ORC Applications
A novel experiment has been conceived at Politecnico di Milano for the study of the flow within and downstream of supersonic cascades of Organic Rankine Cycle (ORC) turbines. This paper documents the first phase of the research, focused on the preliminary tests and studies performed by operating the facility with nitrogen as working fluid, to demonstrate the technical relevance of the experiment and the validity of the measurement system in a simplified thermodynamic condition. The set of measured data includes, beside the inlet total thermodynamic state, eight static pressure values obtained via taps manufactured on the test section rear end-wall, both within the bladed and semi-bladed region of the cascade, as well as a total pressure probe to retrieve the cascade performance. A double-passage Schlieren equipment was also employed to visualize the density gradients. Experiments show an outstanding repeatability, indicate a quasi -steady cascade operation during the blow-down process for all the pressure signal considered, and demonstrate a remarkable periodicity among two consecutive channels also in off-design conditions. Experimental data were also compared with CFD simulations, resulting in an excellent agreement for the pressure data acquired both within and downstream of the cascade
DESIGN AND COMPUTATIONAL ASSESSMENT OF A SUPERCRITICAL CO2 COMPRESSOR FOR WASTE HEAT RECOVERY APPLICATIONS
Experimental and Numerical Performance Survey of a MW-Scale Supercritical CO2 Compressor Operating in Near-Critical Conditions
Closed power cycles based on carbon dioxide in supercritical conditions (sCO2 in the following) are experiencing a growing scientific, technical and industrial interest, due to the high energy conversion efficiency and components compactness. Despite these advantages, the use of a working fluid operating in proximity to the critical point, especially for the compressor, entails multidisciplinary challenges related to the severe non-ideality of the supercritical fluid, which includes the potential onset of phase change at the impeller intake. On the technical and industrial grounds, the phase-transition might dramatically affect the aerodynamics, the performance and the rangeability of the compressor. On the scientific ground, the modelling of two-phase flows in transonic/supersonic conditions still remains an open issue that demands a thorough experimental assessment.
This work illustrates the results of a wide experimental campaign focused on the evaluation of the operative map of a MW-scale high-load sCO2 compressor operating in plant-representative conditions, i.e. in proximity to the critical point (P = 79.8 bar, T = 33°C), designed in the frame of the sCO2Flex project, EU Horizon 2020 funded program (grant agreement #764690). In the design process, the machine had been object of a thorough computational investigation, performed by using a homogeneous equilibrium model equipped with a barotropic equation of state, which revealed a significant impact of the phase change on the compressor aerodynamics and on its rangeability for flow rates higher than the design one. Such phenomena are connected to the sudden drop of the speed of sound, originated when the fluid thermodynamic condition crosses the saturation line, and they weaken as the compressor loading reduces. Experiments carried out on a first of a kind 5 MW sCO2 prototype compressor manufactured and tested by Baker Hughes in 2021 remarkably well matched the predicted compressor performance and, especially, the anticipated and sudden choking of the compressor at nominal peripheral Mach number.
Results demonstrates experimentally, for the first time ever, the effects of the phase-change on the operation of a realistic sCO2 compressor, also providing significant insights on the predictive capabilities of the physical models employed for the calculation of two-phase flows in this class of machines
- …