2,726 research outputs found

    Processing and characterisation of High-Velocity Suspension Flame Sprayed (HVSFS) bioactive glass coatings

    Get PDF
    The High-Velocity Suspension Flame Spraying (HVSFS) technique was employed in order to deposit bioactive glass coatings onto titanium substrates. Two different glass compositions were examined: the classical 45S5 Bioglass and a newly-developed SiO2–CaO–K2O–P2O5 glass, labelled as “Bio-K”. Suitable raw materials were melted in a furnace and fritted by casting into water. The frit was dry-milled in a porcelain jar and subsequently attrition-milled in isopropanol. The resulting micron- sized powders were dispersed in a water+isopropanol mixture, in order to prepare suitable suspensions for the HVSFS process. The deposition parameters were varied; however, all coatings were obtained by performing three consecutive torch cycles in front of the substrate. The thickness and porosity of the coatings were significantly affected by the chosen set of deposition parameters; however, in all cases, the layer produced during the third torch cycle was thicker and denser than the one produced during the first cycle. As the system temperature increases during the spraying process, the particles sprayed during the last torch cycle remain at T > Tg while they spread, so that interlamellar viscous flow sintering takes place, favouring the formation of such denser microstructure. Both coatings are entirely glassy; however, micro-Raman spectroscopy reveals that, whereas the 45S5 coating is structurally identical to the corresponding bulk glass, the “Bio-K” coating is somewhat different from the bulk one

    Effect of the suspension composition on the microstructural properties of high velocity suspension flame sprayed (HVSFS) Al2O3 coatings

    Get PDF
    Seven different Al2O3-based suspensions were prepared by dispersing two nano-sized Al2O3 powders (having analogous size distribution and chemical composition but different surface chemistry), one micron-sized powder and their mixtures in a water+isopropanol solution. High velocity suspension flame sprayed (HVSFS) coatings were deposited using these suspensions as feedstock and adopting two different sets of spray parameters. The characteristics of the suspension, particularly its agglomeration behaviour, have a significant influence on the coating deposition mechanism and, hence, on its properties (microstructure, hardness, elastic modulus). Dense and very smooth (Ra ~ 1.3 μm) coatings, consisting of well- flattened lamellae having a homogeneous size distribution, are obtained when micron-sized (~1 -2 μm) powders with low tendency to agglomeration are employed. Spray parameters favouring the break-up of the few agglomerates present in the suspension enhance the deposition efficiency (up to >50%), as no particle or agglomerate larger than ~2.5 μm can be fully melted. Nano-sized powders, by contrast, generally form stronger agglomerates, which cannot be significantly disrupted by adjusting the spray parameters. If the chosen nanopowder forms small agglomerates (up to few microns), the deposition efficiency is satisfactory and the coating porosity is limited, although the lamellae generally have a wider size distribution, so that roughness is somewhat higher. If the nanopowder forms large agglomerates (on account of its surfacechemistry), poor deposition efficiencies and porous layers are obtained. Although suspensions containing the pure micron-sized powder produce the densest coatings, the highest deposition efficiency (~70%) is obtained by suitable mixtures of micron-and nano-sized powders, on account of synergistic effect

    The treatment of severe child aggression (TOSCA) study: Design challenges

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Polypharmacy (the concurrent use of more than one psychoactive drug) and other combination interventions are increasingly common for treatment of severe psychiatric problems only partly responsive to monotherapy. This practice and research on it raise scientific, clinical, and ethical issues such as additive side effects, interactions, threshold for adding second drug, appropriate target measures, and (for studies) timing of randomization. One challenging area for treatment is severe child aggression. Commonly-used medications, often in combination, include psychostimulants, antipsychotics, mood stabilizers, and alpha-2 agonists, which vary considerably in terms of perceived safety and efficacy.</p> <p>Results</p> <p>In designing our NIMH-funded trial of polypharmacy, we focused attention on the added benefit of a second drug (risperidone) to the effect of the first (stimulant). We selected these two drugs because their associated adverse events might neutralize each other (e.g., sleep delay and appetite decrease from stimulant versus sedation and appetite increase from antipsychotic). Moreover, there was considerable evidence of efficacy for each drug individually for the management of ADHD and child aggression. The study sample comprised children (ages 6-12 years) with both diagnosed ADHD and disruptive behavior disorder (oppositional-defiant or conduct disorder) accompanied by severe physical aggression. In a staged sequence, the medication with the least problematic adverse effects (stimulant) was openly titrated in 3 weeks to optimal effect. Participants whose behavioral symptoms were not normalized received additional double-blind medication, either risperidone or placebo, by random assignment. Thus children whose behavioral symptoms were normalized with stimulant medication were not exposed to an antipsychotic. All families participated in an empirically-supported parent training program for disruptive behavior, so that the actual comparison was stimulant+parent training versus stimulant+antipsychotic+parent training.</p> <p>Conclusions</p> <p>We hope that the resolutions of the challenges presented here will be useful to other investigators and facilitate much-needed research on child psychiatric polypharmacy.</p> <p>Trial Registration</p> <p>ClinicalTrials.gov <a href="http://www.clinicaltrials.gov/ct2/show/NCT00796302">NCT00796302</a></p

    Stability subtypes of callous–unemotional traits and conduct disorder symptoms and their correlates

    Get PDF
    Callous unemotional traits and conduct disorder symptoms tend to co-occur across development, with existing evidence pointing to individual differences in the co-development of these problems. The current study identified groups of at risk adolescents showing stable (i.e., high on both conduct disorder and callous-unemotional symptoms, high only on either callous-unemotional or conduct disorder symptoms) or increasing conduct disorder and callous-unemotional symptoms. Data were collected from a sample of 2038 community adolescents between 15 and 18 years (1070 females, Mage = 16) of age. A longitudinal design was followed in that adolescent reports were collected at two time points, one year apart. Increases in conduct disorder symptoms and callous-unemotional traits were accompanied by increases in anxiety, depressive symptoms, narcissism, proactive and reactive aggression and decreases in self-esteem. Furthermore, adolescents with high and stable conduct disorder symptoms and callous-unemotional traits were consistently at high risk for individual, behavioral and contextual problems. In contrast, youth high on callous-unemotional traits without conduct disorder symptoms remained at low-risk for anxiety, depressive symptoms, narcissism, and aggression, pointing to a potential protective function of pure callous-unemotional traits against the development of psychopathological problems

    Effects of an open-label pilot study with high-dose EPA/DHA concentrates on plasma phospholipids and behavior in children with attention deficit hyperactivity disorder

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Attention deficit hyperactivity disorder (ADHD) is the most common neurological condition in children. This pilot study evaluated the effects of high-dose eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) supplementation on the isolated plasma phospholipids and behavior in children with ADHD (primarily inattentive subtype and combined subtype).</p> <p>Methods</p> <p>Nine children were initially supplemented with 16.2 g EPA/DHA concentrates per day. The dosage was adjusted dependent on the ratio of arachidonic acid (AA) to EPA in the isolated plasma phospholipids at four weeks to reach a level normally found in the Japanese population.</p> <p>Results</p> <p>At the end of the eight-week study, supplementation resulted in significant increases in EPA and DHA, as well as a significant reduction in the AA:EPA ratio (20.78 ± 5.26 to 5.95 ± 7.35, p < 0.01). A psychiatrist (blind to supplement compliance or dosage modifications) reported significant improvements in behavior (inattention, hyperactivity, oppositional/defiant behavior, and conduct disorder). There was also a significant correlation between the reduction in the AA:EPA ratio and global severity of illness scores.</p> <p>Conclusion</p> <p>The findings of this small pilot study suggest supplementation with high-dose EPA/DHA concentrates may improve behavior in children with ADHD.</p

    Association of candidate gene polymorphisms with clinical subtypes of preterm birth in a Latin American population

    Get PDF
    Background. Preterm birth (PTB) is the leading cause of neonatal mortality and morbidity. PTB is often classified according to clinical presentation: Idiopathic (PTB-I), preterm premature rupture of membranes (PTB-PPROM), and medically induced (PTBM). The aim of this study was to evaluate the associations between specific candidate genes and clinical subtypes of PTB. Methods. 24 SNPs were genotyped in 18 candidate genes in 709 infant triads. Of them, 243 were PTB-I, 256 PTB-PPROM, and 210 PTB-M. These data were analyzed with a Family-Based Association. Results. PTB was nominally associated with rs2272365 in PON1, rs883319 in KCNN3, rs4458044 in CRHR1, and rs610277 in F3. Regarding clinical subtypes analysis, 3 SNPs were associated with PTB-I (rs2272365 in PON1, rs10178458 in COL4A3, and rs4458044 in CRHR1), rs610277 in F3 was associated with PTBPPROM, and rs883319 in KCNN3 and rs610277 in F3 were associated with PTB-M. Conclusions. Our study identified polymorphisms potentially associated with specific clinical subtypes of PTB in this Latin American population. These results could suggest a specific role of such genes in the mechanisms involved in each clinical subtype. Further studies are required to confirm our results and to determine the role of these genes in the pathophysiology of clinical subtypes

    Deposizione di rivestimenti in Al2O3 mediante High Velocity Suspension Flame Spraying (HVSFS): caratteristiche dei riporti ed effetto dei parametri operativi

    Get PDF
    La tecnica denominata HVSFS (High Velocity Suspension Flame Spraying) è un processo di termospruzzaturainnovativo che, alimentando la torcia con una sospensione di particelle finissime (micro- o nano-metriche)disperse in una fase liquida, permette la deposizione di rivestimenti ceramici ad alta densità e basso spessore(&lt;100 ?m). Per approfondire la relazione fra caratteristiche dei riporti e proprietà della sospensione, varirivestimenti a base di Al2O3 sono stati depositati utilizzando sospensioni di particelle sia micrometriche, siananometriche. Indipendentemente dai parametri di processo selezionati, una sospensione di particellemicrometriche sufficientemente disperse garantisce maggior efficienza di deposizione (&gt;50%) e producerivestimenti costituiti da un’ottima sovrapposizione di lamelle fortemente coese, con maggior durezza(?1200 HV0.05) e minor rugosità (Ra ? 1.3 ?m) rispetto ai rivestimenti ottenibili con sospensioni dinanoparticelle. Sebbene i rivestimenti ottenuti da sospensioni di particelle micrometriche siano anche soggettia tensioni residue trattive più elevate (fra 50 MPa e 100 MPa), la loro eccellente densità e ottima coesione lirendono molto più resistenti all’usura per strisciamento (studiata con test “ball on disk”) rispetto a riporti diAl2O3 prodotti sia con sospensioni di nanoparticelle, sia con tecniche di termospruzzatura convenzionali
    corecore