Elemental Variability of PM_2.5 Aerosols in Historical and Modern Areas of Jeddah, Saudi Arabia

Air particulate matter with a diameter of 2.5 µm (PM2.5) were assembled for a whole year from the historical Jeddah district. Additional PM2.5 aerosols were collected during the autumn and winter seasons from another newly constructed district in Jeddah city (Alnaeem). The annual concentration of the total mass of the PM2.5 aerosols from the historical Jeddah site was found to be 43 ± 6 µg/m3. In addition, the average of the total mass concentration at the Alnaeem site was 61 ± 14 µg/m3. These values were greater than the annual mass concentration of the air quality standards of the European Commission (25 µg/m3) and the World Health Organization (10 µg/m3). The elemental analysis of the collected fine atmospheric aerosols was achieved by energy dispersive X-ray fluorescence (EDXRF) with three secondary targets (CaF2, Ge, and Mo). Quantitative elemental analyses of twenty-two (22) elements were achieved starting from the low atomic number element (Na) up to the high atomic number element (Pb). Although the historical Jeddah site is not well organized, the elemental concentrations and total mass concentrations were lower than those of the other site. The statistical analyses including enrichment factors, correlation analysis, and the principal component analysis revealed more information about the source identification of the PM2.5 aerosols collected from both locations. It was recognized that the elements Al, Si, K, Ca, Ti, Mn, Fe, Rb, and Sr originated from a natural source. On the other hand, the elements Ta, Br, Pb, Sc, Ni, Cu, Zn, and S originated from anthropogenic sources. Finally, the elements Na, Cl, and Br came mainly from the sea spray source

The role of ascorbic acid combined exposure on Imidacloprid-induced oxidative stress and genotoxicity in Nile tilapia

Imidacloprid (Imid), a systemic neonicotinoid insecticide, is broadly used worldwide. It is reported to contaminate aquatic systems. This study was proposed to evaluate oxidative stress and genotoxicity of Imid on Nile tilapia (Oreochromis niloticus) and the protective effect of ascorbic acid (Asc). O. niloticus juveniles (30.4 +/- 9.3 g, 11.9 +/- 1.3 cm) were divided into six groups (n=10/replicate). For 21 days, two groups were exposed to sub-lethal concentrations of Imid (8.75 ppm, 1/20 of 72 h-LC50 and 17.5 ppm, 1/10 of 72 h-LC50); other two groups were exposed to Asc (50 ppm) in combination with Imid (8.75 and 17.5 ppm); one group was exposed to Asc (50 ppm) in addition to a group of unexposed fish which served as controls. Oxidative stress was assessed in the liver where the level of enzymatic activities including superoxide dismutase (SOD), catalase (CAT) and glutathione peroxidase (GPX) in addition to mRNA transcripts and, Lipid peroxidation (LPO) were evaluated. Moreover, mitotic index (MI) and comet assay were performed, in addition, the erythrocytic micronucleus (MN), and nuclear abnormalities (NA) were observed to assess genotoxicity in fish. Imid exposure induced significant (p?0.05) changes in the antioxidant profile of the juveniles' liver by increasing the activities and gene expression of SOD, CAT and GPX as well as elevating the levels of LPO. DNA strand breaks in gill cells, erythrocytes and hepatocytes along with erythrocytic MN and NA were also significantly elevated in Imid-exposed groups. MI showed a significant (p?0.05) decrease associated with Imid exposure. Asc administration induced a significant amelioration towards the Imid toxicity (8.75 and 17.5 ppm). A significant protective potency against the genotoxic effects of Imid was evidenced in Asc co-treated groups. Collectively, results highlight the importance of Asc as a protective agent against Imid-induced oxidative stress and genotoxicity in O. niloticus juveniles

Unravelling the beehive air volatiles profile as analysed via solid-phase microextraction (SPME) and chemometrics

Objective: Beehive air therapy is recognized as a potential remedy for treating asthma, bronchitis, lung fibrosis, and respiratory tract infections. Developed countries in which beehive air therapy is currently authorized include Germany, Hungary, Slovenia, and Austria. However, scientific proof of its efficacy is lacking which warrants further chemical and biological analyses as a proof of concept. In this study, bee-hive air volatile profile was determined for the first time along with its individual components (bees, venom, honey, and beeswax). Methods: Volatile compounds were collected from beehive air using solid phase micro-extraction (SPME) coupled to gas chromatography-mass spectrometry (GC-MS). Antimicrobial assay of the air released from 4 beehive products was further performed against Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, and multi drug-resistant Staphylococcus aureus (MRSA) using the in vitro agar-well diffusion and microtiter plate assays. Results and conclusions: A total of 56 volatile compounds were identified from beehive air, venom, bee insect and wax air including 6 fatty acids, 6 alcohols, 10 aldehydes, 5 esters, 1 ether, 9 hydrocarbons, 1 phenol, 7 ketones, 1 nitrogenous compound and 10 terpenes. The most abundant constituents were short-chain fatty acids (26.32%) while the lowest were the nitrogenous compounds (0.82%). The principal component analysis (PCA) scores plot of the UPLC/MS dataset showed the similarity of the beehive air to the insect bee's aroma profile. With regards to antimicrobial assay, beehive air and venom exerted the strongest antimicrobial activity among the examined bee products against S. aureus, K. pneumoniae, A. baumannii, and MRSA in agar-well diffusion assay but failing to exert an effect using microtiter plate assay as in case of bee venom against the aforementioned bacteria

Angiotensinogen Gene Missense Polymorphisms (rs699 and rs4762) : The Association of End-Stage Renal Failure Risk with Type 2 Diabetes and Hypertension in Egyptians

Type 2 diabetes mellitus (T2DM) and hypertension are common chronic diseases mainly associated with the development and progression of end-stage renal disease (ESRD) leading to morbidity and mortality. Gene polymorphisms linked to the renin–angiotensin (AGT)–aldosterone system (RAAS) were broadly inspected in patients with diabetic nephropathy (DN) and hypertension. This study aimed to investigate the association of AGT gene polymorphisms (rs699 and rs4762) with ESRD in T2DM hypertensive Egyptian patients. Genotyping of rs699 and rs4762 was conducted using the tetra-primers amplification refractory mutation system (ARMS-PCR). The allelic distribution analysis was performed on 103 healthy control subjects, 97 non-ESRD patients, and 104 patients with ESRD. The allelic frequencies of AGT gene polymorphisms (rs4762 and rs699) in all study participants were assessed. For the non-ESRD group, the frequencies of the alleles of AGT-rs4762 (χ2 = 31.88, p < 0.001, OR = 5.17, CI 95%: 2.81–9.51) and AGT-rs699 (χ2 = 4.85, p = 0.027, OR = 1.56, CI 95%: 1.05–2.33) were significantly associated with the non-ESRD group. However, for the ESRD group, the T allele was significantly higher than that in the controls (χ2 = 24.97, p < 0.001, odds ratio (OR) = 4.35, CI 95%: 2.36–8.02). Moreover, AGT (rs699) genotypes showed no significant difference between the ESRD group and controls. In conclusion, AGT gene polymorphisms rs699 and rs4762 were associated with non-ESRD versus controls, without any significant risk observed in all patient groups. However, the AGT (rs4762) variant showed a significant risk in the ESRD group in comparison to controls in Egyptians

Impact of Starch Coating Embedded with Silver Nanoparticles on Strawberry Storage Time

The strawberry has a very short postharvest life due to its fast softening and decomposition. The goal of this research is to see how well a starch-silver nanoparticle (St-AgNPs) coating affects the physical, chemical, and microbiological qualities of strawberries during postharvest life. Additionally, the effect of washing with running water on silver concentration in coated strawberry fruit was studied by an inductively coupled plasma-optical emission spectrometer (ICP-OES). Furthermore, the shelf-life period was calculated in relation to the temperature of storage. Fourier transform infrared-attenuated total reflectance (FTIR-ATR), UV-Visible, and Transmission Electron Microscopic (TEM) were used to investigate the structure of starch-silver materials, the size and shape of AgNPs, respectively. The AgNPs were spherical, with an average size range of 12.7 nm. The coated samples had the lowest weight loss, decay, and microbial counts as compared to the uncoated sample. They had higher total acidity and anthocyanin contents as well. The washing process led to the almost complete removal of silver particles by rates ranging from 98.86 to 99.10%. Finally, the coating maintained strawberry qualities and lengthened their shelf-life from 2 to 6 days at room storage and from 8 to 16 days in cold storage

Adsorption of Magenta Dye on PbO Doped MgZnO: Interpretation of Statistical Physics Parameters Using Double-Layer Models

This article reports the synthesis of PbO doped MgZnO (PbO@MgZnO) by a co-precipitation method, followed by an ultrasonication process. PbO@MgZnO demonstrates a significant adsorption capability toward Magenta Dye (MD). The greatest adsorption capability was optimized by varying parameters such as pH, MD concentration, and adsorbent dose. The kinetics study illustrates that the adsorption of MD on PbO@MgZnO follows the pseudo-second-order. The isotherm study revealed that Langmuir is best fitted for the adsorption, but with little difference in the R2 value of Langmuir and Freundlich, the adsorption process cloud be single or multi-layer. The maximum adsorption capacity was found to be 333.33 mg/g. The negative ΔG refers to the spontaneity of MD adsorption on PbO@MgZnO. The steric parameters from statistical physics models also favor the multi-layer adsorption mechanism. As a function of solution temperature, the parameter n pattern has values of n = 0.395, 0.290, and 0.280 for 298, 308, and 318 K, respectively (i.e., all values were below 1). Therefore, horizontal molecule positioning and multiple locking mechanisms were implicated during interactions between MD and PbO@MgZnO active sites

Non-Covalent Functionalization of Graphene Oxide-Supported 2-Picolyamine-Based Zinc(II) Complexes as Novel Electrocatalysts for Hydrogen Production

Three mononuclear 2-picolylamine-containing zinc(III) complexes viz [(2-PA)2ZnCl]2(ZnCl4)] (Zn1), [(2-PA)2Zn(H2O)](NO3)2] (Zn2) and [Zn(2-PA)2(OH)]NO3] (Zn3) were synthesized and fully characterized. Spectral and X-ray structural characteristics showed that the Zn1 complex has a square-pyramidal coordination environment around a zinc(II) core. The hydroxide complex Zn3 was non-covalently functionalized with few layers of graphene oxide (GO) sheets, formed by exfoliation of GO in water. The resulting Zn3/GO hybrid material was characterized by FT-IR, TGA-DSC, SEM-EDX and X-ray powder diffraction. The way of interaction of Zn3 with GO has been established through density functional theory (DFT) calculations. Both experimental and theoretical findings indicate that, on the surface of GO, the complex Zn3 forms a complete double-sided adsorption layer. Zn3 and its hybrid form Zn3/GO have been individually investigated as electrocatalysts for the hydrogen evolution reaction. The hybrid heterogenized form Zn3/GO was supported on glassy carbon (GC) with variable loading densities of Zn3 (0.2, 0.4 and 0.8 mg cm−2) to form electrodes. These electrodes have been tested as molecular electrocatalysts for the hydrogen evolution reaction (HER) using linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) in 0.1 M KOH. Results showed that both GC-Zn3 and GC-Zn3/GO catalysts for the HER are highly active, and with increase of the catalyst’s loading density, this catalytic activity enhances. The high catalytic activity of HER with a low onset potential of −140 mV vs. RHE and a high exchange current density of 0.22 mA cm−2 is achieved with the highest loading density of Zn3 (0.8 mg cm−2). To achieve a current density of 10 mA cm−2, an overpotential of 240 mV was needed

Electrochemical, theoretical and surface physicochemical studies of the alkaline copper corrosion inhibition by newly synthesized molecular complexes of benzenediamine and -tetraamine with π acceptor

International audienceTwo charge transfer complexes, namely [(BDAH)(+)(PA(-))] CT1 [(BTAH)(2+) (PA(-))(2)] and CT2 (BDAH = 1,2-benzenediamine, BTAH = 1,2,4,5-benzenetetramine, and PA(-) = 2,4,6-trinitrophenolate), were synthesized and fully characterized using various spectroscopic techniques. CT1 and CT2 were tested as inhibitors to effectively control the uniform and anodic corrosion processes of copper in an alkaline electrolyte (1.0 M KOH) using various electrochemical techniques. As a reference point, results were compared with the potassium salt of the pi-acceptor potassium 2,4,6-trinitrophenolate (designated here as PA(-)K(+)). The highest inhibition efficiency (97%) was recorded for inhibitor CT2 at a concentration of 1.0 mM. The inhibition mechanism was discussed based on scanning electron microscopy and X-ray photoelectron spectroscopy results of the corroded and inhibited Cu surfaces. A theoretical study, based on quantum-chemical calculations of the synthesized compounds. performed by the DFF/B3LYP method with a 6-311++G(2d,2p) basis set by using Gaussian 09, Revision A.02 program, was also included to support experimental findings. The various quantum chemical parameters such as E-HOMO, E-LUMO, chemical hardness, and chemical softness of the investigated molecules were calculated, and their correlation with the inhibition efficiency of the synthesized compounds was discussed. (C) 2020 Elsevier B.V. All rights reserved

Integrated approach in treatment of solid olive residue and olive wastewater

Generally olive oil generated two forms of waste by-products: solid olive residue (SOR) and olive wastewater (OWW). In the present study a promising solution is given to treat both SOR and OWW waste by-products. The first process consists of converting the solid olive residue to activated carbon using pyrolysis process at 600 °C, followed by steam activation procedure at three different temperatures. The attained activated carbon was examined by different experimental techniques such as FTIR, SEM, BET and iodine number. The surface area was increased by increasing stream activation temperature (reach 1020 m ^2 g ^−1 BET). However, the steam activation at 700 °C was found to be ideal for environmental and economic performance. On the other hand, the activated carbon at 700 °C displayed high removal capacity of both polyphenolic compounds and COD from olive wastewater. In fact, after 2 h of treatment, 95.5% of COD and 84.2% of polyphenolic compounds were completely removed