96 research outputs found
Evaluation complexity for nonlinear constrained optimization using unscaled kkt conditions and high-order models
FAPESP - FUNDAĂĂO DE AMPARO Ă PESQUISA DO ESTADO DE SĂO PAULOCNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTĂFICO E TECNOLĂGICOThe evaluation complexity of general nonlinear, possibly nonconvex, constrained optimization is analyzed. It is shown that, under suitable smoothness conditions, an epsilon-approximate first-order critical point of the problem can be computed in order O(epsilon(1-2(p+1)/p)) evaluations of the problem's functions and their first p derivatives. This is achieved by using a two-phase algorithm inspired by Cartis, Gould, and Toint [SIAM J. Optim., 21 (2011), pp. 1721-1739; SIAM J. Optim., 23 (2013), pp. 1553-1574]. It is also shown that strong guarantees (in terms of handling degeneracies) on the possible limit points of the sequence of iterates generated by this algorithm can be obtained at the cost of increased complexity. At variance with previous results, the epsilon-approximate first-order criticality is defined by satisfying a version of the KKT conditions with an accuracy that does not depend on the size of the Lagrange multipliers.The evaluation complexity of general nonlinear, possibly nonconvex, constrained optimization is analyzed. It is shown that, under suitable smoothness conditions, an epsilon-approximate first-order critical point of the problem can be computed in order O(epsilon(1-2(p+1)/p)) evaluations of the problem's functions and their first p derivatives. This is achieved by using a two-phase algorithm inspired by Cartis, Gould, and Toint [SIAM J. Optim., 21 (2011), pp. 1721-1739; SIAM J. Optim., 23 (2013), pp. 1553-1574]. It is also shown that strong guarantees (in terms of handling degeneracies) on the possible limit points of the sequence of iterates generated by this algorithm can be obtained at the cost of increased complexity. At variance with previous results, the epsilon-approximate first-order criticality is defined by satisfying a version of the KKT conditions with an accuracy that does not depend on the size of the Lagrange multipliers.262951967FAPESP - FUNDAĂĂO DE AMPARO Ă PESQUISA DO ESTADO DE SĂO PAULOCNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTĂFICO E TECNOLĂGICOFAPESP - FUNDAĂĂO DE AMPARO Ă PESQUISA DO ESTADO DE SĂO PAULOCNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTĂFICO E TECNOLĂGICO2010/10133-0; 2013/03447-6; 2013/05475-7; 2013/07375-0; 2013/23494-9304032/2010-7; 309517/2014-1; 303750/2014-6; 490326/2013-
Active flow control systems architectures for civil transport aircraft
Copyright @ 2010 American Institute of Aeronautics and AstronauticsThis paper considers the effect of choice of actuator technology and associated power systems architecture on the mass cost and power consumption of implementing active flow control systems on civil transport aircraft. The research method is based on the use of a mass model that includes a mass due to systems hardware and a mass due to the system energy usage. An Airbus A320 aircraft wing is used as a case-study application. The mass model parameters are based on first-principle physical analysis of electric and pneumatic power systems combined with empirical data on system hardware from existing equipment suppliers. Flow control methods include direct fluidic, electromechanical-fluidic, and electrofluidic actuator technologies. The mass cost of electrical power distribution is shown to be considerably less than that for pneumatic systems; however, this advantage is reduced by the requirement for relatively heavy electrical power management and conversion systems. A tradeoff exists between system power efficiency and the system hardware mass required to achieve this efficiency. For short-duration operation the flow control solution is driven toward lighter but less power-efficient systems, whereas for long-duration operation there is benefit in considering heavier but more efficient systems. It is estimated that a practical electromechanical-fluidic system for flow separation control may have a mass up to 40% of the slat mass for a leading-edge application and 5% of flap mass for a trailing-edge application.This work is funded by the Sixth European Union Framework Programme as part of the AVERT project (Contract No. AST5-CT-2006-030914
Direct observation of a Fermi surface and superconducting gap in LuNi2B2C
We measured the Fermi surface (FS), band dispersion and superconducting gap
in LuNi2B2C using Angle Resolved Photoemission Spectroscopy. Experimental data
were compared with the tight-binding version of the Linear Muffin-Tin Orbital
(LMTO) method and Linearized Augmented Plane-Wave (LAPW) calculations. We found
reasonable agreement between the two calculations and experimental data. The
measured FS exhibits large parallel regions with a nesting vector that agrees
with a previous positron annihilation study and calculations of the generalized
susceptibility. The measured dispersion curves also agree reasonably well with
the TB-LMTO calculations, albeit with some differences in the strength of the
hybridization. In addition, the spectrum in the superconducting state revealed
a 2meV superconducting gap. The data also clearly shows the presence of a
coherent peak above the chemical potential, that originates from thermally
excited electrons above the energy of 2 delta. This feature was not previously
observed in the Lu-based material.Comment: 5 pages, 3 figure
Cranberry A-type proanthocyanidins selectively target acute myeloid leukemia cells
Most elderly patients affected with acute myeloid leukemia (AML) will relapse and die of their disease even after achieving complete remission, thus emphasizing the urgent need for new therapeutic approaches with minimum toxicity to normal hematopoietic cells. Cranberry (Vaccinium spp.) extracts have exhibited anticancer and chemopreventive properties that have been mostly attributed to A-type proanthocyanidin (A-PAC) compounds. A-PACs, isolated from a commercially available cranberry extract, were evaluated for their effects on leukemia cell lines, primary AML samples, and normal CD34+ cord blood specimens. Our results indicated potent and specific antileukemia activity in vitro. In addition, the antileukemia activity of A-PACs extended to malignant progenitor and stem cell populations, sparing their normal counterparts. The antileukemia effects of A-PACs were also observed in vivo using patient derived xenografts. Surprisingly, we found that the mechanism of cell death was driven by activation of NF-ÎșB. Overall, our data suggest that A-PACs could be used to improve treatments for AML by targeting leukemia stem cells through a potentially novel pathway
Therapeutic Hemoglobin Levels after Gene Transfer in ÎČ-Thalassemia Mice and in Hematopoietic Cells of ÎČ-Thalassemia and Sickle Cells Disease Patients
Preclinical and clinical studies demonstrate the feasibility of treating ÎČ-thalassemia and Sickle Cell Disease (SCD) by lentiviral-mediated transfer of the human ÎČ-globin gene. However, previous studies have not addressed whether the ability of lentiviral vectors to increase hemoglobin synthesis might vary in different patients
Body iron metabolism and pathophysiology of iron overload
Iron is an essential metal for the body, while excess iron accumulation causes organ dysfunction through the production of reactive oxygen species. There is a sophisticated balance of body iron metabolism of storage and transport, which is regulated by several factors including the newly identified peptide hepcidin. As there is no passive excretory mechanism of iron, iron is easily accumulated when exogenous iron is loaded by hereditary factors, repeated transfusions, and other diseased conditions. The free irons, non-transferrin-bound iron, and labile plasma iron in the circulation, and the labile iron pool within the cells, are responsible for iron toxicity. The characteristic features of advanced iron overload are failure of vital organs such as liver and heart in addition to endocrine dysfunctions. For the estimation of body iron, there are direct and indirect methods available. Serum ferritin is the most convenient and widely available modality, even though its specificity is sometimes problematic. Recently, new physical detection methods using magnetic resonance imaging and superconducting quantum interference devices have become available to estimate iron concentration in liver and myocardium. The widely used application of iron chelators with high compliance will resolve the problems of organ dysfunction by excess iron and improve patient outcomes
Recommended from our members
The European Solar Telescope
The European Solar Telescope (EST) is a project aimed at studying the magnetic connectivity of the solar atmosphere, from the deep photosphere to the upper chromosphere. Its design combines the knowledge and expertise gathered by the European solar physics community during the construction and operation of state-of-the-art solar telescopes operating in visible and near-infrared wavelengths: the Swedish 1m Solar Telescope, the German Vacuum Tower Telescope and GREGOR, the French TĂ©lescope HĂ©liographique pour l'Ătude du MagnĂ©tisme et des InstabilitĂ©s Solaires, and the Dutch Open Telescope. With its 4.2 m primary mirror and an open configuration, EST will become the most powerful European ground-based facility to study the Sun in the coming decades in the visible and near-infrared bands. EST uses the most innovative technological advances: the first adaptive secondary mirror ever used in a solar telescope, a complex multi-conjugate adaptive optics with deformable mirrors that form part of the optical design in a natural way, a polarimetrically compensated telescope design that eliminates the complex temporal variation and wavelength dependence of the telescope Mueller matrix, and an instrument suite containing several (etalon-based) tunable imaging spectropolarimeters and several integral field unit spectropolarimeters. This publication summarises some fundamental science questions that can be addressed with the telescope, together with a complete description of its major subsystems
On-demand erythrocyte disposal and iron recycling requires transient macrophages in the liver
Iron is an essential component of the erythrocyte protein hemoglobin and is crucial to oxygen transport in vertebrates. In the steady state, erythrocyte production is in equilibrium with erythrocyte removal1. In various pathophysiological conditions, however, erythrocyte life span is severely compromised, which threatens the organism with anemia and iron toxicity2,3. Here we identify an on-demand mechanism that clears erythrocytes and recycles iron. We show that Ly-6Chigh monocytes ingest stressed and senescent erythrocytes, accumulate in the liver via coordinated chemotactic cues, and differentiate to ferroportin 1 (FPN1)-expressing macrophages that can deliver iron to hepatocytes. Monocyte-derived FPN1+ Tim-4neg macrophages are transient, reside alongside embryonically-derived Tim-4high Kupffer cells, and depend on Csf1 and Nrf2. The spleen likewise recruits iron-loaded Ly-6Chigh monocytes, but these do not differentiate into iron-recycling macrophages due to the suppressive action of Csf2. Inhibiting monocyte recruitment to the liver leads to kidney and liver damage. These observations identify the liver as the primary organ supporting rapid erythrocyte removal and iron recycling and uncover a mechanism by which the body adapts to fluctuations in erythrocyte integrity
A combined approach for ÎČ-thalassemia based on gene therapy-mediated adult hemoglobin (HbA) production and fetal hemoglobin (HbF) induction
- âŠ