15,063 research outputs found
Recommended from our members
Shock wave boundary layer interaction studied by high-speed schlieren
Shock wave boundary layer interactions at compression ramps have been examined by high-speed schlieren. A total of six ramps with angles ranging from 20 deg to 30 deg, the ramp angle effect on the SWBLI is thus studied. The present high-speed schlieren with a frame rate of 20 kHz generates a large ensemble of 9000 images, which secures the convergence of the statistics of the schlieren intensity. The rms of the schlieren intensity is of great interest, as it enables visualisation of the flow features that are not observable in the raw schlieren images, such as the corner separation/low momentum region, the spot of strong flow unsteadiness right after the shock wave and the location of the peak fluctuation over the ramp. Through the present systematic experimental investigation of SWBLI, the highspeed schlieren is demonstrated to be of great capability for SWBLI study
FFT-LB modeling of thermal liquid-vapor systems
We further develop a thermal LB model for multiphase flows. In the improved
model, we propose to use the FFT scheme to calculate both the convection term
and external force term. The usage of FFT scheme is detailed and analyzed. By
using the FFT algorithm spatiotemporal discretization errors are decreased
dramatically and the conservation of total energy is much better preserved. A
direct consequence of the improvement is that the unphysical spurious
velocities at the interfacial regions can be damped to neglectable scale.
Together with the better conservation of total energy, the more accurate flow
velocities lead to the more accurate temperature field which determines the
dynamical and final states of the system. With the new model, the phase diagram
of the liquid-vapor system obtained from simulation is more consistent with
that from theoretical calculation. Very sharp interfaces can be achieved. The
accuracy of simulation results are also verified by the Laplace law. The FFT
scheme can be easily applied to other models for multiphase flows.Comment: 34 pages, 21 figure
Experimental investigation of the properties of electrospun nanofibers for potential medical application
Copyright © 2015 Anhui Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.Polymer based nanofibers using ethylene-co-vinyl alcohol (EVOH) were fabricated by electrospinning technology. The nanofibers were studied for potential use as dressing materials for skin wounds treatment. Properties closely related to the clinical requirements for wound dressing were investigated, including the fluid uptake ability (FUA), the water vapour transmission rate (WVTR), the bacteria control ability of nanofibers encapsulated with different antibacterial drugs, and Ag of various concentrations. Nanofibre degradation under different environmental conditions was also studied for the prospect of long term usage. The finding confirms the potential of EVOH nanofibers for wound dressing application, including the superior performance compared to cotton gauze and the strong germ killing capacity when Ag particles are present in the nanofibers
Morphological evolution of a 3D CME cloud reconstructed from three viewpoints
The propagation properties of coronal mass ejections (CMEs) are crucial to
predict its geomagnetic effect. A newly developed three dimensional (3D) mask
fitting reconstruction method using coronagraph images from three viewpoints
has been described and applied to the CME ejected on August 7, 2010. The CME's
3D localisation, real shape and morphological evolution are presented. Due to
its interaction with the ambient solar wind, the morphology of this CME changed
significantly in the early phase of evolution. Two hours after its initiation,
it was expanding almost self-similarly. CME's 3D localisation is quite helpful
to link remote sensing observations to in situ measurements. The investigated
CME was propagating to Venus with its flank just touching STEREO B. Its
corresponding ICME in the interplanetary space shows a possible signature of a
magnetic cloud with a preceding shock in VEX observations, while from STEREO B
only a shock is observed. We have calculated three principle axes for the
reconstructed 3D CME cloud. The orientation of the major axis is in general
consistent with the orientation of a filament (polarity inversion line)
observed by SDO/AIA and SDO/HMI. The flux rope axis derived by the MVA analysis
from VEX indicates a radial-directed axis orientation. It might be that locally
only the leg of the flux rope passed through VEX. The height and speed profiles
from the Sun to Venus are obtained. We find that the CME speed possibly had
been adjusted to the speed of the ambient solar wind flow after leaving COR2
field of view and before arriving Venus. A southward deflection of the CME from
the source region is found from the trajectory of the CME geometric center. We
attribute it to the influence of the coronal hole where the fast solar wind
emanated from.Comment: ApJ, accepte
Coexistence of superconductivity and antiferromagnetism in self-doped bilayer t-t'-J model
A self-doped bilayer t-t'-J model of an electron- and a hole-doped planes is
studied by the slave-boson mean-field theory. A hopping integral between the
differently doped planes, which are generated by a site potential, are
renormalized by the electron-electron correlation. We find coexistent phases of
antiferromagnetic (AFM) and superconducting orders, although the magnitudes of
order parameters become more dissimilar in the bilayer away from half-filling.
Fermi surfaces (FS's) with the AFM order show two pockets around the nodal and
the anti-nodal regions. These results look like a composite of electron- and
hole-doped FS's. In the nodal direction, the FS splitting is absent even in the
bilayer system, since one band is flat due to the AFM order.Comment: 6 pages, 4 figure
Semileptonic Meson Decays Into A Highly Excited Charmed Meson Doublet
We study the heavy quark effective theory prediction for semileptonic
decays into an orbital excited -wave charmed doublet, the (, )
states (, ), at the leading order of heavy quark expansion.
The corresponding universal form factor is estimated by using the QCD sum rule
method. The decay rates we predict are and . The branching ratios are
and
, respectively.Comment: 6 pages,2 figure
Interlayer couplings and the coexistence of antiferromagnetic and d-wave pairing order in multilayer cuprates
A more extended low density region of coexisting uniform antiferromagnetism
and d-wave superconductivity has been reported in multilayer cuprates, when
compared to single or bilayer cuprates. This coexistence could be due to the
enhanced screening of random potential modulations in inner layers or to the
interlayer Heisenberg and Josephson couplings. A theoretical analysis using a
renormalized mean field theory, favors the former explanation. The potential
for an improved determination of the antiferromagnetic and superconducting
order parameters in an ideal single layer from zero field NMR and infrared
Josephson plasma resonances in multilayer cuprates is discussed.Comment: 6 pages, 2 figure
- …