16,261 research outputs found

    Vortex melting and decoupling transitions in YBa2_{2}Cu4_{4}O8_{8} single crystals

    Full text link
    The vortex correlation along the c-axis in high quality single crystals of YBa2_{2}Cu4_{4}O8_{8} has been investigated as a function of temperature T in different magnetic fields, using the quasi-flux transformer configuration. A simultaneous sharp drop associated with the vortex lattice melting is observed in both the primary and secondary voltages(Vtop_{top} and Vbot_{bot}). Just above the melting temperature, the vortices form three-dimensional line liquid with the correlation length along the c direction Lc≤L_{c}\leq t, the sample thickness. The temperature where a resistive peak in Rbot_{bot} develops corresponds to the decoupling temperature Td_{d} at which the vortices loose their correlation along the c-direction and they dissolve into the two dimensional pancake vortices. The H-T phase diagram for the YBa2_{2}Cu4_{4}O8_{8} single crystal is obtained.Comment: 1 Text file, 3 eps figure

    Hard X-ray and UV Observations of the 2005 January 15 Two-ribbon Flare

    Full text link
    In this paper, we present comprehensive analysis of a two-ribbon flare observed in UV 1600{\AA} by Transition Region and Coronal Explorer and in HXRs by Reuven Ramaty High Energy Solar Spectroscopic Imager. HXR (25-100 keV) imaging observations show two kernels of size (FWHM) 15?? moving along the two UV ribbons. We find the following results. (1) UV brightening is substantially enhanced wherever and whenever the compact HXR kernel is passing, and during the HXR transit across a certain region, the UV count light curve in that region is temporally correlated with the HXR total flux light curve. After the passage of the HXR kernel, the UV light curve exhibits smooth monotonical decay. (2)We measure the apparent motion speed of the HXR sources and UV ribbon fronts, and decompose the motion into parallel and perpendicular motions with respect to the magnetic polarity inversion line (PIL). It is found that HXR kernels and UV fronts exhibit similar apparent motion patterns and speeds. The parallel motion dominates during the rise of the HXR emission, and the perpendicular motion starts and dominates at the HXR peak, the apparent motion speed being 10-40 km s-1. (3) We also find that UV emission is characterized by a rapid rise correlated with HXRs, followed by a long decay on timescales of 15-30 minutes. The above analysis provides evidence that UV brightening is primarily caused by beam heating, which also produces thick-target HXR emission. The thermal origin of UV emission cannot be excluded, but would produce weaker heating by one order of magnitude. The extended UV ribbons in this event are most likely a result of sequential reconnection along the PIL, which produces individual flux tubes (post-flare loops), subsequent non-thermal energy release and heating in these flux tubes, and then the very long cooling time of the transition region at the feet of these flux tubes.Comment: 8 figure

    Solar flare hard X-ray spikes observed by RHESSI: a case study

    Full text link
    In this paper, we analyze hard X-ray spikes observed by RHESSI to understand their temporal, spectral, and spatial properties. A recently developed demodulation code was applied to hard X-ray light curves in several energy bands observed by RHESSI. Hard X-ray spikes were selected from the demodulated flare light curves. We measured the spike duration, the energy-dependent time delay, and count spectral index of these spikes. We also located the hard X-ray source emitting these spikes from RHESSI mapping that was coordinated with imaging observations in visible and UV wavelengths. We identify quickly varying structures of <1 s during the rise of hard X-rays in five flares. These hard X-ray spikes can be observed at photon energies over 100 keV. They exhibit sharp rise and decay with a duration (FWHM) of less than 1 s. Energy-dependent time lags are present in some spikes. It is seen that the spikes exhibit harder spectra than underlying components, typically by 0.5 in the spectral index when they are fitted to power-law distributions. RHESSI clean maps at 25-100 keV with an integration of 2 s centered on the peak of the spikes suggest that hard X-ray spikes are primarily emitted by double foot-point sources in magnetic fields of opposite polarities. With the RHESSI mapping resolution of ~ 4 arsec, the hard X-ray spike maps do not exhibit detectable difference in the spatial structure from sources emitting underlying components. Coordinated high-resolution imaging UV and infrared observations confirm that hard X-ray spikes are produced in magnetic structures embedded in the same magnetic environment of the underlying components. The coordinated high-cadence TRACE UV observations of one event possibly reveal new structures on spatial scales <1-2 arsec at the time of the spike superposed on the underlying component. They are probably sources of hard X-ray spikes.Comment: 20 pages, 11 figure

    Tracking intracavernously injected adipose-derived stem cells to bone marrow.

    Get PDF
    The intracavernous (i.c.) injection of stem cells (SCs) has been shown to improve erectile function in various erectile dysfunction (ED) animal models. However, the tissue distribution of the injected cells remains unknown. In this study we tracked i.c.-injected adipose-derived stem cells (ADSCs) in various tissues. Rat paratesticular fat was processed for ADSC isolation and culture. The animals were then subject to cavernous nerve (CN) crush injury or sham operation, followed by i.c. injection of 1 million autologous or allogeneic ADSCs that were labeled with 5-ethynyl-2-deoxyuridine (EdU). Another group of rats received i.c. injection of EdU-labeled allogeneic penile smooth muscle cells (PSMCs). At 2 and 7 days post injection, penises and femoral bone marrow were processed for histological analyses. Whole femoral bone marrows were also analyzed for EdU-positive cells by flow cytometry. The results show that ADSCs exited the penis within days of i.c. injection and migrated preferentially to bone marrow. Allogenicity did not affect the bone marrow appearance of ADSCs at either 2 or 7 days, whereas CN injury reduced the number of ADSCs in bone marrow significantly at 7 but not 2 days. The significance of these results in relation to SC therapy for ED is discussed

    A time domain decentralized algorithm for two channel active noise control.

    Full text link
    Due to their low computational complexity, reduced wiring cost, and flexibility of scaling up, decentralized multiple channel active control systems are attractive in many applications. In a decentralized multiple channel active control system, a number of small subsystems are constructed, which are updated independently with only the associated error signals. In this letter, a time domain two channel decentralized control algorithm is proposed to achieve the similar noise reduction performance as the centralized one. Auxiliary filters are introduced to filter the reference signal for control filter update and a unique design method is proposed to shape the frequency response of the auxiliary filters. The simulation results using the measured impulse responses demonstrate the efficacy of the proposed algorithm for broadband noise control

    Magnetic and Transport Properties in CoSr2Y1−xCaxCu2O7CoSr_2Y_{1-x}Ca_xCu_2O_7 (xx=0∼\sim0.4)

    Full text link
    Magnetic and transport properties of CoSr2Y1−xCaxCu2O7Co Sr_2 Y_{1-x} Ca_x Cu_2 O_7 (x=0∼0.4x=0 \sim 0.4) system have been investigated. A broad maximum in M(T) curve, indicative of low-dimensional antiferromagnetic ordering originated from CoO1+δCoO_{1+\delta} layers, is observed in Ca-free sample. With increasing Ca doping level up to 0.2, the M(T) curve remains almost unchanged, while resistivity is reduced by three orders. Higher Ca doping level leads to a drastic change of magnetic properties. In comparison with the samples with x=0.0∼0.2x=0.0 \sim 0.2, the temperature corresponding to the maximum of M(T) is much lowered for the sample xx=0.3. The sample xx=0.4 shows a small kink instead of a broad maximum and a weak ferromagnetic feature. The electrical transport behavior is found to be closely related to magnetic properties for the sample xx=0.2, 0.25, 0.3, 0.4. It suggests that CoO1+δCoO_{1+\delta} layers are involved in charge transport in addition to conducting CuO2CuO_2 planes to interpret the correlation between magnetism and charge transport. X-ray photoelectron spectroscopy studies give an additional evidence of the the transfer of the holes into the CoO1+δCoO_{1+\delta} charge reservoir
    • …
    corecore