Remote measurement of salinity: Repeated measurements over a single flight line near the Mississippi Sound

Experiments to remotely determine sea water salinity from measurements of the sea surface radiometric temperature over the Mississippi Sound were conducted. The line was flown six times at an altitude of 244 meters. The radiometric temperature of the sea surface was measured in two spectral intervals. The specifications of the equipment and the conditions under which the tests were conducted are described. Results of the tests are presented in the form of graphs

Remote sensing of salinity

The complex dielectric constant of sea water is a function of salinity at 21 cm wavelength, and sea water salinity can be determined by a measurement of emissivity at 21 cm along with a measurement of thermodynamic temperature. Three aircraft and one helicopter experiments using two different 21 cm radiometers were conducted under different salinity and temperature conditions. Single or multiple ground truth measurements were used to calibrate the data in each experiment. It is inferred from these experiments that accuracies of 1 to 2%/OO are possible with a single surface calibration point necessary only every two hours if the following conditions are met--water temperatures above 20 C, salinities above 10%/OO, and level plane flight. More frequent calibration, constraint of the aircraft's orientation to the same as it was during calibration, and two point calibration (at a high and low salinity level) rather than single point calibration may give even better accuracies in some instances

An experimental study of intermodulation effects in an atomic fountain frequency standard

The short-term stability of passive atomic frequency standards, especially in pulsed operation, is often limited by local oscillator noise via intermodulation effects. We present an experimental demonstration of the intermodulation effect on the frequency stability of a continuous atomic fountain clock where, under normal operating conditions, it is usually too small to observe. To achieve this, we deliberately degrade the phase stability of the microwave field interrogating the clock transition. We measure the frequency stability of the locked, commercial-grade local oscillator, for two modulation schemes of the microwave field: square-wave phase modulation and square-wave frequency modulation. We observe a degradation of the stability whose dependence with the modulation frequency reproduces the theoretical predictions for the intermodulation effect. In particular no observable degradation occurs when this frequency equals the Ramsey linewidth. Additionally we show that, without added phase noise, the frequency instability presently equal to 2x10-13 at 1s, is limited by atomic shot-noise and therefore could be reduced were the atomic flux increased

Testing of a technique for remotely measuring water salinity in an estuarine environment

An aircraft experiment was flown on November 7, 1973 to test a technique for remote water salinity measurement. Apparent temperatures at 21 cm and 8-14 micron wavelengths were recorded on eight runs over a line along which the salinity varied from 5 to 30%. Boat measurements were used for calibration and accuracy calculations. Overall RMS accuracy over the complete range of salinities was 3.6%. Overall RMS accuracy for salinities greater than 10%, where the technique is more sensitive, was 2.6%. Much of this error is believed to be due to inability to exactly locate boat and aircraft positions. The standard deviation over the eight runs for salinities or = 10% is 1.4%; this error contains a component due to mislocation of the aircraft also. It is believed that operational use of the technique is possible with accuracies of 1-2%

Economic evaluation of the eradication program for bovine viral diarrhea in the Swiss dairy sector

The aim of this study was to conduct an economic evaluation of the BVD eradication program in the Swiss dairy sector. The situation before the start of the program (herd-level prevalence: 20%) served as a baseline scenario. Production models for three dairy farm types were used to estimate gross margins as well as net production losses and expenditures caused by BVD. The total economic benefit was estimated as the difference in disease costs between the baseline scenario and the implemented eradication program and was compared to the total eradication costs in a benefit-cost analysis. Data on the impact of BVD virus (BVDV) infection on animal health, fertility and production parameters were obtained empirically in a retrospective epidemiological case-control study in Swiss dairy herds and complemented by literature. Economic and additional production parameters were based on benchmarking data and published agricultural statistics. The eradication costs comprised the cumulative expenses for sampling and diagnostics. The economic model consisted of a stochastic simulation in @Risk for Excel with 20,000 iterations and was conducted for a time period of 14 years (2008–2021)

An all speed second order well-balanced IMEX relaxation scheme for the Euler equations with gravity

We present an implicit-explicit well-balanced finite volume scheme for the Euler equations with a gravitational source term which is able to deal also with low Mach flows. To visualize the different scales we use the non-dimensionalized equations on which we apply a pressure splitting and a Suliciu relaxation. On the resulting model, we apply a splitting of the flux into a linear implicit and an non-linear explicit part that leads to a scale independent time-step. The explicit step consists of a Godunov type method based on an approximative Riemann solver where the source term is included in the flux formulation. We develop the method for a first order scheme and give an extension to second order. Both schemes are designed to be well-balanced, preserve the positivity of density and internal energy and have a scale independent diffusion. We give the low Mach limit equations for well-prepared data and show that the scheme is asymptotic preserving. These properties are numerically validated by various test cases

Seismic Downhole, CPT, and DMT Correlations in Sand

Results from seismic cone penetration and dilatometer tests performed in a cohesionless soil are presented and compared with previously published correlations for estimating the elastic shear modulus. Poor correlations were obtained between the elastic shear modulus, the dilatometer modulus and the cone tip resistance; however, somewhat better estimates of the elastic shear modulus were obtained using the coefficient of lateral stress and total unit weight empirically determined from the dilatometer

Theoretical analysis of aliasing noises in cold atom Mach-Zehnder interferometers

We present a theoretical analysis of aliasing noises that might appear in cold atom Mach-Zehnder interferometers used for the measurement of various physical quantities. We focus more specifically on single cold atom gyroscopes. To evaluate the level of aliasing noises, we have developed a model based on the power spectral densities of the different identified noise sources as input parameters and which makes use of a servo-loop to realize a precise measurement of the rotation rate. The model allows one to take into account different modes of operation, like a continuous as well as a pulsed or even a multi-ball operation. For monokinetic atoms, we show that the intermodulation noise can be completely filtered out with a continuous mode of operation and an optimum modulation scheme for any modulation frequency but also with a pulsed operation however only for specific launching frequencies. In the case of a real continuous atomic beam having a velocity distribution, it comes out that a high attenuation can be reached which indicates clearly the potential stability improvement that can be expected from a continuous operatio