Coronal loop widths and pressure scale heights

The scale heights of stratification and the widths of steady solar coronal loops exhibit properties unexplained by standard theory: observed scale heights are often much greater than static theory predicts, while the nearly-constant widths of loop emission signatures defy theoretical expectations for large flux tubes in stratified media. In this work we relate the cross-sectional profile of a coronal flux tube to its density scale height in steady-state plasma flow regimes. Steady flows may shorten or lengthen the scale height according to how the tube cross-sectional area varies with arclength. In a near-potential corona the flux tubes are expected to be sufficiently expansive in many active regions for scale heights to be increased by steady flows. On the other hand, cases where scale lengths are actually increased to observed sizes form a small part of the solution space, close to regimes where density profiles reverse. Therefore, although steady flows are the only steady process known to be capable of extending scale heights significantly, they are not expected to be not responsible for the majority of extended active region scale heights

Engine Component Retirement-For-Cause: A Nondestructive Evaluation (NDE) and Fracture Mechanics Based Maintainance Concep

Historically, cyclic life limited gas turbine engine components have been retired when they reach an analytically determined life where the first fatigue crack per 1000 parts could be expected. By definition, 99.9% of these components are being retired prematurely as they have considerable useful life remaining. Retirement for Cause is a procedure which would allow safe utilization of the full life capacity of each individual component. Since gas turbine engine rotor components are prime candidates and are among the most costly of engine components, adoption of a RFC maintenance philosophy could result in substantial engine systems life cycle cost savings. Two major technical disciplines must be developed and integrated to realize those cost savings: Fracture Mechanics and Nondestructive Evaluation. This paper discusses the methodology, and development activity required, to integrate these disciplines to provide a viable RFC system for use on military gas turbine engines, and illustrates potential benefits of its application

The energetics of the gradual phase

Reseachers compare results with those in the chapter by Moore et al. (1980), who reached five main conclusions about the gradual phase: (1) the typical density of the soft X-ray emitting plasma is between 10 to the 11th power and 10 to the 12th power cm-3 for compact flares and between 10 to the 10th power and 10 to the 11th power cm-3 for a large-area flare; (2) cooling is by conduction and radiation in roughly equal proportions; (3) continual heating is needed in the decay phase of two-ribbon flares; (4) continual heating is probably not needed in compact events; (5) most of the soft-X-ray-emitting plasma results from chromospheric evaporation. The goal was to reexamine these problems with the data from the Solar Maximum Mission (SMM) and other supporting instruments as well as to take advantage of recent theoretical advances. SMM is capable of measuring coronal temperatures more accurately and with a better cadence than has been possible before. The SMM data set is also unique in that the complete transit of an active region was observed, with soft X-ray and UV images being taken every few minutes. Researcher's were therefore able to establish the pre-flare conditions of the region and see whether anything has changed as a result of the flare. The assumptions made in attempting to determine the required plasma parameters are described. The derived parameters for the five prime flares are presented, and the role of numerical simulations is discussed

The flaring and quiescent components of the solar corona

The solar corona is a template to understand stellar activity. The Sun is a moderately active star, and its corona differs from active stars: active stellar coronae have a double-peaked EM(T) with the hot peak at 8-20 MK, while the non flaring solar corona has one peak at 1-2 MK. We study the average contribution of flares to the solar EM(T) to investigate indirectly the hypothesis that the hot peak of the EM(T) of active stellar coronae is due to a large number of unresolved solar-like flares, and to infer properties on the flare distribution from nano- to macro-flares. We measure the disk-integrated time-averaged emission measure, EM_F(T), of an unbiased sample of solar flares analyzing uninterrupted GOES/XRS light curves over time intervals of one month. We obtain the EM_Q(T) of quiescent corona for the same time intervals from the Yohkoh/SXT data. To investigate how EM_F(T) and EM_Q(T) vary with the solar cycle, we evaluate them at different phases of the cycle (from Dec. 1991 to Apr. 1998). Irrespective of the solar cycle phase, EM_F(T) appears like a peak of the distribution significantly larger than the values of EM_Q(T) for T~5-10 MK. As a result the time-averaged EM(T) of the whole solar corona is double-peaked, with the hot peak, due to time-averaged flares, located at temperature similar of that of active stars, but less enhanced. The EM_F(T) shape supports the hypothesis that the hot EM(T) peak of active coronae is due to unresolved solar-like flares. If this is the case, quiescent and flare components should follow different scaling laws for increasing stellar activity. In the assumption that the heating of the corona is entirely due to flares, from nano- to macro-flares, then either the flare distribution or the confined plasma response to flares, or both, are bimodal.Comment: 8 pages, 7 postscript figures, accepted for publication in Astronomy and Astrophysic

Flare energetics

In this investigation of flare energetics, researchers sought to establish a comprehensive and self-consistent picture of the sources and transport of energy within a flare. To achieve this goal, they chose five flares in 1980 that were well observed with instruments on the Solar Maximum Mission, and with other space-borne and ground-based instruments. The events were chosen to represent various types of flares. Details of the observations available for them and the corresponding physical parameters derived from these data are presented. The flares were studied from two perspectives, the impulsive and gradual phases, and then the results were compared to obtain the overall picture of the energics of these flares. The role that modeling can play in estimating the total energy of a flare when the observationally determined parameters are used as the input to a numerical model is discussed. Finally, a critique of the current understanding of flare energetics and the methods used to determine various energetics terms is outlined, and possible future directions of research in this area are suggested

Signal generation mechanisms in scanning-electron acoustic microscopy of ionic crystals

MgO crystals have been studied by scanning‐electron acoustic microscopy under different experimental conditions. Contrast mechanisms in imaging are discussed and compared. The experimental results obtained by earthing or nonearthing the specimen‐transducer interface suggest the existence of a signal generation mechanism that is related to the ionic nature of these kind of crystals. Electron‐acoustic microscopy appears then to be a useful tool for the characterization of ionic materials

Coronal mass ejections as expanding force-free structures

We mode Solar coronal mass ejections (CMEs) as expanding force-fee magnetic structures and find the self-similar dynamics of configurations with spatially constant \alpha, where {\bf J} =\alpha {\bf B}, in spherical and cylindrical geometries, expanding spheromaks and expanding Lundquist fields correspondingly. The field structures remain force-free, under the conventional non-relativistic assumption that the dynamical effects of the inductive electric fields can be neglected. While keeping the internal magnetic field structure of the stationary solutions, expansion leads to complicated internal velocities and rotation, induced by inductive electric field. The structures depends only on overall radius R(t) and rate of expansion \dot{R}(t) measured at a given moment, and thus are applicable to arbitrary expansion laws. In case of cylindrical Lundquist fields, the flux conservation requires that both axial and radial expansion proceed with equal rates. In accordance with observations, the model predicts that the maximum magnetic field is reached before the spacecraft reaches the geometric center of a CME.Comment: 19 pages, 9 Figures, accepted by Solar Physic

Disorder-to-order transition in the magnetic and electronic properties of URh_2Ge_2

We present a study of annealing effects on the physical properties of tetragonal single--crystalline URh_2Ge_2. This system, which in as-grown form was recently established as the first metallic 3D random-bond heavy-fermion spin glass, is transformed by an annealing treatment into a long-range antiferromagnetically (AFM) ordered heavy-fermion compound. The transport properties, which in the as-grown material were dominated by the structural disorder, exhibit in the annealed material signs of typical metallic behavior along the crystallographic a axis. From our study URh_2Ge_2 emerges as exemplary material highlighting the role and relevance of structural disorder for the properties of strongly correlated electron systems. We discuss the link between the magnetic and electronic behavior and how they are affected by the structural disorder.Comment: Phys. Rev. B, in print (scheduled 1 Mar 2000

Critical Issues For Understanding Particle Acceleration in Impulsive Solar Flares

This paper, a review of the present status of existing models for particle acceleration during impulsive solar flares, was inspired by a week-long workshop held in the Fall of 1993 at NASA Goddard Space Flight Center. Recent observations from Yohkoh and the Compton Gamma Ray Observatory, and a reanalysis of older observations from the Solar Maximum Mission, have led to important new results concerning the location, timing, and efficiency of particle acceleration in flares. These are summarized in the first part of the review. Particle acceleration processes are then discussed, with;particular emphasis on new developments in stochastic acceleration by magnetohydrodynamic waves and direct electric field acceleration by both sub- and super-Dreicer electric fields. Finally, issues that arise when these mechanisms are incorporated into the large-scale flare structure are considered. Stochastic and super-Dreicer acceleration may occur either in a single large coronal reconnection site or at multiple \u27\u27fragmented\u27\u27 energy release sites. Sub-Dreicer acceleration requires a highly filamented coronal current pattern. A particular issue that needs to be confronted by all theories is the apparent need for large magnetic field strengths in the flare energy release region

Passive sampling methods for contaminated sediments: Risk assessment and management

This paper details how activity-based passive sampling methods (PSMs), which provide information on bioavailability in terms of freely dissolved contaminant concentrations (Cfree), can be used to better inform risk management decision making at multiple points in the process of assessing and managing contaminated sediment sites. PSMs can increase certainty in site investigation and management, because Cfree is a better predictor of bioavailability than total bulk sediment concentration (Ctotal) for 4 key endpoints included in conceptual site models (benthic organism toxicity, bioaccumulation, sediment flux, and water column exposures). The use of passive sampling devices (PSDs) presents challenges with respect to representative sampling for estimating average concentrations and other metrics relevant for exposure and risk assessment. These challenges can be addressed by designing studies that account for sources of variation associated with PSMs and considering appropriate spatial scales to meet study objectives. Possible applications of PSMs include: quantifying spatial and temporal trends in bioavailable contaminants, identifying and evaluating contaminant source contributions, calibrating site-specific models, and, improving weight-of-evidence based decision frameworks. PSM data can be used to assist in delineating sediment management zones based on likelihood of exposure effects, monitor remedy effectiveness, and, evaluate risk reduction after sediment treatment, disposal, or beneficial reuse after management actions. Examples are provided illustrating why PSMs and freely dissolved contaminant concentrations (Cfree) should be incorporated into contaminated sediment investigations and study designs to better focus on and understand contaminant bioavailability, more accurately estimate exposure to sediment-associated contaminants, and better inform risk management decisions. Research and communication needs for encouraging broader use are discussed. Integr Environ Assess Manag 2014;10:224–236. © 2014 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of SETAC