9,751 research outputs found
Induction probe determines levels of liquid metals
Mutual-inductance probe accurately measures liquid levels in a variety of liquid metals at elevated temperatures. It can be used in pyrochemical processes for the recovery of spent reactor fuel
Helicopter rotor loads using discretized matched asymptotic expansions
The numerical practicality of a matched asymptotic expansion approach for the computation of unsteady three dimensional airloads on a helicopter rotor was improved. This effort utilizes a discretized repesentation of the doublet strength distribution and helical streamlines to decrease the computational requirements of the original analysis. The continuous variation of the doublet strength was approximated by piecewise constant or piecewise quadratic distributions, and the helical trajectory of a fluid particle was approximated by connected straight line segments. As a direct result of these simplified representations the computational time required for the execution of a typical flight condition was reduced by an order of magnitude with respect to the requirements of the original analysis. Airloads which were computed using the discretized method for a two bladed model rotor and a full scale four bladed rotor are in close agreement with measured results and airloads from the original asymptotic analysis. For conditions characterized by significant rotor/wake interaction the piecewise constant representation requires a reduced azimuth spacing to maintain acceptable accuracy
Helicopter rotor loads using matched asymptotic expansions: User's manual
Computer programs were developed to implement the computational scheme arising from Van Holten's asymptotic method for calculating airloads on a helicopter rotor blade in forward flight, and a similar technique which is based on a discretized version of the method. The basic outlines of the two programs are presented, followed by separate descriptions of the input requirements and output format. Two examples illustrating job entry with appropriate input data and corresponding output are included. Appendices contain a sample table of lift coefficient data for the NACA 0012 air foil and listings of the two programs
Exploratory investigation of sound pressure level in the wake of an oscillating airfoil in the vicinity of stall
Wind tunnel tests were performed on two oscillating two-dimensional lifting surfaces. The first of these models had an NACA 0012 airfoil section while the second simulated the classical flat plate. Both of these models had a mean angle of attack of 12 degrees while being oscillated in pitch about their midchord with a double amplitude of 6 degrees. Wake surveys of sound pressure level were made over a frequency range from 16 to 32 Hz and at various free stream velocities up to 100 ft/sec. The sound pressure level spectrum indicated significant peaks in sound intensity at the oscillation frequency and its first harmonic near the wake of both models. From a comparison of these data with that of a sound level meter, it is concluded that most of the sound intensity is contained within these peaks and no appreciable peaks occur at higher harmonics. It is concluded that within the wake the sound intensity is largely pseudosound while at one chord length outside the wake, it is largely true vortex sound. For both the airfoil and flat plate the peaks appear to be more strongly dependent upon the airspeed than on the oscillation frequency. Therefore reduced frequency does not appear to be a significant parameter in the generation of wake sound intensity
Examining the importance of Aberdeenshire (UK) coastal waters for North Sea bottlenose dolphins (Tursiops truncates)
Using land- and vessel-based surveys, data on the relative abundance, distribution and habitat use of bottlenose dolphins (Tursiops truncatus) in Aberdeenshire waters were collected between 1999 and 2001. Bottlenose dolphins were present throughout the year, with peak abundance during the months of March to May. The occurrence of calves was seasonal, With the proportion of calves highest during the spring months. Foraging behaviour was recorded mainly in the vicinity of Aberdeen harbour. Dolphins photographed in Aberdeenshire waters were successfully matched and confirmed as Moray Firth animals. The results of the present study suggest that Moray Firth bottlenose dolphins utilize Aberdeenshire waters more frequently than previously reported. Aberdeen harbour is apparently an important feeding area, and Aberdeenshire waters are regularly used by another-calf pairs. This has important management implications since this area of coastline does not currently form part of the designated Special Area of Conservation (SAC) for this population
An Economic Evaluation of Precision Deep Tillage Practices through the Analysis of Comparative Enterprise Budgets
Precision deep tillage allows for lower use of tillage though recognized variation with in a field. Comparative enterprise budgets, breakeven, and sensitivity analysis were preformed to prove that under long-term no-till conditions precision deep tillage can be a profitable form of tillage that will enter an optimal producer strategy.Farm Management,
Recombinant factorVIII Fc fusion protein for the prevention and treatment of bleeding in children with severe hemophilia A
This work was supported
by funding from Biogen, including funding for the
editorial and writing support in the the development of
this paper
Sound propagation over uneven ground and irregular topography
The development of theoretical, computational, and experimental techniques for predicting the effects of irregular topography on long range sound propagation in the atmosphere is discussed. Irregular topography here is understood to imply a ground surface that (1) is not idealizable as being perfectly flat or (2) that is not idealizable as having a constant specific acoustic impedance. The study focuses on circumstances where the propagation is similar to what might be expected for noise from low-altitude air vehicles flying over suburban or rural terrain, such that rays from the source arrive at angles close to grazing incidence
Novel algorithms for 3D surface point cloud boundary detection and edge reconstruction
Tessellated surfaces generated from point clouds typically show inaccurate and jagged boundaries. This can lead to tolerance errors and problems such as machine judder if the model is used for ongoing manufacturing applications. This paper introduces a novel boundary point detection algorithm and spatial FFT-based filtering approach, which together allow for direct generation of low noise tessellated surfaces from point cloud data, which are not based on pre-defined threshold values. Existing detection techniques are optimized to detect points belonging to sharp edges and creases. The new algorithm is targeted at the detection of boundary points and it is able to do this better than the existing methods. The FFT-based edge reconstruction eliminates the problem of defining a specific polynomial function order for optimum polynomial curve fitting. The algorithms were tested to analyse the results and measure the execution time for point clouds generated from laser scanned measurements on a turbofan engine turbine blade with varying numbers of member points. The reconstructed edges fit the boundary points with an improvement factor of 4.7 over a standard polynomial fitting approach. Furthermore, through adding artificial noise it has been demonstrated that the detection algorithm is very robust for out-of-plane noise lower than 25% of the cloud resolution and it can produce satisfactory results when the noise is lower than 75%
The Baryon Fractions and Mass-to-Light Ratios of Early-Type Galaxies
We jointly model 22 early-type gravitational lens galaxies with stellar
dynamical measurements using standard CDM halo models. The sample is
inhomogeneous in both its mass distributions and the evolution of its stellar
populations unless the true uncertainties are significantly larger than the
reported measurement errors. In general, the individual systems cannot
constrain halo models, in the sense that the data poorly constrains the stellar
mass fraction of the halo. The ensemble of systems, however, strongly
constrains the average stellar mass represented by the visible galaxies to
of the halo mass if we neglect adiabatic compression, rising to
of the halo mass if we include adiabatic compression. Both
estimates are significantly smaller than the global baryon fraction,
corresponding to a star formation efficiency for early-type galaxies of
. In the adiabatically compressed models, we find an average local
B-band stellar mass-to-light ratio of (M/L)_0 =
(7.2\pm0.5)(M_{\sun}/L_{\sun}) that evolves by
per unit redshift. Adjusting the isotropy of the stellar orbits has little
effect on the results. The adiabatically compressed models are strongly favored
if we impose either local estimates of the mass-to-light ratios of early-type
galaxies or the weak lensing measurements for the lens galaxies on 100 kpc
scales as model constraints.Comment: 9 figure
- …