145 research outputs found

    A multi-input UV-VIS airborne GASCOD/A4r spectroradiometer for the validation of satellite remote sensing measurements

    Get PDF
    The present paper describes a UV-VIS spectroradiometer named GASCOD/A4r developed at ISAC-CNR for remote sensing measurements aboard stratospheric M55-Geophysica aircraft, flying up to 21 km. Obtained experimental data are used for retrieving of NO2, O3 and of other minor gases atmospheric content, applying the DOAS (Differential Optical Absorption Spectroscopy) method. UV actinic flux and J(NO2) are also derived. All these parameters are used for satellite data validation tasks. The specific results obtained during dedicated aircraft missions in different geographical areas have already been utilized for ENVISAT validation

    Torrential floods and town and country planning in Serbia

    Get PDF
    Torrential floods are the most frequent natural catastrophic events in Serbia, causing the loss of human lives and huge material damage, both in urban and rural areas. The analysis of the intra-annual distribution of maximal discharges aided in noticing that torrential floods have a seasonal character. The erosion and torrent control works (ETCWs) in Serbia began at the end of the 19th century. Effective protection from torrential floods encompasses biotechnical works on the slopes in the watershed and technical works on the torrent beds, within a precisely defined administrative and spatial framework in order to achieve maximal safety for people and their property. Cooperation to overcome the conflicts between the sectors of the water resources management, forestry, agriculture, energetics, environmental protection and local economic development groups is indispensable at the following levels: policy, spatial planning, practice, investments and education. The lowest and most effective level is through the Plans for Announcement of Erosive Regions (PAERs) and the Plans for Protection from Torrential Floods (PPTFs), with Hazard Zones (HZs) and Threatened Areas (TAs) mapping on the basis of the hydrologic, hydraulic and spatial analysis of the factors that are important for the formation of torrential floods. Solutions defined through PAERs and PPTFs have to be integrated into Spatial Plans at local and regional levels

    Artificial intelligence – the new suggestion for biomedicine, dentistry and healthcare

    Get PDF
    The development of technologies based on Artificial Intelligence (AI) and their application in medicine is growing rapidly. Innovations in digital technology, telemedicine, 5G technology and artificial intelligence (AI) create new opportunities for the development of the healthcare system. The aim of the present study is to explore the possibilities for the application of artificial intelligence in biomedicine, dentistry, healthcare and healthcare. In recent years there have been many major innovations, including the introduction of many new information and communication technologies. Digital innovations, including the further inclusion of telemedicine, the development of 5th generation wireless networks (5G) and artificial intelligence (AI) approaches, create an exceptional ecosystem for new health opportunities. The digital health sector creates a favorable environment for the provision of health services at a very high level

    Comparative study of heparin- and toluidine blue positive mast cells in porcine lumbar spinal ganglia

    Get PDF
    In the present study, toluidine blue for metachromasia and berberine sulfate for heparin fluorescence were used to determine the localisation and distribution of mast cells as well as the percent of hepa-rin-positive cells (MCH) in normal lumbar spinal ganglia (dorsal root ganglia) of domestic swine. Mast cells density was established after estimating the number of these cells per ganglion. Mast cells with metachromasia (MCTB) were observed predominantly in the ganglion capsule near the blood vessels. The number of mast cells inside the ganglia (2.10±1.45 in males and 2.20±1.03 in females) was significantly lower than in the capsule (13.30±1.95 in males and 13.60±2.42 in females) in both genders (P<0.001). Sexual dimorphism of the studied parameters was not established except for the slightly higher number of mast cells localised inside the left spinal ganglia of females than in males (P<0.05). The localisation of heparin-positive mast cells and the ratio between them and mast cells stained with toluidine blue (almost 2:1) was also determined. The percentage of heparin-positive mast cells in the ganglion capsule was 4 %, whereas inside the ganglion – 40%

    Herb Stem Cutter -Design and Research

    Get PDF
    Abstract IVANOV, D., G. KOSTADINOV, T. MITOVA and I. DIMITROV, 2006. Herb stem cutter -design and research. Bulg. J. Agric. Sci., The article presents the results of investigations on a herb stem cutting machine. Investigations were performed as a series of controlled single-factor experiments. The basic target functions of the study were as follows: drive&apos;s absorbed power of the machine (kW); specific energy consumption (kWh/t) and average cutting length (mm). The levels of controlled trial factors were as follows: machine load capacity with herb stem mass: Q = 0.5; 1 and 1.5 kg/s and feeding velocity of stem mass to the cutting drum: V = 2.0; 2.4 and 2.8 m/s. Here are the factors, maintained at stable levels: cutting drum peripheral velocity -25 m/s at rotation frequency of 1176 min -1 ; cutting drum working width -Β=0.558 mm; cutting drum diameter D=0.406 m; number of blades z=6; blade thickness b=10 mm; blade sharpening angle β=34°; inclination of blades&apos; edges to the counteredge α=15°; front cutting angle ϕ=50°; gap between blade and counterblade edges ∆=0.5 mm; sharpening angle of the counterblade β 1 =90° and sharpness of counterblade cutting edge δ=0.2 mm. The correlation between the variation of drive&apos;s absorbed power for startup of the cutting drum, specific energy consumption and average cutting length, on the one hand, and the variation of controlled factors, on the other, was established. The respective adequate regression equations were simulated, describing the herb stem cutting processes with specific accuracy

    Optimal Cutting Problem

    Get PDF
    One of the tasks of the Construction office of company STOBET Ltd is to create large sheets of paper containing a lot of objects describing a building construction as tables, charts, drawings, etc. For this reason it is necessary to arrange the small patterns in a given long sheet of paper with a minimum wastage. Another task of the company is to provide a way of cutting a stock material, e.g. given standard steel rods, into different number of smaller sized details in a way that minimizes the wasted material

    Perspectives of 2D and 3D mapping of atmospheric pollutants over urban areas by means of airborne DOAS spectrometers

    Get PDF
    tants, offering numerous advantages over conventional networks of in situ analysers. We propose some innovative solutions in the field of DOAS (Differential Optical Absorption Spectroscopy) remote systems, utilizing diffuse solar light as the radiation source. We examine the numerous potentialities of minor gas slant column calculations, applying the «off-axis» methodology for collecting the diffuse solar radiation. One of these particular approaches, using measurements along horizontal paths, has already been tested with the spectrometer installed on board the Geophysica aircraft during stratospheric flights up to altitudes of 20 km. The theoretical basis of these new measurement techniques using DOAS remote sensing systems are delineated to assess whether low altitude flights can provide 2D and 3D pollution tomography over metropolitan areas. The 2D or 3D trace gas total column mapping could be used to investigate: i) transport and dispersion phenomena of air pollution, ii) photochemical process rates, iii) gas plume tomography, iv) minor gas vertical profiles into the Planetary Boundary Layer and v) minor gas flux divergence over a large area

    A multi-input UV-VIS airborne GASCOD/A4r spectroradiometer for the validation of satellite remote sensing measurements

    Get PDF
    The present paper describes a UV-VIS spectroradiometer named GASCOD/A4r developed at ISAC-CNR for remote sensing measurements aboard stratospheric M55-Geophysica aircraft, flying up to 21 km. Obtained experimental data are used for retrieving of NO2, O3 and of other minor gases atmospheric content, applying the DOAS (Differential Optical Absorption Spectroscopy) method. UV actinic flux and J(NO2) are also derived. All these parameters are used for satellite data validation tasks. The specific results obtained during dedicated aircraft missions in different geographical areas have already been utilized for ENVISAT validation

    VALIDATION OF SCIAMACHY NO 2 VERTICAL COLUMN DENSITIES WITH MT.CIMONE AND STARA ZAGORA GROUND-BASED ZENITH SKY DOAS OBSERVATIONS

    Get PDF
    ABSTRACT Ground-based zenith sky Differential Optical Absorption Spectroscopy (DOAS) measurements performed by means of GASCOD instruments at Mt. Cimone (44N 11E), Italy and Stara Zagora (42N, 25E), Bulgaria are used for validation of SCIAMACHY NO 2 vertical column density (vcd) of ESA SCI_NL product retrieved with 5.01 processor version. The results presented in this work regard satellite data for the JulyDecember 2002 period. On this base it is concluded that during summer-autumn period the overall NO 2 vcd above both stations is fairly well reproduced by the SCIAMACHY data, while towards the winter period they deviate from the seasonal behaviour of NO 2 vcd derived at both stations
    • …
    corecore