4,251 research outputs found
Prone positioning during venovenous extracorporeal membrane oxygenation for acute respiratory distress syndrome: a pooled individual patient data analysis
Deformation of landfill from measurements of shear wave velocity and damping - Discussion
The author presents a method for using in-situ seismic test results to estimate the short-term deformations of geomaterials. The effort to introduce rational algorithms for the evaluation of settlements of shallow foundations on the basis of measured physical quantities is noteworthy, considering that current geotechnical design, especially on small-scale projects, is often based on empirical correlations between
settlements and penetration test results that rarely reflect the actual site conditions. In this context the development of simple procedures based on the results of relatively inexpensive in-situ tests including seismic tests is of paramount importance.
Nevertheless it is important to account properly for the physics of wave propagation when inferring material parameters from seismic test results. In this respect, the writers would like to make some observations related to the methods used to evaluate the shear wave velocity and material
damping ratio of the solid waste from surface wave measurements. This discussion is focused on and restricted to the aspects of the paper related to the use of surface wave methods to estimate the waste properties
Effective description of the short-time dynamics in open quantum systems
We address the dynamics of a bosonic system coupled to either a bosonic or a
magnetic environment, and derive a set of sufficient conditions that allow one
to describe the dynamics in terms of the effective interaction with a classical
fluctuating field. We find that for short interaction times the dynamics of the
open system is described by a Gaussian noise map for several different
interaction models and independently on the temperature of the environment. In
order to go beyond a qualitative understanding of the origin and physical
meaning of the above short-time constraint, we take a general viewpoint and,
based on an algebraic approach, suggest that any quantum environment can be
described by classical fields whenever global symmetries lead to the definition
of environmental operators that remain well defined when increasing the size,
i.e. the number of dynamical variables, of the environment. In the case of the
bosonic environment this statement is exactly demonstrated via a constructive
procedure that explicitly shows why a large number of environmental dynamical
variables and, necessarily, global symmetries, entail the set of conditions
derived in the first part of the work.Comment: 9 pages, close to published versio
Laser pulse annealing of ion-implanted GaAs
GaAs single-crystals wafers are implanted at room temperature with 400-keV Te + ions to a dose of 1×10^15 cm^–2 to form an amorphous surface layer. The recrystallization of this layer is investigated by backscattering spectrometry and transmission electron microscopy after transient annealing by Q-switched ruby laser irradiation. An energy density threshold of about 1.0 J/cm^2 exists above which the layer regrows epitaxially. Below the threshold the layer is polycrystalline; the grain size increases as the energy density approaches threshold. The results are analogous to those reported for the elemental semiconductors, Si and Ge. The threshold value observed is in good agreement with that predicted by the simple model successfully applied previously to Si and Ge
Assessment of the structural representativeness of sample data sets for the mechanical characterization of deep formations.
Accurate characterization of the mechanical behavior of geomaterials at depth is a fundamental need for geologic and engineering purposes. Laboratory tests on samples from well cores provide the material characterization in terms of mechanical response and other relevant properties. Representativeness of a sample data set with respect to the in situ conditions at depth is a key issue, which needs to be addressed to extrapolate the laboratory response to the whole rock mass. We have developed a procedure aimed at quantitatively evaluating the representativeness of laboratory samples. The methodology is based on joint processing of laboratory ultrasonic tests and wellbore sonic logs. A structural index is used to quantify the difference between the average structure of the laboratory sample and the structure of the formation at the wellbore scale. This index could be used to identify different causes of discrepancies between the behavior of the cored samples and the behavior of the rock formation as documented by well logs. Then, it could also be used to integrate laboratory data for the construction of a reliable geomechanical model with reference to the real in situ state. The methodology was applied to three different experimental data sets, showing the effectiveness of the method
Radiosounding: Possible change in aerological data due to instrument change
radiosounding system allows to measure the profile of some meteorological quantities (temperature, humidity, pressure) from the ground up to a certain altitude. Such systems are continuously used by meteorological services in order to perform periodical measurements during the day, at
pre-determined times. The evolution of instrumentation technology leads to a fast obsolescence of equipment
through time, so that, inevitably, new instrumentation replaces the old one. The new VAISALA Radiosound RS92 has been recently introduced to substitute previous model RS90. The RS90 is currently used by many national and international institutes, including the Italian Air Force Meteorological Service (Servizio Meteorologico dell’Aeronautica Militare). In order to assess the way in which the substitution of RS90s with the new RS92s would affect measures performed by the altitude observation network with regard also to the historical series, several comparative measurements have been conducted by the “Reparto Sperimentazioni di Meteorologia Aeronautica” at Vigna di Valle (Rome). During this testing series,
Company VAISALA has given a remarkable level of cooperation by a continuous presence of technicians. The entire test has been performed according to WMO (World Meteorological Organization) protocols
Dynamic Response of Cantilever Retaining Walls Considering Soil Non-Linearity
For many decades the analysis of earth retaining structures under dynamic or seismic conditions has been carried out by means of standard limit equilibrium (Coulomb, M-O) or elastic methods (Wood, Veletsos and Younan). These approaches are simplified, as they make use of considerable approximations which are often applicable only under particular conditions. A different and perhaps more realistic approach is possible using established computer codes, which integrate numerically the governing equations of the soil and wall media. Since these problems may involve significant levels of strain in the backfill, material non-linearity should be taken into account to realistically simulate the response of the system. In the herein-reported study, a parametric analysis is carried out through the finite-difference code FLAC 5.0. Starting from simple cases involving elastic response, and moving gradually towards more realistic conditions, salient features of the dynamic wall-soil interaction problem are addressed. The case of non-linear hysteretic behaviour of soil and flexibility of wall is considered at a second stage. Results indicate that with increasing levels of acceleration, there is a clear transition from elastic behaviour (in which the aforementioned V-Y type methods are applicable), to plastic behaviour in which M-O methods are thought to be more suitable under pseudo-static conditions. The results of the parametric analyses are reported in terms of pertinent normalized parameters, to provide a general framework for the assessment of wall-soil dynamic interaction under strong seismic excitation
- …