Mechanical Dispersion of Nanoparticles and Its Effect on the Specific Heat Capacity of Impure Binary Nitrate Salt Mixtures

In this study, the effect of nanoparticle concentration was tested for both CuO and TiO2 in eutectic mixture of sodium and potassium nitrate. Results showed an enhancement in specific heat capacity (Cp) for both types of nanoparticles (+10.48% at 440 °C for 0.1 wt % CuO and +4.95% at 440 °C for 0.5 wt % TiO2) but the behavior toward a rise in concentration was different with CuO displaying its highest enhancement at the lowest concentration whilst TiO2 showed no concentration dependence for three of the four different concentrations tested. The production of cluster of nanoparticles was visible in CuO but not in TiO2. This formation of nanostructure in molten salt might promote the enhancement in Cp. However, the size and shape of these structures will most likely impact the energy density of the molten salt

In Situ Production of Copper Oxide Nanoparticles in a Binary Molten Salt for Concentrated Solar Power Plant Applications

Seeding nanoparticles in molten salts has been shown recently as a promising way to improve their thermo-physical properties. The prospect of such technology is of interest to both academic and industrial sectors in order to enhance the specific heat capacity of molten salt. The latter is used in concentrated solar power plants as both heat transfer fluid and sensible storage. This work explores the feasibility of producing and dispersing nanoparticles with a novel one pot synthesis method. Using such a method, CuO nanoparticles were produced in situ via the decomposition of copper sulphate pentahydrate in a KNO3-NaNO3 binary salt. Analyses of the results suggested preferential disposition of atoms around produced nanoparticles in the molten salt. Thermal characterization of the produced nano-salt suspension indicated the dependence of the specific heat enhancement on particle morphology and distribution within the salts

Effectiveness of the European chromium(vi) directive for cement implementation on occupational allergic contact dermatitis occurrence: assessment in France and the U.K.

International audienc

In situ production of titanium dioxide nanoparticles in molten salt phase for thermal energy storage and heat-transfer fluid applications

In this study, TiO2 nanoparticles (average particle size 16 nm) were successfully produced in molten salt phase and were showed to significantly enhance the specific heat capacity of a binary eutectic mixture of sodium and potassium nitrate (60/40) by 5.4 % at 390 °C and 7.5 % at 445 °C for 3.0 wt% of precursors used. The objective of this research was to develop a cost-effective alternate method of production which is potentially scalable, as current techniques utilized are not economically viable for large quantities. Enhancing the specific heat capacity of molten salt would promote more competitive pricing for electricity production by concentrating solar power plant. Here, a simple precursor (TiOSO4) was added to a binary eutectic mixture of potassium and sodium nitrate, heated to 450 °C, and cooled to witness the production of nanoparticles

Programmed health surveillance and detection of emerging diseases in occupational health: contribution of the French national occupational disease surveillance and prevention network (RNV3P)

Objective The French national occupational disease surveillance and prevention network (RNV3P) includes the 30 occupational disease consultation centres in university hospitals to which patients are referred for potentially work-related diseases, and an occupational health service. The aim of this work is to demonstrate the contribution of RNV3P to national health surveillance.Methods Data from consultations are recorded in standardised occupational health reports and coded using international or national classifications. Programmed health surveillance is carried out through annual follow-up of annual referrals to experts for pre-selected disease–exposure associations, as well as incidence estimations for the well characterised working population followed by the occupational health service. Hypotheses on new emerging diseases are generated using statistical methods employed in pharmacosurveillance and by modelling as an exposome to analyse multiple exposures. Results 58 777 occupational health reports were collected and analysed from 2001 to 2007. Referrals to the 30 university hospital centres increased significantly for asbestos-related diseases, mood disorders and adjustment disorders related to psychological and organisational demands, and for elbow and shoulder disorders related to manual handling. Referrals significantly decreased for asthma and for rhinitis related to exposure to organic dusts (vegetable or animal) or chemicals, except for cosmetics and cleaning products. Estimation of incidences by the occupational health services showed different patterns in different sectors of activity. The methods for detecting emerging diseases are presented and illustrated using the example of systemic sclerosis, identifying new exposures and new sectors of activity to be investigated. Conclusion The RNV3P collects data from two complementary samples: 30 university hospital centres (workers or former workers) and an occupational health service (current workers). This dual approach is useful for surveillance and for hypothesis generation on new emerging disease–exposure associations

Mineral trioxyde aggregate versus calcium hydroxide in apexification of non vital immature teeth: Study protocol for a randomized controlled trial

<p>Abstract</p> <p>Background</p> <p>Pulp necrosis is one of the main complications of dental trauma. When it happens on an immature tooth, pulp necrosis implies a lack of root maturation and apical closure. A therapy called apexification is required to induce the formation of a calcified apical barrier allowing a permanent and hermetic root filling. The aim of this prospective randomized clinical trial is to compare Mineral Trioxide Aggregate(MTA)with Calcium Hydroxide(CH)as materials used to induce root-end closure in necrotic permanent immature incisors.</p> <p>Methods/Design</p> <p>This study, promoted by AP-HP, was approved by the ethics committee(CPP Paris Ile de France IV). 34 children aged from 6 to 18 years and presenting a non-vital permanent incisor are selected. Prior to treatment, an appropriate written consent has to be obtained from both parents and from children. Patients are then randomly assigned to either the MTA(experimental)or CH(control)groups. Recalls are performed after 3, 6 and 12 months to determine the presence or absence of a calcified apical barrier through the use of clinical and radiographic exams. Additional criteria such as clinical symptoms, apical radiolucencies, periapical index(PAI)are also noted.</p> <p>Trial registration</p> <p>ClinicalTrials.gov no. <a href="http://www.clinicaltrials.gov/ct2/show/NCT00472173">NCT00472173</a> (First inclusion: May 10, 2007; Last inclusion: April 23, 2009; study completed: April 15, 2010)</p

Azithromycin reduces spontaneous and induced inflammation in ΔF508 cystic fibrosis mice

BACKGROUND: Inflammation plays a critical role in lung disease development and progression in cystic fibrosis. Azithromycin is used for the treatment of cystic fibrosis lung disease, although its mechanisms of action are poorly understood. We tested the hypothesis that azithromycin modulates lung inflammation in cystic fibrosis mice. METHODS: We monitored cellular and molecular inflammatory markers in lungs of cystic fibrosis mutant mice homozygous for the ΔF508 mutation and their littermate controls, either in baseline conditions or after induction of acute inflammation by intratracheal instillation of lipopolysaccharide from Pseudomonas aeruginosa, which would be independent of interactions of bacteria with epithelial cells. The effect of azithromycin pretreatment (10 mg/kg/day) given by oral administration for 4 weeks was evaluated. RESULTS: In naive cystic fibrosis mice, a spontaneous lung inflammation was observed, characterized by macrophage and neutrophil infiltration, and increased intra-luminal content of the pro-inflammatory cytokine macrophage inflammatory protein-2. After induced inflammation, cystic fibrosis mice combined exaggerated cellular infiltration and lower anti-inflammatory interleukin-10 production. In cystic fibrosis mice, azithromycin attenuated cellular infiltration in both baseline and induced inflammatory condition, and inhibited cytokine (tumor necrosis factor-α and macrophage inflammatory protein-2) release in lipopolysaccharide-induced inflammation. CONCLUSION: Our findings further support the concept that inflammatory responses are upregulated in cystic fibrosis. Azithromycin reduces some lung inflammation outcome measures in cystic fibrosis mice. We postulate that some of the benefits of azithromycin treatment in cystic fibrosis patients are due to modulation of lung inflammation

Choosing the right cell line for breast cancer research

Breast cancer is a complex and heterogeneous disease. Gene expression profiling has contributed significantly to our understanding of this heterogeneity at a molecular level, refining taxonomy based on simple measures such as histological type, tumour grade, lymph node status and the presence of predictive markers like oestrogen receptor and human epidermal growth factor receptor 2 (HER2) to a more sophisticated classification comprising luminal A, luminal B, basal-like, HER2-positive and normal subgroups. In the laboratory, breast cancer is often modelled using established cell lines. In the present review we discuss some of the issues surrounding the use of breast cancer cell lines as experimental models, in light of these revised clinical classifications, and put forward suggestions for improving their use in translational breast cancer research