A Computational Approach for Model Update of an LS-DYNA Energy Absorbing Cell

NASA and its contractors are working on structural concepts for absorbing impact energy of aerospace vehicles. Recently, concepts in the form of multi-cell honeycomb-like structures designed to crush under load have been investigated for both space and aeronautics applications. Efforts to understand these concepts are progressing from tests of individual cells to tests of systems with hundreds of cells. Because of fabrication irregularities, geometry irregularities, and material properties uncertainties, the problem of reconciling analytical models, in particular LS-DYNA models, with experimental data is a challenge. A first look at the correlation results between single cell load/deflection data with LS-DYNA predictions showed problems which prompted additional work in this area. This paper describes a computational approach that uses analysis of variance, deterministic sampling techniques, response surface modeling, and genetic optimization to reconcile test with analysis results. Analysis of variance provides a screening technique for selection of critical parameters used when reconciling test with analysis. In this study, complete ignorance of the parameter distribution is assumed and, therefore, the value of any parameter within the range that is computed using the optimization procedure is considered to be equally likely. Mean values from tests are matched against LS-DYNA solutions by minimizing the square error using a genetic optimization. The paper presents the computational methodology along with results obtained using this approach

On the origin of the λ\lambda-transition in liquid Sulphur

Developing a novel experimental technique, we applied photon correlation spectroscopy using infrared radiation in liquid Sulphur around $T_\lambda$, i.e. in the temperature range where an abrupt increase in viscosity by four orders of magnitude is observed upon heating within few degrees. This allowed us - overcoming photo-induced and absorption effects at visible wavelengths - to reveal a chain relaxation process with characteristic time in the ms range. These results do rehabilitate the validity of the Maxwell relation in Sulphur from an apparent failure, allowing rationalizing the mechanical and thermodynamic behavior of this system within a viscoelastic scenario.Comment: 5 pages, 4 eps figures, accepted in Phys. Rev. Let

Experimental and Analytical Evaluation of a Composite Honeycomb Deployable Energy Absorber

In 2006, the NASA Subsonic Rotary Wing Aeronautics Program sponsored the experimental and analytical evaluation of an externally deployable composite honeycomb structure that is designed to attenuate impact energy during helicopter crashes. The concept, which is designated the Deployable Energy Absorber (DEA), utilizes an expandable Kevlar honeycomb structure to dissipate kinetic energy through crushing. The DEA incorporates a unique flexible hinge design that allows the honeycomb to be packaged and stowed flat until needed for deployment. A variety of deployment options such as linear, radial, and/or hybrid methods can be used. Experimental evaluation of the DEA utilized a building block approach that included material characterization testing of its constituent, Kevlar -129 fabric/epoxy, and flexural testing of single hexagonal cells. In addition, the energy attenuation capabilities of the DEA were demonstrated through multi-cell component dynamic crush tests, and vertical drop tests of a composite fuselage section, retrofitted with DEA blocks, onto concrete, water, and soft soil. During each stage of the DEA evaluation process, finite element models of the test articles were developed and simulations were performed using the explicit, nonlinear transient dynamic finite element code, LS-DYNA. This report documents the results of the experimental evaluation that was conducted to assess the energy absorption capabilities of the DEA

Buckling Testing and Analysis of Honeycomb Sandwich Panel Arc Segments of a Full-Scale Fairing Barrel: Comparison of In- and Out-of-Autoclave Facesheet Configurations

Four honeycomb sandwich panels, representing 1/16th arc segments of a 10-m diameter barrel section of the Heavy Lift Launch Vehicle, were manufactured and tested under the NASA Composites for Exploration and the NASA Constellation Ares V programs. Two configurations were chosen for the panels: 6-ply facesheets with 1.125 in. honeycomb core and 8-ply facesheets with 1.0 in. honeycomb core. Additionally, two separate carbon fiber/epoxy material systems were chosen for the facesheets: in-autoclave IM7/977-3 and out-of-autoclave T40-800b/5320-1. Smaller 3 ft. by 5 ft. panels were cut from the 1/16th barrel sections and tested under compressive loading. Furthermore, linear eigenvalue and geometrically nonlinear finite element analyses were performed to predict the compressive response of each 3 ft. by 5 ft. panel. To improve the robustness of the geometrically nonlinear finite element model, measured surface imperfections were included in the geometry of the model. Both the linear and nonlinear models yielded good qualitative and quantitative predictions. Additionally, it was correctly predicted that the panel would fail in buckling prior to failing in strength. Furthermore, several imperfection studies were performed to investigate the influence of geometric imperfections, fiber angle misalignments, and three-dimensional effects on the compressive response of the panel

Is there an orthographic boost for ambiguous words during their processing?

The present study explores the issue of why ambiguous words are recognized faster than unambiguous ones during word recognition. To this end we contrasted two different hypotheses: the semantic feedback hypothesis (Hino and Lupker in J Exp Psychol Hum Percept Perform 22:1331-1356, 1996. https://doi.org/10.1037/0096-1523.22.6.1331 ), and the hypothesis proposed by Borowsky and Masson (J Exp Psychol Learn Mem Cognit 22:63-85, 1996. https://doi.org/10.1037/0278-7393.22.1.63 ). Although both hypotheses agree that ambiguous words benefit during recognition in that they engage more semantic activation, they disagree as to whether or not this greater semantic activation feeds back to the orthographic level, hence speeding up the orthographic coding of ambiguous words. Participants were presented with ambiguous and unambiguous words in two tasks, a lexical decision task (LDT) and a two-alternative forced-choice task (2AFC). We found differences between ambiguous and unambiguous words in both the LDT and the 2AFC tasks. These results suggest that the orthographic coding of ambiguous words is boosted during word processing. This finding lends support to the semantic feedback hypothesis.This research was funded by the Spanish Ministry of Economy and Competitiveness (PSI2015-63525-P) and by the Research Promotion Program of the Universitat Rovira i Virgili (2016PFR-URV-B2-37). This has also been partially supported by the FCT (Foundation for Science and Technology) through the state budget with Reference IF/00784/2013/CP1158/CT0013. The first author also holds a grant from the Universitat Rovira i Virgili (2015PMF-PIPF-16)

Women leaders in the political field in Scotland:A socio-historical approach to the emergence of leaders

Drawing on a contextualised case, we present a specific approach to leadership studies that brings together history, sociology and politics. We start with the following event. In August 2015, the election of Kezia Dugdale as leader of the Labour Party meant that, for the first time the leaders of the three main political parties in the Scottish Parliament were women. We approach the study of this significant leadership event, first, through a critique of aspects of leadership studies as a field. We next consider the potential for socio-historical approaches in understanding this event. Then, as a contextualised example of this alternative approach to studying leadership, we apply Bourdieu’s theoretical concepts – in particular the political field – in order to historicise the conditions of possibility of this event. Finally, we consider issues of power and gender in relation to how the leaders position themselves in relation to their parties and to each other within the political field. In so doing, we contribute to critical leadership studies by developing and demonstrating a socio-historical approach that can help us to identify processes of organisation and change in relation to the emergence of leaders