Thermal vortex dynamics in thin circular ferromagnetic nanodisks

The dynamics of gyrotropic vortex motion in a thin circular nanodisk of soft ferromagnetic material is considered. The demagnetization field is calculated using two-dimensional Green's functions for the thin film problem and fast Fourier transforms. At zero temperature, the dynamics of the Landau-Lifshitz-Gilbert equation is simulated using fourth order Runge-Kutta integration. Pure vortex initial conditions at a desired position are obtained with a Lagrange multipliers constraint. These methods give accurate estimates of the vortex restoring force constant $k_F$ and gyrotropic frequency, showing that the vortex core motion is described by the Thiele equation to very high precision. At finite temperature, the second order Heun algorithm is applied to the Langevin dynamical equation with thermal noise and damping. A spontaneous gyrotropic motion takes place without the application of an external magnetic field, driven only by thermal fluctuations. The statistics of the vortex radial position and rotational velocity are described with Boltzmann distributions determined by $k_F$ and by a vortex gyrotropic mass $m_G=G^2/k_F$, respectively, where $G$ is the vortex gyrovector.Comment: 18 pages, 17 figure

Resonant tunnelling diode based high speed optoelectronic transmitters

Resonant tunneling diode (RTD) integration with photo detector (PD) from epi-layer design shows great potential for combining terahertz (THz) RTD electronic source with high speed optical modulation. With an optimized layer structure, the RTD-PD presented in the paper shows high stationary responsivity of 5 A/W at 1310 nm wavelength. High power microwave/mm-wave RTD-PD optoelectronic oscillators are proposed. The circuitry employs two RTD-PD devices in parallel. The oscillation frequencies range from 20-44 GHz with maximum attainable power about 1 mW at 34/37/44GHz.European Commission [645369

Influence of hydrochloric acid concentration on the demineralization of cortical bone

Although demineralized bone matrix has been considered a successful grafting material, combining both osteoconductive and osteoinductive properties, conflicting results have been published in the literature regarding its bone-inducing abilities. This may be a consequence of following different demineralization procedures that naturally result in products with different properties. The present work examines the evaluation of the demineralization process of similar samples of human cortical bone using three different concentrations of hydrochloric acid solutions (0.6 M, 1.2 M and 2.4 M). Sample calcium content was determined (by Atomic Absorption Spectroscopy) at various immersion times, allowing the construction of the corresponding kinetic profiles. Phase and chemical composition were enabled by X-Ray Diffraction Spectroscopy and Fourier Transform Infrared Analysis, respectively. Structural modifications were followed by Light and Scanning Electron Microscopy and quantified by mercury porosimetry (in terms of porosity and pore size distribution). As expected, increasing the acid concentration led to an increase in the demineralization rate, but not in a proportional way. However, one of the most significant effects of the acid concentration was found on the sample structural features. In fact, a considerable increment in porosity was detected for the sample subjected to the highest hydrochloric acid concentration. Microscopic observations demonstrated that despite the structural deformation resultant from demineralization, the basic microstructure was preserved

Semilinear Elliptic Systems: A survey of superlinear problems

In this paper we survey recent results on existence of solutions for elliptic Hamiltonean systems

PLC based Structure for Management and Control of Distributed Energy Production Units

Today, the improvements in system communications have stimulated the implementation of distributed systems. These distributed systems are then usually managed by a centralized supervisory platform, commonly known as a SCADA system (Supervisory Control And Data Acquisition). This strategy reaches different fields, from agriculture, to industry, building automation, etc (Figueiredo & Botto, 2005), (Figueiredo & Sá Costa, 2007). An optimal-performance supervisory system has the objective to allocate the minimal needed power generation to the traditional power plant in order to produce the electricity at a minimal economic cost. This paper presents a supervisory system to monitor and control energy production and consumption, in an optimized way. The developed system consists of a network of Programmable Logic Controllers (PLC), controlling locally the electricity production in each source, and measuring, in a real time base, the power consumption and production. The PLC network is parameterized according to the traditional Master-Slave requirements, using the PROFIBUS communication (Siemens, 2001). A SCADA system is implemented in order to supervise the entire PLC network. This monitoring and control strategy is simulated based on the requirements of the renewable energy park that is being assembled in Évora University. This experimental park is founded by an European project (PETER) with Évora University – Portugal and Extremadura University – Spain. The PETER park is a renewable energy park that plans to include a photovoltaic unit (10 KW), a wind generator (1KW) and a biomass unit (75KW)

Spillover and diffraction sidelobe contamination in a double-shielded experiment for mapping Galactic synchrotron emission

We have analyzed observations from a radioastronomical experiment to survey the sky at decimetric wavelengths along with feed pattern measurements in order to account for the level of ground contamination entering the sidelobes. A major asset of the experiment is the use of a wire mesh fence around the rim-halo shielded antenna with the purpose of levelling out and reducing this source of stray radiation for zenith-centered 1-rpm circular scans. We investigate the shielding performance of the experiment by means of a geometric diffraction model in order to predict the level of the spillover and diffraction sidelobes in the direction of the ground. Using 408 MHz and 1465 MHz feed measurements, the model shows how a weakly-diffracting and unshielded antenna configuration becomes strongly-diffracting and double-shielded as far-field diffraction effects give way to near-field ones. Due to the asymmetric response of the feeds, the orientation of their radiation fields with respect to the secondary must be known a priori before comparing model predictions with observational data. By adjusting the attenuation coefficient of the wire mesh the model is able to reproduce the amount of differential ground pick-up observed during test measurements at 1465 MHz.Comment: 14 pages, 17 eps + 1 gif figures and 4 Tables. Accepted for publication in A&AS. Fig.7 available at full resolution from http://www.das.inpe.br/~tello/publications.ht

Foeniculum vulgare Essential Oils: Chemical Composition, Antioxidant and Antimicrobial Activities

The essential oils from Foeniculum vulgare commercial aerial parts and fruits were isolated by hydrodistillation, with different distillation times (30 min, I h, 2 h and 3 h), and analyzed by GC and GC-MS. The antioxidant ability was estimated using four distinct methods. Antibacterial activity was determined by the agar diffusion method. Remarkable differences, and worrying from the quality and safety point of view, were detected in the essential oils. trans-Anethole (31-36%), alpha-pinene (14-20%) and limonene (11-13%) were the main components of the essentials oil isolated from F. vulgare dried aerial parts, whereas methyl chavicol (= estragole) (79-88%) was dominant in the fruit oils. With the DPPH method the plant oils showed better antioxidant activity than the fruits oils. With the TBARS method and at higher concentrations, fennel essential oils showed a pro-oxidant activity. None of the oils showed a hydroxyl radical scavenging capacity >50%, but they showed an ability to inhibit 5-lipoxygenase. The essential oils showed a very low antimicrobial activity. In general, the essential oils isolated during 2 h were as effective, from the biological activity point of view, as those isolated during 3 h.info:eu-repo/semantics/publishedVersio