299 research outputs found
Why Do Only Some Galaxy Clusters Have Cool Cores?
Flux-limited X-ray samples indicate that about half of rich galaxy clusters
have cool cores. Why do only some clusters have cool cores while others do not?
In this paper, cosmological N-body + Eulerian hydrodynamic simulations,
including radiative cooling and heating, are used to address this question as
we examine the formation and evolution of cool core (CC) and non-cool core
(NCC) clusters. These adaptive mesh refinement simulations produce both CC and
NCC clusters in the same volume. They have a peak resolution of 15.6 h^{-1} kpc
within a (256 h^{-1} Mpc)^3 box. Our simulations suggest that there are
important evolutionary differences between CC clusters and their NCC
counterparts. Many of the numerical CC clusters accreted mass more slowly over
time and grew enhanced cool cores via hierarchical mergers; when late major
mergers occurred, the CC's survived the collisions. By contrast, NCC clusters
experienced major mergers early in their evolution that destroyed embryonic
cool cores and produced conditions that prevented CC re-formation. As a result,
our simulations predict observationally testable distinctions in the properties
of CC and NCC beyond the core regions in clusters. In particular, we find
differences between CC versus NCC clusters in the shapes of X-ray surface
brightness profiles, between the temperatures and hardness ratios beyond the
cores, between the distribution of masses, and between their supercluster
environs. It also appears that CC clusters are no closer to hydrostatic
equilibrium than NCC clusters, an issue important for precision cosmology
measurements.Comment: 17 emulateapj pages, 17 figures, replaced with version accepted to
Ap
Two-Dimensional Hydrodynamic Simulations of Convection in Radiation-Dominated Accretion Disks
The standard equilibrium for radiation-dominated accretion disks has long
been known to be viscously, thermally, and convectively unstable, but the
nonlinear development of these instabilities---hence the actual state of such
disks---has not yet been identified. By performing local two-dimensional
hydrodynamic simulations of disks, we demonstrate that convective motions can
release heat sufficiently rapidly as to substantially alter the vertical
structure of the disk. If the dissipation rate within a vertical column is
proportional to its mass, the disk settles into a new configuration thinner by
a factor of two than the standard radiation-supported equilibrium. If, on the
other hand, the vertically-integrated dissipation rate is proportional to the
vertically-integrated total pressure, the disk is subject to the well-known
thermal instability. Convection, however, biases the development of this
instability toward collapse. The end result of such a collapse is a gas
pressure-dominated equilibrium at the original column density.Comment: 10 pages, 7 figures, accepted for publication in ApJ. Please send
comments to [email protected]
Receptor modeling application framework for particle source apportionment
Receptor models infer contributions from particulate matter (PM) source types using multivariate measurements of particle chemical and physical properties. Receptor models complement source models that estimate concentrations from emissions inventories and transport meteorology. Enrichment factor, chemical mass balance, multiple linear regression, eigenvector, edge detection, neural network, aerosol evolution, and aerosol equilibrium models have all been used to solve particulate air quality problems, and more than 500 citations of their theory and application document these uses. While elements, ions, and carbons were often used to apportion TSP, PM10, and PM2.5 among many source types, many of these components have been reduced in source emissions such that more complex measurements of carbon fractions, specific organic compounds, single particle characteristics, and isotopic abundances now need to be measured in source and receptor samples. Compliance monitoring networks are not usually designed to obtain data for the observables, locations, and time periods that allow receptor models to be applied. Measurements from existing networks can be used to form conceptual models that allow the needed monitoring network to be optimized. The framework for using receptor models to solve air quality problems consists of: (1) formulating a conceptual model; (2) identifying potential sources; (3) characterizing source emissions; (4) obtaining and analyzing ambient PM samples for major components and source markers; (5) confirming source types with multivariate receptor models; (6) quantifying source contributions with the chemical mass balance; (7) estimating profile changes and the limiting precursor gases for secondary aerosols; and (8) reconciling receptor modeling results with source models, emissions inventories, and receptor data analyses
Concentrations of mobile source air pollutants in urban microenvironments
Human exposures to criteria and hazardous air pollutants (HAPs) in urban areas vary greatly due to temporal-spatial variations in emissions, changing meteorology, varying proximity to sources, as well as due to building, vehicle, and other environmental characteristics that influence the amounts of ambient pollutants that penetrate or infiltrate into these microenvironments. Consequently, the exposure estimates derived from central-site ambient measurements are uncertain and tend to underestimate actual exposures. The Exposure Classification Project (ECP) was conducted to measure pollutant concentrations for common urban microenvironments (MEs) for use in evaluating the results of regulatory human exposure models. Nearly 500 sets of measurements were made in three Los Angeles County communities during fall 2008, winter 2009, and summer 2009. MEs included in-vehicle, near-road, outdoor, and indoor locations accessible to the general public. Contemporaneous 1-to 15-min average personal breathing zone concentrations of carbon monoxide (CO), carbon dioxide (CO 2 ), volatile organic compounds (VOCs), nitric oxide (NO), nitrogen oxides (NO x ), particulate matter (<2.5 mm diameter; PM 2.5 ) mass, ultrafine particle (UFP; <100 nm diameter) number, black carbon (BC), speciated HAPs (e.g., benzene, toluene, ethylbenzene, xylenes [BTEX], 1,3-butadiene), and ozone (O 3 ) were measured continuously. In-vehicle and inside/outside measurements were made in various passenger vehicle types and in public buildings to estimate penetration or infiltration factors. A large fraction of the observed pollutant concentrations for on-road MEs, especially near diesel trucks, was unrelated to ambient measurements at nearby monitors. Comparisons of ME concentrations estimated using the median ME/ambient ratio versus regression slopes and intercepts indicate that the regression approach may be more accurate for on-road MEs. Ranges in the ME/ambient ratios among ME categories were generally greater than differences among the three communities for the same ME category, suggesting that the ME proximity factors may be more broadly applicable to urban MEs. Implications: Estimates of population exposure to air pollutants extrapolated from ambient measurements at ambient fixed site monitors or exposure surrogates are prone to uncertainty. This study measured concentrations of mobile source air toxics (MSAT) and related criteria pollutants within in-vehicle, outdoor near-road, and indoor urban MEs to provide multipollutant ME measurements that can be used to calibrate regulatory exposure models
Simple holographic duals to boundary CFTs
By relaxing the regularity conditions imposed in arXiv:1107.1722 on half-BPS
solutions to six-dimensional Type~4b supergravity, we enlarge the space of
solutions to include two new half-BPS configurations, which we refer to as the
\kap\ and the \funnel. We give evidence that the \kap\ and \funnel\ can be
interpreted as fully back-reacted brane solutions with respectively and
world volumes. \kap\ and \funnel\ solutions with a single
asymptotic region are constructed analytically. We argue
that \kap\ solutions provide simple examples of holographic duals to boundary
CFTs in two dimensions and present calculations of their holographic boundary
entropy to support the BCFT dual picture.Comment: 37 pages, pdflatex, 5 figure
N=2 supergravity in five dimensions revisited
We construct matter-coupled N=2 supergravity in five dimensions, using the
superconformal approach. For the matter sector we take an arbitrary number of
vector-, tensor- and hyper-multiplets. By allowing off-diagonal vector-tensor
couplings we find more general results than currently known in the literature.
Our results provide the appropriate starting point for a systematic search for
BPS solutions, and for applications of M-theory compactifications on Calabi-Yau
manifolds with fluxes.Comment: 35 pages; v.2: A sign changed in a bilinear fermion term in (5.7
The Impact of Railway Stations on Residential and Commercial Property Value: A Meta-analysis
Railway stations function as nodes in transport networks and places in an urban environment. They have accessibility and environmental impacts, which contribute to property value. The literature on the effects of railway stations on property value is mixed in its finding in respect to the impact magnitude and direction, ranging from a negative to an insignificant or a positive impact. This paper attempts to explain the variation in the findings by meta-analytical procedures. Generally the variations are attributed to the nature of data, particular spatial characteristics, temporal effects and methodology. Railway station proximity is addressed from two spatial considerations: a local station effect measuring the effect for properties with in 1/4 mile range and a global station effect measuring the effect of coming 250 m closer to the station. We find that the effect of railway stations on commercial property value mainly takes place at short distances. Commercial properties within 1/4 mile rang are 12.2% more expensive than residential properties. Where the price gap between the railway station zone and the rest is about 4.2% for the average residence, it is about 16.4% for the average commercial property. At longer distances the effect on residential property values dominate. We find that for every 250 m a residence is located closer to a station its price is 2.3% higher than commercial properties. Commuter railway stations have a consistently higher positive impact on the property value compared to light and heavy railway/Metro stations. The inclusion of other accessibility variables (such as highways) in the models reduces the level of reported railway station impact. © 2007 Springer Science+Business Media, LLC
Superconformal N=2, D=5 matter with and without actions
We investigate N=2, D=5 supersymmetry and matter-coupled supergravity
theories in a superconformal context. In a first stage we do not require the
existence of a Lagrangian. Under this assumption, we already find at the level
of rigid supersymmetry, i.e. before coupling to conformal supergravity, more
general matter couplings than have been considered in the literature. For
instance, we construct new vector-tensor multiplet couplings, theories with an
odd number of tensor multiplets, and hypermultiplets whose scalar manifold
geometry is not hyperkaehler.
Next, we construct rigid superconformal Lagrangians. This requires some extra
ingredients that are not available for all dynamical systems. However, for the
generalizations with tensor multiplets mentioned above, we find corresponding
new actions and scalar potentials. Finally, we extend the supersymmetry to
local superconformal symmetry, making use of the Weyl multiplet. Throughout the
paper, we will indicate the various geometrical concepts that arise, and as an
application we compute the non-vanishing components of the Ricci tensor of
hypercomplex group manifolds. Our results can be used as a starting point to
obtain more general matter-couplings to Poincare supergravity.Comment: 67 pages; v2: title of reference changed and small editing
corrections; v3: small typing errors corrected, version published in JHEP;
v4: typos corrected; v5: additional term in (2.109) and (4.11); v6: change of
order of indices in (2.89
An Exploratory Landscape Metrics Approach to Agricultural Changes: Applications of Spatial Economic Consequences for the Algarve, Portugal
MAP kinase pathways and calcitonin influence CD44 alternate isoform expression in prostate cancer cells
<p>Abstract</p> <p>Background</p> <p>Dysregulated expression and splicing of cell adhesion marker CD44 is found in many types of cancer. In prostate cancer (PC) specifically, the standard isoform (CD44s) has been found to be downregulated compared with benign tissue whereas predominant variant isoform CD44v7-10 is upregulated. Mitogen-activated protein kinase pathways and paracrine calcitonin are two common factors linked to dysregulated expression and splicing of CD44 in cancer. Calcitonin has been found to increase proliferation and invasion in PC acting through the protein kinase A pathway.</p> <p>Methods</p> <p>In androgen-independent PC with known high CD44v7-10 expression, CD44 total and CD44v7-10 RNA or protein were assessed in response to exogenous and endogenous calcitonin and to inhibitors of protein kinase A, MEK, JNK, or p38 kinase. Benign cells and calcitonin receptor-negative PC cells were also tested.</p> <p>Results</p> <p>MEK or p38 but not JNK reduced CD44 total RNA by 40%–65% in cancer and benign cells. Inhibition of protein kinase A reduced CD44 total and v7-10 protein expression. In calcitonin receptor-positive cells only, calcitonin increased CD44 variant RNA and protein by 3 h and persisting to 48 h, apparently dependent on an uninhibited p38 pathway. Cells with constitutive CT expression showed an increase in CD44v7-10 mRNA but a decrease in CD44 total RNA.</p> <p>Conclusion</p> <p>The MEK pathway increases CD44 RNA, while calcitonin, acting through the protein kinase A and p38 pathway, facilitates variant splicing. These findings could be used in the formulation of therapeutic methods for PC targeting CD44 alternate splicing.</p
- …