Design of Inorganic Water Repellent Coatings for Thermal Protection Insulation on an Aerospace Vehicle

In this report, thin film deposition of one of the model candidate materials for use as water repellent coating on the thermal protection systems (TPS) of an aerospace vehicle was investigated. The material tested was boron nitride (BN), the water-repellent properties of which was detailed in our other investigation. Two different methods, chemical vapor deposition (CVD) and pulsed laser deposition (PLD), were used to prepare the BN films on a fused quartz substrate (one of the components of thermal protection systems on aerospace vehicles). The deposited films were characterized by a variety of techniques including X-ray diffraction, X-ray photoelectron spectroscopy, and scanning electron microscopy. The BN films were observed to be amorphous in nature, and a CVD-deposited film yielded a contact angle of 60 degrees with water, similar to the pellet BN samples investigated previously. This demonstrates that it is possible to use the bulk sample wetting properties as a guideline to determine the candidate waterproofing material for the TPS

Sulfonate Adsorption and Wetting Behavior at Solid-Water Interfaces

The electrophoretic mobilities of silver iodide sol particles have been measured as a function of pAg in the presence of var,ious concentrations of C5, C8, C10, C12 and C14 sodium alkyl sulfonates at constant ionic strength and temperature. Contact angles in the solid-air-solution system both in the absence and in the presence of the C14 sulfonate have also been determined. These results have been compared with previously reported work on the effect of alkyl sulfonates on the electrokinetic and wetting behavior of alumina. Application of the Stern-Grahame model of the electrical double layer allows delineation of the various mechanisms contributing to the adsorption phenomena. In the case of the aluminasulfonate system the adsorption process is purely physical, viz. electrostatic and hydrocarbon chain-chain interactions, while for the AgI-sulfonate system both physical and chemical processes are involved, viz. electrostatic, hydrocarbon chain-solid, chain-chain, and solid-polar head interactions

Inorganic Water Repellent Coatings for Thermal Protection Insulation on an Aerospace Vehicle

The objective of this research was two-fold: first, to identify and test inorganic water-repellent materials that would be hydrophobic even after thermal cycling to temperatures above 600 C and, second, to develop a model that would link hydrophobicity of a material to the chemical properties of its constituent atoms. Four different materials were selected for detailed experimental study, namely, boron nitride, talc, molybdenite, and pyrophyllite, all of which have a layered structure made up of ionic/covalent bonds within the layers but with van der Waals bonds between the layers. The materials tested could be considered hydrophobic for a nonporous surface but none of the observed contact angles exceeded the necessary 90 degrees required for water repellency of porous materials. Boron nitride and talc were observed to retain their water-repellency when heated in air to temperatures that did not exceed 800 C, and molybdenite was found to be retain its hydrophobicity when heated to temperatures up to 600 C. For these three materials, oxidation and decomposition were identified to be the main cause for the breakdown of water repellency after repeated thermal cycling. Pyrophyllite shows the maximum promise as a potential water-repellent inorganic material, which, when treated initially at 900 C, retained its shape and remained hydrophobic for two thermal cycles where the maximum retreatment temperature is 900 C. A model was developed for predicting materials that might exhibit hydrophobicity by linking two chemical properties, namely, that the constituent ions of the compound belong to the soft acid-base category and that the fractional ionic character of the bonds be less than about 20 percent

Neutron reflection study of the adsorption of the phosphate surfactant NaDEHP onto alumina from water.

The adsorption of a phosphorus analogue of the surfactant AOT, sodium bis(2-ethylhexyl) phosphate (NaDEHP), at the water/alumina interface is described. The material is found to adsorb as an essentially water-free bilayer from neutron reflection measurements. This is similar to the behavior of AOT under comparable conditions, although AOT forms a thicker, more hydrated layer. The NaDEHP shows rather little variation with added salt, but a small thickening of the layer on increasing the pH, in contrast to the behavior of AOT.We thank BP plc and EPSRC for financial support for this work as well as the ISIS and ILL staff and scientists for the allocation of beam time and technical assistance with NR measurements. We also appreciate Chris Sporikou at Department of Chemistry, University of Cambridge, for help with the surfactant synthesis.This is the final version of the article. It first appeared at http://dx.doi.org/10.1021/la504837