ICRF wave field measurements in the presence of scrape off layer turbulence on the ASDEX Upgrade tokamak (invited)

A new array of B-dot probes was installed on ASDEX Upgrade. The purpose of the new diagnostic is to study Ion Cyclotron Range-off Frequencies (ICRF) wave field distributions in the evanescent scrape-off layer (SOL) plasma region on the low field side of ASDEX Upgrade. The vacuum measurements (no gas, B-T = 0 T) reveal ICRF wave field measurements consistent with the profiles expected from the newly installed 3-strap ICRF antennas outside the antenna box: the shape of the toroidal distribution of both the amplitude and the phase is the same for the case of only the central straps being active, as for the case of only the side straps being active. These profiles become strongly modified during plasma operations. The modifications can be separated into two types: " Inter-edge localized mode (ELM)" and " During-ELM" periods. The phase distribution of the ICRF wave fields remains well-defined during the Inter-ELM period; however, it becomes more spread out over the entire 360. range during ELMs. The observed modulations cannot be explained by the observed changes in the ICRF power, as monitored in the transmission line. However, they are consistent with ICRF coupling changes introduced by plasma filaments: the plasma density perturbations due to the filaments are high enough to change the nature of the fast ICRF wave field from evanescent to propagating. The coverage of the present diagnostic is being expanded to include both the low field side and the high field side probes. Additionally, a manipulator probe head is being developed to measure ICRF wave field radial profiles across the SOL region. Published by AIP Publishing

A multichannel reflectometer for edge density profile measurements at the ICRF antenna in ASDEX upgrade

A multichannel reflectometer will be built for the new three-straps ICRF antenna of ASDEX Upgrade (AUG), to study the density behavior in front of it. Ten different accesses to the plasma are available for the three reflectometer channels that can be interchanged without breaking the machine vacuum. Frequency is scanned from 40 GHz to 68 GHz, in 10 mu s, which corresponds to a cut-off density ranging from 10(18) divided by 10(19)m(-3) in the Right cut-off of the X-mode propagation, for standard toroidal magnetic field values of AUG

Implementation of the new multichannel X-mode edge density profile reflectometer for the ICRF antenna on ASDEX Upgrade

A new multichannel frequency modulated continuous-wave reflectometry diagnostic has been successfully installed and commissioned on ASDEX Upgrade to measure the plasma edge electron density profile evolution in front of the Ion Cyclotron Range of Frequencies (ICRF) antenna. The design of the new three-strap ICRF antenna integrates ten pairs (sending and receiving) of microwave reflectometry antennas. The multichannel reflectometer can use three of these to measure the edge electron density profiles up to 2 x 10(19) m(-3), at different poloidal locations, allowing the direct study of the local plasma layers in front of the ICRF antenna. ICRF power coupling, operational effects, and poloidal variations of the plasma density profile can be consistently studied for the first time. In this work the diagnostic hardware architecture is described and the obtained density profile measurements were used to track outer radial plasma position and plasma shape

Arc Detection With GUIDAR: First Experimental Tests On MXP Testbed

The GUIDAR technology has been proposed for the detection of electric arcs in the transmission lines for antennas for plasma heating and current drive. After a preliminary study to assess the feasibility of this technique, some experimental tests with real arcs were conducted on the MXP testbed installed at IPP, Garching. The low frequency (25MHz) GUIDAR signal, made of a sequence of short phase-modulated impulses, is up-shifted to around 400MHz and injected into the transmission line by mean of a directional coupler. The echoes are then extracted with another directional coupler and down-shifted again for the processing. The analysis is performed at a pulse repetition frequency of 120-165kHz, enabling an arc detection within 6-8μs. Tests have shown encouraging results to demonstrate the capability of the GUIDAR system to easily detect both high voltage and, most important, low voltage arcs. The possibility of locating the arcs has also been addressed in the testbed with simulated arcs. The insensitivity of the method to slow changes of the line voltage standing wave ratio (mimicking antenna load variations) was also tested. © 2011 American Institute of Physic