SSME main combustion chamber life prediction

Typically, low cycle fatigue life is a function of the cyclic strain range, the material properties, and the operating temperature. The reusable life is normally defined by the number of strain cycles that can be accrued before severe material degradation occurs. Reusable life is normally signified by the initiation or propagation of surface cracks. Hot-fire testing of channel wall combustors has shown significant mid-channel wall thinning or deformation during accrued cyclic testing. This phenomenon is termed cyclic-creep and appears to be significantly accelerated at elevated surface temperatures. This failure mode was analytically modelled. The cyclic life of the baseline SSME-MCC based on measured calorimeter heat transfer data, and the life sensitivity of local hot spots caused by injector effects were determined. Four life enhanced designs were assessed

Torque required to twist and cut loose Scots pine stumps

Stump wood is a possible source of renewable energy, but before its potential as a fuel can be utilised to a high degree, new harvesting techniques should be developed to reduce the environmental impact (notably ground disturbance) of harvesting stumps. The forces required to lift and drag stumps out of the soil are known. In this study, two unknown and important parameters were addressed: the torque required to uproot stumps by twisting them and the torque required to cut lateral roots around stumps. A new, improved stump-twisting rig was designed and used in trials with 28 Scots pine (Pinus sylvestris) trees (breast-height diameter over bark, 153–427 mm). The measured torque requirements ranged from 10 to 50 kNm. Twisting stumps required more torque than cutting lateral roots around stumps and the required torque increased with increases in stump size. The results indicate that a wrist on a big feller-buncher, but not a conventional rotator used on forest machines, should be able to generate sufficient torque to cut the roots around stumps such as those used in this study

Microdialysis and proteomics of subcutaneous interstitial fluid reveals increased galectin-1 in type 2 diabetes patients

To identify a potential therapeutic target for type 2 diabetes by comparing the subcutaneous interstitial fluid from type 2 diabetes patients and healthy men

Venous thromboembolism in Asia and worldwide: Emerging insights from GARFIELD-VTE

Background: Although epidemiological studies report a lower risk of venous thromboembolism (VTE) than in the Western world, VTE rates in Asia may be underestimated. Furthermore, it is uncertain whether VTE outcomes differ in Asia and the rest of the world (ROW). Methods: GARFIELD-VTE is a global, prospective, non-interventional study of real-world treatment practices. In this study, we compared baseline characteristics, treatment patterns, and 12-month outcomes in Asia and ROW. Results: Of the 10,684 enrolled patients, 1822 (17.1%) were Asian (China n = 420, Hong Kong n = 98, Japan n = 148, Malaysia n = 244, South Korea n = 343, Taiwan n = 232, Thailand n = 337). Compared with ROW patients, those from Asia were more often female (57.4% vs. 48.0%), non-smokers (74.0% vs. 58.9%) and had a lower BMI (24.8 kg/m2 vs. 29.1 kg/m2). Asian patients were more likely to be managed in the hospital (86.9% vs. 70.4%) and to have active cancer (19.8% vs. 8.1%) or a history of cancer (19.1% vs. 12.0%). Asian patients received no anticoagulation more frequently than ROW patients (6.5% vs. 2.1%). Over 12-months follow-up, the rate of all-cause mortality (per 100 person-years [95% confidence interval]) was higher in Asians (15.2 [13.4\u201317.3] vs. 5.9 [5.4\u20136.5]). Adjusted hazard ratios indicated a higher risk of all-cause mortality in Asian patients than the ROW (1.32 [1.08\u20131.62]). The frequencies of major bleeding and recurrent VTE were similar. Conclusion: Asian patients have different risk profiles, treatment patterns and a higher risk of mortality compared with the ROW