Association between Resistin Levels and All-Cause and Cardiovascular Mortality: A New Study and a Systematic Review and Meta-Analysis.

CONTEXT: Studies concerning the association between circulating resistin and mortality risk have reported, so far, conflicting results. OBJECTIVE: To investigate the association between resistin and both all-cause and cardiovascular (CV) mortality risk by 1) analyzing data from the Gargano Heart Study (GHS) prospective design (n=359 patients; 81 and 58 all-cause and CV deaths, respectively); 2) performing meta-analyses of all published studies addressing the above mentioned associations. DATA SOURCE AND STUDY SELECTION: MEDLINE and Web of Science search of studies reporting hazard ratios (HR) of circulating resistin for all-cause or CV mortality. DATA EXTRACTION: Performed independently by two investigators, using a standardized data extraction sheet. DATA SYNTHESIS: In GHS, adjusted HRs per one standard deviation (SD) increment in resistin concentration were 1.28 (95% CI: 1.07-1.54) and 1.32 (95% CI: 1.06-1.64) for all-cause and CV mortality, respectively. The meta-analyses included 7 studies (n=4016; 961 events) for all-cause mortality and 6 studies (n=4,187: 412 events) for CV mortality. Pooled HRs per one SD increment in resistin levels were 1.21 (95% CI: 1.03-1.42, Q-test p for heterogeneity<0.001) and 1.05 (95% CI: 1.01-1.10, Q-test p for heterogeneity=0.199) for all-cause and CV mortality, respectively. At meta-regression analyses, study mean age explained 9.9% of all-cause mortality studies heterogeneity. After adjusting for age, HR for all-cause mortality was 1.24 (95% CI: 1.06-1.45). CONCLUSIONS: Our results provide evidence for an association between circulating resistin and mortality risk among high-risk patients as are those with diabetes and coronary artery disease

Haplotype Structure of the ENPP1 Gene and Nominal Association of the K121Q Missense Single Nucleotide Polymorphism With Glycemic Traits in the Framingham Heart Study

OBJECTIVE—A recent meta-analysis demonstrated a nominal association of the ectonucleotide pyrophosphatase phosphodiesterase 1 (ENPP1) K→Q missense single nucleotide polymorphism (SNP) at position 121 with type 2 diabetes. We set out to confirm the association of ENPP1 K121Q with hyperglycemia, expand this association to insulin resistance traits, and determine whether the association stems from K121Q or another variant in linkage disequilibrium with it

ENPP1 Affects Insulin Action and Secretion: Evidences from In Vitro Studies

The aim of this study was to deeper investigate the mechanisms through which ENPP1, a negative modulator of insulin receptor (IR) activation, plays a role on insulin signaling, insulin secretion and eventually glucose metabolism. ENPP1 cDNA (carrying either K121 or Q121 variant) was transfected in HepG2 liver-, L6 skeletal muscle- and INS1E beta-cells. Insulin-induced IR-autophosphorylation (HepG2, L6, INS1E), Akt-Ser473, ERK1/2-Thr202/Tyr204 and GSK3-beta Ser9 phosphorylation (HepG2, L6), PEPCK mRNA levels (HepG2) and 2-deoxy-D-glucose uptake (L6) was studied. GLUT 4 mRNA (L6), insulin secretion and caspase-3 activation (INS1E) were also investigated. Insulin-induced IR-autophosphorylation was decreased in HepG2-K, L6-K, INS1E-K (20%, 52% and 11% reduction vs. untransfected cells) and twice as much in HepG2-Q, L6-Q, INS1E-Q (44%, 92% and 30%). Similar data were obtained with Akt-Ser473, ERK1/2-Thr202/Tyr204 and GSK3-beta Ser9 in HepG2 and L6. Insulin-induced reduction of PEPCK mRNA was progressively lower in untransfected, HepG2-K and HepG2-Q cells (65%, 54%, 23%). Insulin-induced glucose uptake in untransfected L6 (60% increase over basal), was totally abolished in L6-K and L6-Q cells. GLUT 4 mRNA was slightly reduced in L6-K and twice as much in L6-Q (13% and 25% reduction vs. untransfected cells). Glucose-induced insulin secretion was 60% reduced in INS1E-K and almost abolished in INS1E-Q. Serum deficiency activated caspase-3 by two, three and four folds in untransfected INS1E, INS1E-K and INS1E-Q. Glyburide-induced insulin secretion was reduced by 50% in isolated human islets from homozygous QQ donors as compared to those from KK and KQ individuals. Our data clearly indicate that ENPP1, especially when the Q121 variant is operating, affects insulin signaling and glucose metabolism in skeletal muscle- and liver-cells and both function and survival of insulin secreting beta-cells, thus representing a strong pathogenic factor predisposing to insulin resistance, defective insulin secretion and glucose metabolism abnormalities

Advance in the conceptual design of the European DEMO magnet system

The European DEMO, i.e. the demonstration fusion power plant designed in the framework of the Roadmap to Fusion Electricity by the EUROfusion Consortium, is approaching the end of the pre-conceptual design phase, to be accomplished with a Gate Review in 2020, in which all DEMO subsystems will be reviewed by panels of independent experts. The latest 2018 DEMO baseline has major and minor radius of 9.1 m and 2.9 m, plasma current 17.9 MA, toroidal field on the plasma axis 5.2 T, and the peak field in the toroidal-field (TF) conductor 12.0 T. The 900 ton heavy TF coil is prepared in four lowerature-superconductor (LTS) variants, some of them differing slightly, other significantly, from the ITER TF coil design. Two variants of the CS coils are investigated - a purely LTS one resembling the ITER CS, and a hybrid coil, in which the innermost layers made of HTS allow the designers either to increase the magnetic flux, and thus the duration of the fusion pulse, or to reduce the outer radius of the CS coil. An issue presently investigated by mechanical analyzes is the fatigue load. Two variants of the poloidal field coils are being investigated. The magnet and conductor design studies are accompanied by the experimental tests on both LTS and HTS prototype samples, covering a broad range of DC and AC tests. Testing of quench behavior of the 15 kA HTS cables, with size and layout relevant for the fusion magnets and cooled by forced flow helium, is in preparation.</p

Secular Trends in the Prevalence of Overweight and Obesity in Sicilian Schoolchildren Aged 11–13 Years During the Last Decade

The present study evaluates trends in the prevalence of overweight and obesity in relation to gender and area of residence between two cohorts of students aged 11–13 years in Sicily. The analysis was performed on 1,839 schoolchildren, with 924 and 915 children being studied in 1999–2001 and 2009–2010, respectively. The children who were enrolled during 2009–2010 had significantly higher body mass indexes (BMI), BMI z-scores, and waist circumferences than the children who were studied during 1999–2001 (p<0.0001 for all); these differences was also observed when the cohort was subdivided according to gender or residence area The prevalence of obesity increased significantly from 7.9% in 1999–2001 to 13.7% in 2009–2010 (p<0.0001), whereas thinness decreased significantly from 10.1% to 2.3% (p<0.0001) in the same periods. The increase of trends in the prevalence of obesity was significantly higher in males (9.7% vs. 17.6%, p = 0.0006) than in females (6.3% vs. 9.8%, p = 0.04) and was slightly higher in urban areas (8.8% vs. 14.3%, p = 0.002) than in rural areas (7.8% vs. 13.0%, p = 0.012). The male gender was associated with a higher risk of being overweight or obese (odds ratio: 1.63; 95% confidence intervals: 1.24–2.15; p = 0.0005) in 2009–2010 than in 1999–2001, after adjusting for age and the residence area. In conclusion, this study showed an increasing trend in the prevalence of overweight and obesity in Sicilian schoolchildren during the last decade and that this trend was related to gender, age and the area of residence. More specifically, our data indicated that the prevalence of obesity increased by 5.8%, the prevalence of thinness decreased by 7.8% and the prevalence of normal-weight children did not change over the course of a decade. These results suggest a shift in the body weights of Sicilian children toward the upper percentiles

The DEMO magnet system – Status and future challenges

We present the pre-concept design of the European DEMO Magnet System, which has successfully passed the DEMO plant-level gate review in 2020. The main design input parameters originate from the so-called DEMO 2018 baseline, which was produced using the PROCESS systems code. It defines a major and minor radius of 9.1 m and 2.9 m, respectively, an on-axis magnetic field of 5.3 T resulting in a peak field on the toroidal field (TF) conductor of 12.0 T. Four variants, all based on low-temperature superconductors (LTS), have been designed for the 16 TF coils. Two of these concepts were selected to be further pursued during the Concept Design Phase (CDP): the first having many similarities to the ITER TF coil concept and the second being the most innovative one, based on react-and-wind (RW) Nb3Sn technology and winding the coils in layers. Two variants for the five Central Solenoid (CS) modules have been investigated: an LTS-only concept resembling to the ITER CS and a hybrid configuration, in which the innermost layers are made of high-temperature superconductors (HTS), which allows either to increase the magnetic flux or to reduce the outer radius of the CS coil. Issues related to fatigue lifetime which emerged in mechanical analyses will be addressed further in the CDP. Both variants proposed for the six poloidal field coils present a lower level of risk for future development. All magnet and conductor design studies included thermal-hydraulic and mechanical analyses, and were accompanied by experimental tests on both LTS and HTS prototype samples (i.e. DC and AC measurements, stability tests, quench evolution etc.). In addition, magnet structures and auxiliary systems, e.g. cryogenics and feeders, were designed at pre-concept level. Important lessons learnt during this first phase of the project were fed into the planning of the CDP. Key aspects to be addressed concern the demonstration and validation of critical technologies (e.g. industrial manufacturing of RW Nb3Sn and HTS long conductors, insulation of penetrations and joints), as well as the detailed design of the overall Magnet System and mechanical structures