22 research outputs found
Numerical modeling of capillary electrophoresis : electrospray mass spectrometry interface design
Capillary electrophoresis hyphenated with electrospray mass spectrometry (CE-ESI-MS) has emerged in the past decade as one of the most powerful bioanalytical techniques. As the sensitivity and efficiency of new CE-ESI-MS interface designs are continuously improving, numerical modeling can play important role during their development. In this review, different aspects of computer modeling and simulation of CE-ESI-MS interfaces are comprehensively discussed. Relevant essentials of hydrodynamics as well as state-of-the-art modeling techniques are critically evaluated. Sheath liquid-, sheathless-, and liquid-junction interfaces are reviewed from the viewpoint of multidisciplinary numerical modeling along with details of single and multiphase models together with electric field mediated flows, electrohydrodynamics, and free fluid-surface methods. Practical examples are given to help non-specialists to understand the basic principles and applications. Finally, alternative approaches like air amplifiers are also included
Oriented immobilization of peptide-N-glycosidase F on a monolithic support for glycosylation analysis
In this paper, we report on a novel oriented peptide-N-glycosidase F (PNGase F) immobilization approach onto methacrylate based monolithic support for rapid, reproducible and efficient release of the N-linked carbohydrate moieties from glycoproteins. The glutathione-S-transferase-fusion PNGase F (PNGase F-GST) was expressed in Escherichia coli using regular vector technology. The monolithic pore surface was functionalized with glutathione via a succinimidyl-6-(iodoacetyl-amino)-hexanoate linker and the specific affinity of GST toward glutathione was utilized for the oriented coupling. This novel immobilization procedure was compared with reductive amination technique commonly used for non-oriented enzyme immobilization via primary amine functionalities. Both coupling approaches were compared using enzymatic treatment of several glycoproteins, such as ribonuclease B, fetuin and immunoglobulin G followed by MALDI/MS and CE-LIF analysis of the released glycans. Orientedly immobilized PNGase F via GST-glutathione coupling showed significantly higher activity, remained stable for several months, and allowed rapid release of various types of glycans (high-mannose, core fucosylated, sialylated, etc.) from glycoproteins. Complete protein deglycosylation was obtained as fast as in several seconds when using flow-through immobilized microreactors
Open source capillary electrophoresis
Open source paradigm is becoming widely accepted in scientific communities and open source hardware is finding its steady place in chemistry research. In this review article, we provide the reader with the most up-to-date information on open source hardware and software resources enabling the construction and utilization of an "open source capillary electrophoresis instrument". While CE is still underused as a separation technique, it offers unique flexibility, low-cost, and high efficiency and is particularly suitable for open source instrumental development. We overview the major parts of CE instruments, such as high voltage power supplies, detectors, data acquisition systems, and CE software resources with emphasis on availability of the open source information on the web and in the scientific literature. This review is the first of its kind, revealing accessible blueprints of most parts from which a fully functional open source CE system can be built. By collecting the extensive information on open source capillary electrophoresis in this review article, the authors aim at facilitating the dissemination of knowledge on CE within and outside the scientific community, fosters innovation and inspire other researchers to improve the shared CE blueprints
Fluorescence Detector for Capillary Separations Fabricated by 3D Printing
A simple inexpensive light-emitting
diode (LED)-based fluorescence
detector for detection in capillary separations is described. The
modular design includes a separate high power LED source, detector
head, designed in the epifluorescence arrangement, and capillary detection
cells. The detector head and detection cells were printed using a
3D printer and assembled with commercially available optical components.
Optical fibers were used for connecting the detector head to the LED
excitation source and the photodetector module. Microscope objective
or high numerical aperture optical fiber were used for collection
of the fluorescence emission from the fused silica separation capillary.
As an example, mixture of oligosaccharides labeled by 8-aminopyrene-1,3,6-trisulfonate
(APTS) was separated by capillary zone electrophoresis and detected
by the described detector. The performance of the detector was compared
with both a semiconductor photodiode and photomultiplier as light
sensing elements. The main advantages of the 3D printed parts, compared
to the more expensive alternatives from the optic component suppliers,
include not only cost reduction, but also easy customization of the
spatial arrangement, modularity, miniaturization, and sharing of information
between laboratories for easy replication or further modifications
of the detector. All information and files necessary for printing
the presented detector are enclosed in the Supporting
Information
Simulation-based design of a microfabricated pneumatic electrospray nebulizer.
A microfabricated pneumatic electrospray nebulizer has been developed and evaluated using computer simulations and experimental measurements of the MS signals. The microdevice under development is designed for electrospray MS interfacing without the need to fabricate an electrospray needle and can be used as a disposable or an integral part of a reusable system. The design of the chip layout was supported by computational fluid dynamics simulations. The tested microdevices were fabricated in glass using conventional photolithography, followed by wet chemical etching and thermal bonding. The performance of the microfabricated nebulizer was evaluated by means of TOF-MS with a peptide mixture. It was demonstrated that the nebulizer, operating at supersonic speed of the nebulizing gas, produced very stable nanospray (900 nL/min) as documented by less than 0.1% (SE) fluctuation in total mass spectrometric signal intensity
A Microdevice with Integrated Liquid Junction for Facile Peptide and Protein Analysis by Capillary Electrophoresis/Electrospray Mass Spectrometry
Jednoduchá výroba metalických magneticky aktivních nanoplíšků pro bioaplikace
This short communication presents a simple method of preparation of thin-metal nano-platelets utilizing metal sputtering and lift-off photolithography. The method offers complete control over size, shape and properties of nano-platelets of sub-micrometer thickness. Platelets with a thickness of 50-200 nm and with defined arbitrary shapes and sizes in the range of 15-300 m were prepared from single or multiple metal layers by magnetron sputtering. Deposition of different metals in layers enabled fabrication of bi- or tri-metallic platelets with a magnetic core and differently composed surfaces. Highly reflective nano-platelets with a magnetic core allowed manipulation by magnetic fields, while different metallic surfaces served for functionalization by selected molecules. Submicron thin nano-platelets are extremely light (e.g., similar to 20 ng for a 100 m x 100 m x 0.1 m gold nano-platelet) so that they can be attached to surfaces by only a few chemical bonds. At the same time their area is sufficiently large for simple optical recognition of their shape which is intended to label various characteristics depending on the specific surface functionalization of the given shape.Tento text popisuje jednoduchou metodu přípravy metalických a magneticky aktivních nanoplíšků a to fotolitografickou technikou. technikou. Metoda umožňuje kontrolovat výstupní parametry nanoplíšků jako jsou velikost, tvar, magnetické vlastnosti
Characterization of a Porous Nano-electrospray Capillary Emitter at Ultra-low Flow Rates
Biopharmaceuticals, especially therapeutic monoclonal antibodies, have emerged as a very promising new generation of protein-based drugs. However, their comprehensive analysis continues to pose new challenges for the bioanalytical field. Hyphenation of capillary electrophoresis with electrospray ionization (CE-MS) is a promising technique to address these challenges. One of the main advantages of CE-MS is the ability to produce stable electrospray at ultra-low flow rates (5–20 nl/min
range). In this short communication we report on the characterization of a porous nanoelectrospray capillary emitter focusing on the effects of ultra-low flow rate on ionization efficiency, ion suppression and detection sensitivity. Ion suppression effect of a poorly-ionizable sugar in the presence of an easily-ionized peptide was reduced by almost 2-fold. Intact therapeutic antibody
infusion analysis demonstrated that MS detection sensitivity increased by an order of magnitude with the decrease of flow rate from 250 nL/min to 20 nL/min using the nano-electrospray capillary emitter
Affiblot: screeningové dot-blot zařízení pro selekci vhodných protilátek
The key factor in the development of antibody-based assays is to find an antibody that has an appropriate affinity, high specificity, and low cross-reactivity. However, this task is not easy to carry out since the research antibodies on the market may suffer from low specificity and reproducibility. Here, we report on a palm-sized dot blot-based device, called the affiblot, that has a specially designed lid that allows simultaneous semi-quantitative comparison of up to five antibodies from different suppliers regarding their affinity/avidity, cross-reactivity, and batch-to-batch reliability. The only required peripheral equipment is a vacuum pump, a camera, and densitometry software. The affiblot device was tested for its functionality and its measurements were compared against those obtained by standard dot blot and ELISA. The benefit over these methods, when various antibodies are evaluated, is in its simplicity. It allows easy antigen deposition, fast application and the discarding of the solutions, a compact undivided membrane, and therefore significant decrease of labor. The device was tested with specific anti-ApoE, anti-EpCAM, anti-Salmonella, anti-E. coli, and anti-Listeria antibodies from different suppliers. Their properties were compared for their ability to interact specifically with antigen and/or non-target structures and the best-suited antibody for the intended application was identified.Klíčovým faktorem ve vývoji testů na bázi protilátek je najít protilátku, která má vhodnou afinitu, vysokou specificitu a nízkou zkříženou reaktivitu. To však není snadné provést, protože výzkumné protilátky na trhu mohou trpět nízkou specificitou a reprodukovatelností. Zde referujeme o zařízení na bázi dot blot velikosti dlaně, zvaném affiblot, které má speciálně navržené víko, které umožňuje simultánní semikvantitativní srovnání až pěti protilátek od různých dodavatelů, pokud jde o jejich afinitu/aviditu, zkříženou reaktivitu, a spolehlivost mezi jednotlivými dávkami