The effect of combined sewer overflow (CSO) on the abundance of antibiotic resistant bacteria in the James River

Antibiotics have been used to treat bacterial infections worldwide since their discovery in the early 20th century and are vital to human health. Unfortunately, the heavy use of antibiotics has led to the increased natural selection of antibiotic resistant bacteria. In urban rivers, the spread of resistance resistance is through through the direct acquisition of resistance genes by either either either cell-to -cell contact or DNA uptake via a process called horizontal gene transfer transfer(HGT) 2.HGT, resistance genes, and resistant bacteria are in greater abundance in wastewater systems, and are released into the environment in wastewater plant effluent2,3. One problematic method of wastewater treatment, used in over over 750 cities in the US, is the Combined Sewer System System(CSS) 4.This collects the water from both rainfall and sewage for treatment at a single facility.Occasionally when it rains, the treatment plant exceeds capacity and the combined untreated effluent enters the river in what is called a CSO (Combined Sewer Overflow) event. Some studies have found that antibiotic resistance genes can be more abundant in river water water affected by wastewater treatment effluent and correlated with CSO events events 7

V/STOL maneuverability and control

Maneuverability and control of V/STOL aircraft in powered-lift flight is studied with specific considerations of maneuvering in forward flight. A review of maneuverability for representative operational mission tasks is presented and covers takeoff, transition, hover, and landing flight phases. Maneuverability is described in terms of the ability to rotate and translate the aircraft and is specified in terms of angular and translational accelerations imposed on the aircraft. Characteristics of representative configurations are reviewed, including experience from past programs and expectations for future designs. The review of control covers the characteristics inherent in the basic airframe and propulsion system and the behavior associated with ontrol augmentation systems. Demands for augmented stability and control response to meet certain mission operational requirements are discussed. Experience from ground-based simulation and flight experiments that illustrates the impact of augmented stability and control on aircraft design is related by example

Modelled and measured strain in mascon basins on the moon

The close association of wrinkle ridges and grabens with mascon basins on the Moon has suggested that the responsible compression and extension resulted from basin subsidence and peripheral flexing of the lithosphere. The distribution of grabens and wrinkle ridges associated with mascon basins has been further used along with elastic plate bending models to constrain the thickness of the lithosphere at the time of their formation. Kinematic models for basin subsidence have also been developed and compared with strains inferred from grabens and wrinkle ridges. Note that kinematic models may be preferable to dynamic models because the strain associated with tectonic features can be compared directly with model predictions and because fewer assumptions are required for their calculations, such as perfect elasticity and specific values of the elastic moduli. Also, if the results from kinematic models compare favorably with the strain estimated across the tectonic features on the Moon, then a global strain field may not be necessary. Herein, the strain inferred for wrinkle ridges and grabens was compared to that calculated from a simple kinematic subsidence model for mascon basins on the Moon

Physiographic constraints on the origin of lunar wrinkle ridges

Wrinkle ridges are linear asymmetric topographic highs with considerable morphologic complexity that are commonly found on the lunar maria and the smooth plains of Mars and Mercury. The origin of planetary wrinkle ridges has been a much argued and debated topic. Early ideas suggested that wrinkle ridges resulted from volcanic intrusion and extrusion of high viscosity lavas; these early ideas were countered with suggestions that wrinkle ridges formed from tectonic processes involving folding and faulting. Combined volcanic and tectonic mechanisms have also been suggested. The identification and analysis of a number of morphologically similar structures on the earth has helped in the recent interpretation of wrinkle ridges as thrust faults that deform surface rocks. Nevertheless, there remains the uncertainty of the dominant role of thrusting versus folding in the formation of planetary wrinkle ridges. Presented is a detailed physiographic analysis of lunar wrinkle ridges in an effort to help distinguish the dominant deformation mechanism. Results agree with the findings of the earth analog study and support the hypothesis that wrinkle ridges form from thrust faults that deform surface rocks

Effect of Tidal Cycling Rate on the Distribution and Abundance of Nitrogen-Oxidizing Bacteria in a Bench-Scale Fill-and-Drain Bioreactor

Most domestic wastewater can be effectively treated for secondary uses by engineered biological systems. These systems rely on microbial activity to reduce nitrogen (N) content of the reclaimed water. Such systems often employ a tidal-flow process to minimize space requirements for the coupling of aerobic and anaerobic metabolic processes. In this study, laboratory-scale tidal-flow treatment systems were studied to determine how the frequency and duration of tidal cycling may impact reactor performance. Fluorescent in situ hybridization and epifluorescence microscopy were used to enumerate the key functional groups of bacteria responsible for nitrification and anaerobic ammonium oxidation (anammox), and N-removal efficiency was calculated via a mass-balance approach. When water was cycled (i.e., reactors were filled and drained) at high frequencies (16–24 cycles day−1), nitrate accumulated in the columns—presumably due to inadequate periods of anoxia that limited denitrification. At lower frequencies, such as 4 cycles day−1, nearly complete N removal was achieved (80–90%). These fill-and-drain systems enriched heavily for nitrifiers, with relatively few anammox-capable organisms. The microbial community produced was robust, surviving well through short (up to 3 h) anaerobic periods and frequent system-wide perturbation

An LED pulser for measuring photomultiplier linearity

A light-emitting diode (LED) pulser for testing the low-rate response of a photomultiplier tube (PMT) to scintillator-like pulses has been designed, developed, and implemented. This pulser is intended to simulate 80 ns full width at half maximum photon pulses over the dynamic range of the PMT, in order to precisely determine PMT linearity. This particular design has the advantage that, unlike many LED test rigs, it does not require the use of multiple calibrated LEDs, making it insensitive to LED gain drifts. Instead, a finite-difference measurement is made using two LEDs which need not be calibrated with respect to one another. These measurements give a better than 1% mapping of the response function, allowing for the testing and development of particularly linear PMT bases.Comment: 5 pages, 5 figure

Estimating Tropical Forest Structure Using a Terrestrial Lidar

Forest structure comprises numerous quantifiable biometric components and characteristics, which include tree geometry and stand architecture. These structural components are important in the understanding of the past and future trajectories of these biomes. Tropical forests are often considered the most structurally complex and yet least understood of forested ecosystems. New technologies have provided novel avenues for quantifying biometric properties of forested ecosystems, one of which is LIght Detection And Ranging (lidar). This sensor can be deployed on satellite, aircraft, unmanned aerial vehicles, and terrestrial platforms. In this study we examined the efficacy of a terrestrial lidar scanner (TLS) system in a tropical forest to estimate forest structure. Our study was conducted in January 2012 at La Selva, Costa Rica at twenty locations in a predominantly undisturbed forest. At these locations we collected field measured biometric attributes using a variable plot design. We also collected TLS data from the center of each plot. Using this data we developed relative vegetation profiles (RVPs) and calculated a series of parameters including entropy, Fast Fourier Transform (FFT), number of layers and plant area index to develop statistical relationships with field data.We developed statistical models using a series of multiple linear regressions, all of which converged on significant relationships with the strongest relationship being for mean crown depth (r2 = 0.88, p \u3c 0.001, RMSE = 1.04 m). Tree density was found to have the poorest significant relationship (r2 = 0.50, p \u3c 0.01, RMSE = 153.28 n ha-1). We found a significant relationship between basal area and lidar metrics (r2 = 0.75, p \u3c 0.001, RMSE = 3.76 number ha-1). Parameters selected in our models varied, thus indicating the potential relevance of multiple features in canopy profiles and geometry that are related to field-measured structure. Models for biomass estimation included structural canopy variables in addition to height metrics. Our work indicates that vegetation profiles from TLS data can provide useful information on forest structure

A review of the population structure of yellowfin tuna, Thunnus albacares, in the Eastern Pacific Ocean

ENGLISH: Since its inception in 1950 by agreement between the Republic of Costa Rica and the United States of America, the Inter-American Tropical Tuna Commission has been engaged in studies of the biology, ecology and population dynamics of yellowfin tuna in the eastern Pacific Ocean. Prime consideration has been given to the evaluation of the effects of fishing pressure on the yellowfin tuna in this area in order to estimate the maximum sustainable yield. A portion of the eastern Pacific has been defined by the Inter-American Tropical Tuna Commission (1963) as a regulatory area for yellowfin tuna (Figure 1). SPANISH: Desde su incepción en 1950, por un acuerdo entre la República de Costa Rica y los Estados Unidos de América, la Comisión Interamericana del Atún Tropical ha estado ocupada en los estudios de la biología, ecología y dinámica de las poblaciones del atún aleta amarilla en el Océano Pacífico Oriental. Se consideró primariamente la evaluación de los efectos de la presión de la pesquería sobre el atún aleta amarilla en esta área, para poder estimar el rendimiento máximo sostenible. Una parte del Pacífico Oriental ha sido definida por la Comisión Interamericana del Atún Tropical (1963), como área de reglamentación del atún aleta amarilla (Figura 1). (PDF contains 60 pages.

Neurals Networks for Projecting Named Entities from English to Ewondo

Named entity recognition is an important task in natural language processing. It is very well studied for rich language, but still under explored for low-resource languages. The main reason is that the existing techniques required a lot of annotated data to reach good performance. Recently, a new distributional representation of words has been proposed to project named entities from a rich language to a low-resource one. This representation has been coupled to a neural network in order to project named entities from English to Ewondo, a Bantu language spoken in Cameroon. Although the proposed method reached appreciable results, the size of the used neural network was too large compared to the size of the dataset. Furthermore the impact of the model parameters has not been studied. In this paper, we show experimentally that the same results can be obtained using a smaller neural network. We also emphasize the parameters that are highly correlated to the network performance. This work is a step forward to build a reliable and robust network architecture for named entity projection in low resource languages

Digital System Design Automation

Contains report on one research project.Joint Services Electronics Programs (U. S. Army, U.S. Navy, and U.S. Air Force) under Contract DA 28-043-AMC-02536(E