Modelling of imbibition process in an embankment scale model

This paper aims to investigate the hydro-mechanical behaviour of a loosely compacted embankment during an inundation event. This study is based on the results of a centrifuge test carried out on a small-scale embankment model made of an artificially compacted clay–sand mixture. The wetting-induced displacements are analyzed and interpreted by means of a constitutive model adapted to unsaturated conditions. The numerical predictions are presented in terms of time evolutions of settlements, as well as, spatial distributions of vertical displacements. These profiles are compared to those experimentally observed in order to validate the predictive capabilities of the model on a boundary value problem. Moreover, the stress paths followed by elementary soil elements located at different depths are analyzed to emphasize the stress and strain variations due to capillary rise

The Hydromechanical Interplay in the Simplified Three-dimensional Limit Equilibrium Analyses of Unsaturated Slope Stability

This paper presents a three-dimensional slope stability limit equilibrium solution for translational planar failure modes. The proposed solution uses Bishop's average skeleton stress combined with the Mohr-Coulomb failure criterion to describe soil strength evolution under unsaturated conditions while its formulation ensures a natural and smooth transition from the unsaturated to the saturated regime and vice versa. The proposed analytical solution is evaluated by comparing its predictions with the results of the Ruedlingen slope failure experiment. The comparison suggests that, despite its relative simplicity, the analytical solution can capture the experimentally observed behaviour well and highlights the importance of considering lateral resistance together with a realistic interplay between mechanical parameters (cohesion) and hydraulic (pore water pressure) conditions

Triaxial tests on frozen ground: formulation and modelling

Artificial Ground Freezing (AGF) is a controllable process that can be used by engineers to stabilise temporarily the ground, provide structural support and/or exclude groundwater from an excavation until construction of the final lining provides permanent stability and water tightness. In this work, the process of ground freezing is studied using a constitutive model that encompasses frozen and unfrozen behaviour within a unified effective-stress-based framework and employs a combination of ice pressure, liquid water pressure and total stress as state variables. The parameters of the constitutive model are calibrated against experimental data obtained from samples retrieved during construction of Napoli underground, in which AGF was extensively used to excavate in granular soils and weak fractured rock below the ground water table

A laboratory investigation on an undisturbed silty sand from a slope prone to landsliding

A laboratory investigation is presented for undisturbed samples of a silty sand under saturated conditions. The soil was sampled from test pits south of Rüdlingen in North-East Switzerland, where a landslide triggering experiment was carried out on a steep forest slope. The aim of the work was to characterise the behaviour of the soil in triaxial tests, in the light of the possible failure mechanisms of the slope. Conventional drained and undrained triaxial tests were conducted to detect critical state conditions as well as peak shear strength as a function of confining pressure. Soil specimens were also exposed to stress paths simulating in situ water pressure increase to study the stress-strain response and to enhance the ability to predict failure conditions more accurately in the future. Possible unstable response along the stress paths analysed was investigated by means of second order work and strain acceleration. The results show that temporary unstable conditions may be encountered for this soil at stress ratios below ultimate failure and even below critical state line, depending on void ratio, drainage conditions and time dependent compressibility. A modified state parameter is explored as a potentially useful tool to discriminate conditions leading to eventual collaps

Consequences on water retention properties of double-porosity features in a compacted silt

The paper deals with an experimental investigation aimed at studying microstructural features and their consequences on water retention properties of statically compacted unsaturated silt. The evolution of the microstructure of the aggregate fabric induced by compaction is investigated by studying the pore size distribution changes under different initial conditions (void ratio and water content). The material used is low plasticity silt from Jossigny near Paris, France. A series of mercury intrusion porosimetry tests (MIP) were performed at different void ratios and water contents to provide microstructural information. The arrangement of aggregation/particles and pore network was also investigated with environmental scanning electron microscopy (ESEM). The MIP data were used to determine the water retention curve on drying for the specific pore network configuration induced on compaction. The MIP data were used to formulate and calibrate a multimodal water retention model for a specific pore network configuration, which is obtained by linear superposition of subcurves of a modified van Genuchten type. The study is then complemented with controlled suction oedometer tests on compacted samples to obtain the water retention properties of the material at two different void ratios. Finally, we compare the water retention properties obtained by the simulated progression of the different pore network configurations induced on the hydraulic path with the water retention properties under suction-controlled conditions. Good agreement between the two methods for the drying path is reache

Hydro-mechanical analysis of a surficial landslide triggered by artificial rainfall: the Ruedlingen field experiment

This paper interprets the hydromechanical behaviour of a steep, forested, instrumented slope during an artificial rainfall event, which triggered a shallow slope failure 15 h after rainfall initiation. The soil's mechanical response has been simulated by coupled hydro-mechanical finite-element analyses, using a critical state constitutive model that has been extended to unsaturated conditions. Failure occurs within a colluvium shallow soil cover, characterised as a silty sand of low plasticity. The hydraulic and mechanical parameters are calibrated, based on an extended set of experimental results, ranging from water retention curve measurements to triaxial stress path tests under both saturated and unsaturated conditions. Rainfall is simulated as a water flux at the soil surface and suitable boundary conditions account for the hydromechanical interaction between the soil cover and the underlying bedrock. The results are compared with field data of the mechanistic and the hydraulic responses up to failure and are found to provide a very satisfactory prediction. The study identifies water exfiltration from bedrock fissures as the main triggering agent, resulting in increased pore pressures along the soil-bedrock interface, reduced available shear strength and cause extensive plastic straining, leading to the formation and propagation of a failure surface.Accepted Author ManuscriptGeo-engineerin

Post-lockdown changes in diet in Italy and the USA: Return to old habits or structural changes?

This study analyses the impacts of the COVID-19 pandemic on food consumption at the end of the first lockdown in the New York State (USA) and in Italy (spring 2020). The results of our study show that important changes occurred in food habits in these two countries, in which lockdown was very similar. Three models of response to the shock of the lockdown were noted in both countries. The first model (40%) includes individuals who largely increased their food consumption, the second model (26%) showed a more virtuous and responsible behaviour, while the third model (34%) displayed no change in food consumption. Diet quality in terms of healthiness and sustainability declined in the USA, while in Italy, approximately one-third of the sample showed an improvement in diet in these same areas. The use of sociodemographic, motivational, and behavioural variables to profile subjects who adhered to each food model has made it possible to obtain information that can be used to develop communication campaigns and policies for a healthier and more sustainable diet

Numerical modelling of the response of an unsaturated silty soil under wetting and gravitational loading processes

This paper presents the results of a numerical study aiming at simulating the response of an unsaturated fine-grained soil under wetting and gravitational loading processes. This study is based on the results of some centrifuge tests carried out to assess the influence of partial saturation on the laterally loaded pile response. The hydro-mechanical behaviour of the silty soil is described using a constitutive model adapted to unsaturated conditions. The model predictions are compared with the measurements provided by LVDTs and laser transducers in the first phases of the experimental study. Besides validating the model, the numerical study aimed at investigating the influence of the after-compaction conditions on both the displacement field and the evolution of the more significant state variables during imbibition and gravitational loading processes. Finally, an additional analysis is conducted to determine the effects of the pile installation on the soil response