Photocatalytic oxidation mechanism of alkanes in contact with titanium dioxide

Isobutane was photooxidized on titanium dioxide between -16 and +180 C in tertiary butanol and acetone. The formation of tertiary butanol preceded the formation of acetone. Above 20 C the latter compound became clearly predominant. The reaction kinetics obeyed a steady state model of oxygen chemisorption with the involvement of isobutane in the physisorbed phase

Using aircraft measurements to determine the refractive index of Saharan dust during the DODO Experiments

Much uncertainty in the value of the imaginary part of the refractive index of mineral dust contributes to uncertainty in the radiative effect of mineral dust in the atmosphere. A synthesis of optical, chemical and physical in-situ aircraft measurements from the DODO experiments during February and August 2006 are used to calculate the refractive index mineral dust encountered over West Africa. Radiative transfer modeling and measurements of broadband shortwave irradiance at a range of altitudes are used to test and validate these calculations for a specific dust event on 23 August 2006 over Mauritania. Two techniques are used to determine the refractive index: firstly a method combining measurements of scattering, absorption, size distributions and Mie code simulations, and secondly a method using composition measured on filter samples to apportion the content of internally mixed quartz, calcite and iron oxide-clay aggregates, where the iron oxide is represented by either hematite or goethite and clay by either illite or kaolinite. The imaginary part of the refractive index at 550 nm (ni550) is found to range between 0.0001 i to 0.0046 i, and where filter samples are available, agreement between methods is found depending on mineral combination assumed. The refractive indices are also found to agree well with AERONET data where comparisons are possible. ni550 is found to vary with dust source, which is investigated with the NAME model for each case. The relationship between both size distribution and ni550 on the accumulation mode single scattering albedo at 550 nm (ω0550) are examined and size distribution is found to have no correlation to ω0550, while ni550 shows a strong linear relationship with ω0550. Radiative transfer modeling was performed with different models (Mie-derived refractive indices, but also filter sampling composition assuming both internal and external mixing). Our calculations indicate that Mie-derived values of ni550 and the externally mixed dust where the iron oxide-clay aggregate corresponds to the goethite-kaolinite combination result in the best agreement with irradiance measurements. The radiative effect of the dust is found to be very sensitive to the mineral combination (and hence refractive index) assumed, and to whether the dust is assumed to be internally or externally mixed

Numerical investigation of non-linear inverse Compton scattering in double-layer targets

Non-linear inverse Compton scattering (NICS) is of significance in laser-plasma physics and for application-relevant laser-driven photon sources. Given this interest, we investigated this synchrotron-like photon emission in a promising configuration achieved when an ultra-intense laser pulse interacts with a double-layer target (DLT). Numerical simulations with two-dimensional particle-in-cell codes and analytical estimates are used for this purpose. The properties of NICS are shown to be governed by the processes characterizing laser interaction with the near-critical and solid layers composing the DLT. In particular, electron acceleration, laser focusing in the low-density layer, and pulse reflection on the solid layer determine the radiated power, the emitted spectrum, and the angular properties of emitted photons. Analytical estimates, supported by simulations, show that quantum effects are relevant at laser intensities as small as similar to 1 0 21 W/cm(2) Target and laser parameters affect the NICS competition with bremsstrahlung and the conversion efficiency and average energy of emitted photons. Therefore, DLT properties could be exploited to tune and enhance photon emission in experiments and future applications

Reduction of nitro compounds using 3d-non-noble metal catalysts

The reduction of nitro compounds to the corresponding amines is one of the most utilized catalytic processes in the fine and bulk chemical industry. The latest development of catalysts with cheap metals like Fe, Co, Ni, and Cu has led to their tremendous achievements over the last years prompting their greater application as "standard" catalysts. In this review, we will comprehensively discuss the use of homogeneous and heterogeneous catalysts based on non-noble 3d-metals for the reduction of nitro compounds using various reductants. The different systems will be revised considering both the catalytic performances and synthetic aspects highlighting also their advantages and disadvantages

Global Breast Cancer: The Lessons to Bring Home

Breast cancer is the most common cancer affecting women globally. This paper discusses the current progress in breast cancer in Western countries and focuses on important differences of this disease in low- and middle-income countries (LMCs). It introduces several arguments for applying caution before globalizing some of the US-adopted practices in the screening and management of the disease. Finally, it suggests that studies of breast cancer in LMCs might offer important insights for a more effective management of the problem both in developing as well as developed countries

Laser-driven production with advanced targets of Copper-64 for medical applications

Radionuclides are of paramount importance in nuclear medicine both for clinical uses and radiopharmaceutical production. Among the others, nuclides suitable for theranostics like Copper-64 are particularly attractive since they can play both a diagnostic and therapeutic role. In the last years, the growing demand for these nuclides stimulated the research of new solutions, along with cyclotrons already in use, for their production. In this respect, a promising alternative is laser-driven proton accelerators based on the interaction of superintense laser pulses with target materials. Because of their potential compactness and flexibility, they are under investigation for several applications ranging from materials science to nuclear medicine. Moreover, the use of advanced Double-Layer targets (DLTs) was identified as a viable route to increase the number and energy of the accelerated protons to satisfy the requirements of demanding applications. In this contribution, we numerically investigate the use of DLT-based laser-driven sources for Copper-64 production. We show that activities relevant to pre-clinical studies can be achieved with an existing 150 TW laser and DLTs. Moreover, we extend the discussion by considering a broad range of laser systems by exploiting a theoretical model. Our results can guide the choice of laser and target parameters for future experimental investigations

Ultra-intense laser interaction with nanostructured near-critical plasmas

Near-critical plasmas irradiated at ultra-high laser intensities (I > 1018W/cm2) allow to improve the performances of laser-driven particle and radiation sources and to explore scenarios of great astrophysical interest. Near-critical plasmas with controlled properties can be obtained with nanostructured low-density materials. By means of 3D Particle-In-Cell simulations, we investigate how realistic nanostructures influence the interaction of an ultra-intense laser with a plasma having a near-critical average electron density. We find that the presence of a nanostructure strongly reduces the effect of pulse polarization and enhances the energy absorbed by the ion population, while generally leading to a significant decrease of the electron temperature with respect to a homogeneous near-critical plasma. We also observe an effect of the nanostructure morphology. These results are relevant both for a fundamental understanding and for the foreseen applications of laser-plasma interaction in the near-critical regime

Nitrogen-Enriched Graphene Iron Oxide Nanoparticles as Innovative Catalysts: First Application to Cyclopropanation Reactions

A new class of catalysts having a metal/metal oxide core surrounded by a few nitrogen-enriched graphene layers (NGR) has recently brought immense attention in research. Until now, NGR catalysts have mostly been employed for hydrogenation reactions. In this work, we expand the field of applicability of NGR catalysts to cyclopropanation reactions. The activity of Fe2O3/NGr@C has been studied by using ethyl diazoacetate and \u3b1-methylstyrene as substrates. Various parameters such as solvents, temperature and time were changed. Fe2O3/NGr@C-catalysts showed best activity in dimethoxyethane at 60 oC, affording high yields of the desired cyclopropanes (mixture of cis and trans isomers) and only 1-2 % of ethyl maleate and fumarate (Figure 1). The catalyst gradually deactivates after each recycle, but we were able to reactivate the recovered catalyst by treating it with dilute H2O2 (1:10 with distilled water). Like \u3b1-methylstyrene, several olefins such as 4-chloro-\u3b1-methyl styrene, 4-methylstyrene, 2- methylstyrene, 3-methylstyrene, 4-chlorostyrene, 4-t-butylstyrene, 1-octene etc. have been tested in order to explore the substrate scope. The corresponding cyclopropanes were obtained in high to excellent isolated yields (84-98%). In all cases trans diastereoselectivity was found, but even the minor cis isomer could be isolated in a pure form

Circuit training during physical education classes to prepare cadets for military academies tests: Analysis of an educational project

Background: The aim of this study was to test the efficacy of an eight-week physical education program based on circuit training to better improve the overall physical and military-specific performance compared to a conventional physical education program in military high school students. Methods: Sixty-four students were enrolled in this study and randomly assigned to an experimental (EG, circuit training) or a control group (CG, traditional physical education program). Immediately before and after the eight-week training period, participants were tested on strength and endurance performance, circuit training tests, and military tests. Moreover, the acquisition of the educational objectives and the pleasantness of the experimental intervention were tested using a qualitative approach. Results: Despite the higher workload in EG than CG during the training period, the effect of the experimental intervention compared to the control was only possibly to likely positive for a few strength and endurance performances and circuit training tests, respectively. A trivial effect was shown in the military tests. On the contrary, the high percentage of motivation (76%), understanding (78%) and collaboration (86%) showed by the students suggests the achievement of acquisition of the educational objectives and a fair pleasantness of the lessons. Conclusions: A lack of clear and marked effect of the experimental intervention could be ascribed to an insufficient exposure time to the training and a high subjective overall workload encountered in military high school students