13,959 research outputs found
Formulation development and microstructure analysis of a polymer modified bitumen emulsion road surfacing : a thesis presented in partial fulfilment of the requirements for the degree of Master of Technology in Product Development at Massey University, Palmerston North, New Zealand
The purpose of this research was to develop a formulation for a polymer modified bitumen emulsion road surfacing product called microsurfacing to a mid-scale prototype stage. A supplementary part of the development was to investigate the polymer-bitumen interactions and how they affected the products end properties using confocal microscopy. The formulation development consisted of three stages: technical design specifications, initial design, detailed design. The technical specification was developed to define the product performance in quantitative measures, and set the initial formulation parameters to work within. The initial design development screened three polymers, four methods of adding polymer to the emulsion and two grades of bitumen. Experimental design techniques were used to determine the best polymer-bitumen combination and emulsion process method. Further experimental investigations consisted of screening three emulsifiers and assessing the effect of aggregate cleanliness on the surfacing abrasion and curing rate. The detailed design used experimental factorial design to examine the effects of polymer concentration, emulsifier level, and emulsifier pH on the emulsion stability, microsurfacing wear resistance and cure rate. The emulsion residue was observed using confocal microscopy with fluorescence light and the microsurfacing mixture using both fluorescent and reflected light. The research showed that a emulsion using 100 penetration grade Safaniya bitumen with SBR latex polymer post added could provide microsurfacing abrasion resistance of less than 100 g/m
2
; an improvement of 85% on the minimum specification. The vertical permanent deformation was less than the 10% and could not be attained without polymer addition. The use of aggregate with a high cleanliness and an alkyl amidoamine emulsifier resulted in surfacing cohesion development of 20 kg-cm within 90 minutes, which compares closely to the international specification. Unexpected results not reported before were that the emulsion residue from biphase modified emulsions had a softening point up to 10°C higher than polymer modified hot bitumen with the same polymer concentration. The biphase emulsified binder residue also has a very different microstructure to hot modified bitumen and this structure has been proposed to help account for the improved resistance to high temperature and applied stress. Modifications to the formulation are to improve the emulsion settlement and should focus on the density difference between the bitumen and polymer latex. This research has shown that a microsurfacing reading product can be successfully formulated with New Zealand bitumen and aggregate sources to meet key specified performance requirements. By systematically investigating the effects of materials on the performance properties of the product, a formulation ready for a mid-scale experiment has been proposed
VADER: A Flexible, Robust, Open-Source Code for Simulating Viscous Thin Accretion Disks
The evolution of thin axisymmetric viscous accretion disks is a classic
problem in astrophysics. While models based on this simplified geometry provide
only approximations to the true processes of instability-driven mass and
angular momentum transport, their simplicity makes them invaluable tools for
both semi-analytic modeling and simulations of long-term evolution where two-
or three-dimensional calculations are too computationally costly. Despite the
utility of these models, the only publicly-available frameworks for simulating
them are rather specialized and non-general. Here we describe a highly
flexible, general numerical method for simulating viscous thin disks with
arbitrary rotation curves, viscosities, boundary conditions, grid spacings,
equations of state, and rates of gain or loss of mass (e.g., through winds) and
energy (e.g., through radiation). Our method is based on a conservative,
finite-volume, second-order accurate discretization of the equations, which we
solve using an unconditionally-stable implicit scheme. We implement Anderson
acceleration to speed convergence of the scheme, and show that this leads to
factor of speed gains over non-accelerated methods in realistic
problems, though the amount of speedup is highly problem-dependent. We have
implemented our method in the new code Viscous Accretion Disk Evolution
Resource (VADER), which is freely available for download from
https://bitbucket.org/krumholz/vader/ under the terms of the GNU General Public
License.Comment: 58 pages, 13 figures, accepted to Astronomy & Computing; this version
includes more discussion, but no other changes; code is available for
download from https://bitbucket.org/krumholz/vader
A New Method for Estimating Dark Matter Halo Masses using Globular Cluster Systems
All galaxies are thought to reside within large halos of dark matter, whose
properties can only be determined from indirect observations. The formation and
assembly of galaxies is determined from the interplay between these dark matter
halos and the baryonic matter they host. Although statistical relations can be
used to approximate how massive a galaxy's halo is, very few individual
galaxies have direct measurements of their halo masses. We present a method to
directly estimate the total mass of a galaxy's dark halo using its system of
globular clusters. The link between globular cluster systems and halo masses is
independent of a galaxy's type and environment, in contrast to the relationship
between galaxy halo and stellar masses. This trend is expected in models where
globular clusters form in early, rare density peaks in the cold dark matter
density field and the epoch of reionisation was roughly coeval throughout the
Universe. We illustrate the general utility of this relation by demonstrating
that a galaxy's supermassive black hole mass and global X-ray luminosity are
directly proportional to their host dark halo masses, as inferred from our new
method.Comment: 6 pages, 4 colour figures. Accepted by MNRAS Letters. Data catalogue
available from the first autho
Mass-energy balance for an S-1C rocket exhaust cloud during static firing
Rocket exhaust cloud mass-energy balance measurements for Saturn S1-C static firin
Marine Heritage Monitoring with High Resolution Survey Tools: ScapaMAP 2001-2006
Archaeologically, marine sites can be just as significant as those on land. Until recently, however, they were not protected in the UK to the same degree, leading to degradation of sites; the difficulty of investigating such sites still makes it problematic and expensive to properly describe, schedule and monitor them. Use of conventional high-resolution survey tools in an archaeological context is changing the economic structure of such investigations however, and it is now possible to remotely but routinely monitor the state of submerged cultural artifacts. Use of such data to optimize expenditure of expensive and rare assets (e.g., divers and on-bottom dive time) is an added bonus. We present here the results of an investigation into methods for monitoring of marine heritage sites, using the remains of the Imperial German Navy (scuttled 1919) in Scapa Flow, Orkney as a case study. Using a baseline bathymetric survey in 2001 and a repeat bathymetric and volumetric survey in 2006, we illustrate the requirements for such surveys over and above normal hydrographic protocols and outline strategies for effective imaging of large wrecks. Suggested methods for manipulation of such data (including processing and visualization) are outlined, and we draw the distinction between products for scientific investigation and those for outreach and education, which have very different requirements. We then describe the use of backscatter and volumetric acoustic data in the investigation of wrecks, focusing on the extra information to be gained from them that is not evident in the traditional bathymetric DTM models or sounding point-cloud representations of data. Finally, we consider the utility of high-resolution survey as part of an integrated site management policy, with particular reference to the economics of marine heritage monitoring and preservation
The geometry and physical properties of exhaust clouds generated during the static firing of S-1C and S-2 rocket engines
An experimental program was conducted during the static firing of the S-1C stage 13, 14, and 15 rocket engines and the S-2 stage 13, 14, and 15 rocket engines. The data compiled during the experimental program consisted of photographic recordings of the time-dependent growth and diffusion of the exhaust clouds, the collection of meteorological data in the ambient atmosphere, and the acquisition of data on the physical structure of the exhaust clouds which were obtained by flying instrumented aircraft through the clouds. A new technique was developed to verify the previous measurements of evaporation and entrainment of blast deflector cooling water into the cloud. The results of the experimental program indicate that at the lower altitudes the rocket exhaust cloud or plume closely resembles a free-jet type of flow. At the upper altitudes, where the cloud is approaching an equilibrium condition, structure is very similar to a natural cumulus cloud
The Southern Vilnius Photometric System. IV. The E Regions Standard Stars
This paper is the fourth in a series on the extension of the Vilnius
photometric system to the southern hemisphere. Observations were made of 60
stars in the Harvard Standard E regions to increase a set of standard stars.Comment: 6 pages, TeX, requires 2 macros (baltic2.tex, baltic4.tex) included
no figures, to be published in Baltic Astronomy, Vol 6, pp1-6 (1997
- …