Assessment of the capacity of a pyrophosphate-based mouth rinse to inhibit the formation of supragingival dental calculus. a randomized double-blind placebo-controlled clinical trial

This study aimed to analyze the efficacy of an anti-calculus mouth rinse and its possible adverse effects on the mucosa and teeth. This randomized double-blind placebo-controlled clinical trial included 40 patients with treated and managed periodontal disease, all with a history of rapid calculus formation. Patients used a pyrophosphate-based test mouth rinse (B) or a placebo (A). A range of parameters were measured for: saliva (saliva flow, pH and chemical composition); calculus (Volpe-Manhold [V-M] index, weight, and volume); adverse effects on mucosa and teeth; and the patients? subjective perceptive of mouth rinse efficacy. The test mouth rinse B produced reductions in urea, uric acid, and phosphorous, calcium, saliva flow, and increases in pH. V-M index and calculus weight decreased after using the test mouth rinse. Calculus volume decreased with both mouth rinses. No changes to the mucosa or teeth were observed. Patients perceived that the test mouth rinse was more effective. The test/B and placebo mouth rinses both modified certain parameters in saliva composition, particularly reductions in urea, uric acid, and phosphorous. Calcium tended to increase after using the test-B mouth rinse. The results did not demonstrate the anticalculus efficacy of the pyrophosphate-based mouth rinse or positive effects on saliva flow or composition. This field requires further research, as no product has been developed that prevents calculus formation completely

Osteoartrosis de la articulación temporomandibular: estudio clínico y radiológico de 16 pacientes

Objetivo: El objetivo del presente estudio fue describir las características clínicas y radiológicas de 16 pacientes con osteoartrosis (OA) de la articulación temporomandibular (ATM). Material y métodos: En el estudio participaron aquellos pacientes que reunieran los criterios diagnósticos para la OA propuestos por Stegenga y cols en 1989. Los pacientes fueron sometidos a un protocolo de diagnóstico tanto clínico como por técnicas de imagen (obteniéndose los datos de una resonancia nuclear magnética). Resultados: Los signos clínicos más destacados fueron la presencia de crepitación a la auscultación en un 93,8% de los casos, y una disminución en el rango de los movimientos mandibulares. Los hallazgos radiológicos mostraron una alteración en la morfología de las superficies articulares en un 62% de los casos en el lado derecho y en un 68,8% de los pacientes en el lado izquierdo. En el estudio de la posición dinámica del disco articular se observó un desplazamiento anterior sin reducción en el 50% de los casos en la ATM derecha y en un 43,8% en la izquierda. Conclusiones: Los pacientes con OA de la ATM presentan crepitación y disminución en el rango de los movimientos mandibulares, siendo la alteración de la morfología articular el rasgo radiológico más destacable.A study is made of the clinical and radiological characteristics of 16 patients with osteoarthrosis (OA) of the temporomandibular joint (TMJ). The study comprised those patients satisfying the diagnostic criteria for OA proposed by Stegenga et al. in 1989. The patients were subjected to a clinical and radiological diagnostic protocol (including the obtainment of magnetic resonance imaging data). The most relevant clinical findings were the detection of crepitants in 93.8% of cases, with a reduction in mandibular movement range. Radiology in turn identified joint surface alterations in 62% of cases on the right side, and in 68.8% of the patients on the left side. The joint disc dynamic position study showed anterior displacement without reduction in 50% of cases in the right joint and in 43.8% of patients in the left joint. In conclusion, patients with OA of the TMJ present joint sounds and a reduced mandibular movement range ' the salient radiological characteristic being altered joint morphology

Retrospective study of a series of 850 patients with temporomandibular dysfunction (TMD). Clinical and radiological findings

Objective: To define the clinical and radiological characteristics of the four most common presentations of temporomandibular dysfunction-myofascial pain (MFP), disc displacement with reduction (DDWR), disc displacement without reduction (DDWoR), and osteoarthrosis (OR)-and to identify the differences among them. Material and methods: The study comprised a series of 850 patients (121 males and 729 females) seen between May 2003 and December 2006 in Valencia University General Hospital (Spain) for temporomandibular joint disease (TMJD). An analysis was made of the possible etiological factors (stress, traumatisms, sleep disturbances, parafunctional habits, reason for consultation), possible pain sensations in response to palpation of the masticatory muscles, joint sounds, etc. A panoramic X-ray study was made on a routine basis, and in some patients (n = 54) the study was completed with a magnetic resonance imaging scan of the temporomandibular joints and related tissues. The differences between qualitative variables were examined by means of the chi-square test with R x C contingency tables and the Z-test, while quantitative variables were contrasted by analysis of variance (ANOVA) and post hoc testing (Scheffe). Results: The variables showing statistically significant differences among the four diagnostic categories were: patient age, sleep disturbances, stress, parafunctional habits, nibbling on hard objects and ?parafunctions?, reason for consultation, mandibular movements, ?non-evaluable? molar and canine relationship, ligament hyperlaxity, and panoramic X-ray alterations

The Influence of Keratinized Mucosa on the Nonsurgical Therapeutic Treatment of Peri-Implantitis

Objective: The main objective of this study aimed to evaluate the response to treatment in implants with peri-implantitis regarding the presence or absence of keratinized mucosa. Materials and Methods: One hundred implants with peri-implantitis were treated non-surgically at the Prosthodontics and Occlusion Teaching Unit of the University of Valencia. Records were registered at day zero (recession, bleeding on probing, suppuration, probing depth, bone loss and plaque index), at 1, 3 and 6 months. Results: In both groups, a slight increase in recession and disappearance of suppuration took place, and no bone loss was observed during the following 6 months. However, after an initial reduction, probing depth, bleeding on probing and plaque index increased again in the group without keratinized mucosa (KM). Conclusions: Implants with KM presented better results after non-surgical treatment as well as in their medium-term evolution, although it would be advisable to increase the number of samples in order to achieve greater scientific evidence and standardization in the treatment protocol. Clinical relevance: The role of keratinized mucosa in the development of peri-implantitis has been mentioned in many publications, but less has been emphasized regarding its influence on the success of the treatment of this pathology. The presence of keratinized mucosa has been found to play a key role in the evolution of the non-surgical treatment of peri-implantitis. The amount of keratinized mucosa should be considered in the treatment of peri-implantitis, as well as when planning connective tissue grafts accompanying the decontamination of implants in the absence of keratinized mucosa.Odontologí

Immediate placement of single implant simultaneously with immediate loading in a fresh socket associated to periapical infection: a clinical case report

Early restoration of the masticatory function, phonatory and aesthetics is some of the current goals of the therapy based on endosseous implants. Facing the classic protocols of implant insertion, which recommend a period of several months between extraction and implant placement, alternatives have been developed that demonstrate that immediate implant placement after tooth extraction permits adequate osseointegration, even in those cases where there is a periapical disease. The immediate restoration of implants after placement is a possibility where aesthetic requirements are high. This article presents a case with immediate implant placement and immediate loading of a first upper premolar with prior periapical pathology due to a vertical fracture. The immediate prosthetic was performed using the extracted crown, which is adapted to be attached to a titanium temporary abutment using a resin cement. After a 4 month healing period work began on the final prosthetic crown. The screw crown was made of zirconium oxide with a covering feldspathic ceramic. At the 12-month follow-up, there were no mechanical or biological complications. The patient gave high satisfaction marks for the overall treatment, giving visual analogue scale score of nine. Immediate post-extraction implants have arisen as an alternative to traditional implants on completely healed bone. Their main aim is to reduce treatment time and number of surgical procedures, along with other objectives such as reduced bone re-absorption and improved aesthetics

Zirconia in fixed prosthesis. A literature review

Statement of problem: Evidence is limited on the efficacy of zirconia-based fixed dental prostheses. Objective: To carry out a literature review of the behavior of zirconium oxide dental restorations. Material and Methods: This literature review searched the Pubmed, Scopus, Medline and Cochrane Library databases using key search words 'zirconium oxide,' 'zirconia,' 'non-metal restorations,' 'ceramic oxides,' 'veneering ceramic,' 'zirconia-based fixed dental prostheses'. Both in vivo and in vitro studies into zirconia-based prosthodontic restoration behavior were included. Results: Clinical studies have revealed a high rate of fracture for porcelain-veneered zirconia-based restorations that varies between 6% and 15% over a 3- to 5-year period, while for ceramo-metallic restorations the fracture rate ranges between 4 and 10% over ten years. These results provoke uncertainty as to the long-term prognosis for this material in the oral medium. The cause of veneering porcelain fractures is unknown but hypothetically they could be associated with bond failure between the veneer material and the zirconia sub-structure

Traction test of temporary dental cements

Classic self-curing temporary cements obstruct the translucence of provisional restorations. New dual-cure esthetic temporary cements need investigation and comparison with classic cements to ensure that they are equally retentive and provide adequate translucence. The objective is to analyze by means of traction testing in a in vitro study the retention of five temporary cements. Ten molars were prepared and ten provisional resin restorations were fabricated using CAD-CAM technology (n=10). Five temporary cements were selected: self-curing temporary cements, Dycal (D), Temp Bond (TB), Temp Bond Non Eugenol (TBNE); dual-curing esthetic cements Temp Bond Clear (TBC) and Telio CS link (TE). Each sample underwent traction testing, both with thermocycling (190 cycles at 5-55º) and without thermocycling. TE and TBC obtained the highest traction resistance values. Thermocycling reduced the resistance of all cements except TBC. The dual-cure esthetic cements tested provided optimum outcomes for bonding provisional restorations

In vivo evaluation of three-dimensional of volumetric changes using a CAD/CAM chair-side system : technical procedure

An intraoral digital scanner in combination with specialized three-dimensional surface analysis software monitors volumetric changes to soft tissues or dental restorations. This technology can evaluate the success of a specific technique or medium- or long-term clinical outcomes in both clinical and research situations. This article describes how this technology was used to provide immediate chair-side data analysis without the help of specialized laboratory support

Methodology in specimen fabrication for in vitro dental studies : standardization of extracted tooth preparation

Specimen preparation for in vitro study suffers a general lack of methodological homogeneity, as well as a lack of uniformity in the materials selected for fabricating them. This situation prevents comparisons between studies. When a specimen is not of dental origin it is not possible to study adhesion or bonding techniques realistically. The objective is to design and implement a method of specimen preparation that permits universal standardization for use in in vitro studies. A metal stump of specified dimensions was designed and fabricated by hand. It was scanned, the data digitalized, perfecting and standardizing the dimensions. Ten human molars were adapted to the size and shape of a standard milling block. A Cerec 3D inLab Cerec milling unit was used to prepare the molars to match the digitalized model. Ten specimens with identical dimensions were obtained. CAD-CAM technology allows the preparation of natural extracted teeth to be standardized and could be used to establish a reproducible method that would facilitate comparison between different in vitro studies, and reduce bias arising from variations in sample fabrication

Choice of ceramic for use in treatments with porcelain laminate veneers

El tratamiento mediante Frentes Laminados de Porcelana (FLP) se utiliza desde hace más de dos décadas para el tratamiento de problemas estéticos y/o funcionales, particularmente en el grupo anterior de las arcadas dentarias (1,2,3). La actual oferta en el mercado de cerámicas dentales aptas para este tipo de tratamiento, pero muy distintas en cuanto a composición, características ópticas y sistema de elaboración, hace complicada la selección del material más adecuado a cada paciente en particular. Proponemos un sistema sencillo de elección de la cerámica teniendo en cuenta las dos variables que más influirán en el resultado estético final: de un lado las características propias del diente (sustrato en el que nos apoyamos), y de otro las características propias del material cerámico en cuanto a resistencia y propiedades ópticas