Surface Passivation and Junction Formation Using Low Energy Hydrogen Implants

New applications for high current, low energy hydrogen ion implants on single crystal and polycrystal silicon grain boundaries are discussed. The effects of low energy hydrogen ion beams on crystalline Si surfaces are considered. The effect of these beams on bulk defects in crystalline Si is addressed. Specific applications of H+ implants to crystalline Si processing are discussed. In all of the situations reported on, the hydrogen beams were produced using a high current Kaufman ion source

Use of low energy hydrogen ion implants in high efficiency crystalline silicon solar cells

This program is a study of the use of low energy hydrogen ion implantation for high efficiency crystalline silicon solar cells. The first quarterly report focuses on two tasks of this program: (1) an examination of the effects of low energy hydrogen implants on surface recombination speed; and (2) an examination of the effects of hydrogen on silicon regrowth and diffusion in silicon. The first part of the project focussed on the measurement of surface properties of hydrogen implanted silicon. Low energy hydrogen ions when bombarded on the silicon surface will create structural damage at the surface, deactivate dopants and introduce recombination centers. At the same time the electrically active centers such as dangling bonds will be passivated by these hydrogen ions. Thus hydrogen is expected to alter properties such as the surface recombination velocity, dopant profiles on the emitter, etc. In this report the surface recombination velocity of a hydrogen emplanted emitter was measured

Basic mechanisms study for MIS solar cell structures on GaAs

The solar cell structure examined is the MIS configuration on (n) GaAs. The metal room temperature oxide/(n) GaAs materials system was studied. Metals with electronegativities varying from 2.4 (Au) to 1.5 (Al) were used as the upper electrode. The thinnest metallization that did not interfere with the measurement techniques (by introducing essentially transmission line series resistance problems across a device) was used. Photovoltaic response was not optimized

Use of low-energy hydrogen ion implants in high-efficiency crystalline-silicon solar cells

The use of low-energy hydrogen implants in the fabrication of high-efficiency crystalline silicon solar cells was investigated. Low-energy hydrogen implants result in hydrogen-caused effects in all three regions of a solar cell: emitter, space charge region, and base. In web, Czochralski (Cz), and floating zone (Fz) material, low-energy hydrogen implants reduced surface recombination velocity. In all three, the implants passivated the space charge region recombination centers. It was established that hydrogen implants can alter the diffusion properties of ion-implanted boron in silicon, but not ion-implated arsenic

Lightly Fluorinated Graphene as a Protective Layer for n-Type Si(111) Photoanodes in Aqueous Electrolytes

The behavior of n-Si(111) photoanodes covered by monolayer sheets of fluorinated graphene (F–Gr) was investigated under a range of chemical and electrochemical conditions. The electrochemical behavior of n-Si/F–Gr and np^+-Si/F–Gr photoanodes was compared to hydride-terminated n-Si (n-Si−H) and np+-Si−H electrodes in contact with aqueous Fe(CN)_6^(3-/4-) and Br_2/HBr electrolytes as well as in contact with a series of outer-sphere, one-electron redox couples in nonaqueous electrolytes. Illuminated n-Si/F–Gr and np^+-Si/F–Gr electrodes in contact with an aqueous K_3(Fe(CN)_6/K4(Fe(CN)_6 solutions exhibited stable short-circuit photocurrent densities of ∼10 mA cm^(–2) for 100,000 s (>24 h), in comparison to bare Si electrodes, which yielded nearly a complete photocurrent decay over ∼100 s. X-ray photoelectron spectra collected before and after exposure to aqueous anodic conditions showed that oxide formation at the Si surface was significantly inhibited for Si electrodes coated with F–Gr relative to bare Si electrodes exposed to the same conditions. The variation of the open-circuit potential for n-Si/F–Gr in contact with a series of nonaqueous electrolytes of varying reduction potential indicated that the n-Si/F–Gr did not form a buried junction with respect to the solution contact. Further, illuminated n-Si/F−Gr electrodes in contact with Br_2/HBr(aq) were significantly more electrochemically stable than n-Si−H electrodes, and n-Si/F−Gr electrodes coupled to a Pt catalyst exhibited ideal regenerative cell efficiencies of up to 5% for the oxidation of Br^– to Br_2

Observation of Photovoltaic Action from Photoacid-Modified Nafion Due to Light-Driven Ion Transport

Replacing passive ion-exchange membranes, like Nafion, with membranes that use light to drive ion transport would allow membranes in photoelectrochemical technologies to serve in an active role. Toward this, we modified perfluorosulfonic acid ionomer membranes with organic pyrenol-based photoacid dyes to sensitize the membranes to visible light and initiate proton transport. Covalent modification of the membranes was achieved by reacting Nafion sulfonyl fluoride poly(perfluorosulfonyl fluoride) membranes with the photoacid 8-hydroxypyrene-1,3,6-tris(2-aminoethylsulfonamide). The modified membranes were strongly colored and maintained a high selectivity for cations over anions. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and ion-exchange measurements together provided strong evidence of covalent bond formation between the photoacids and the polymer membranes. Visible-light illumination of the photoacid-modified membranes resulted in a maximum power-producing ionic photoresponse of ∼100 μA/cm2 and ∼1 mV under 40 Suns equivalent excitation with 405 nm light. In comparison, membranes that did not contain photoacids and instead contained ionically associated RuII-polypyridyl coordination compound dyes, which are not photoacids, exhibited little-to-no photoeffects (∼1 μA/cm2). These disparate photocurrents, yet similar yields for nonradiative excited-state decay from the photoacids and the RuII dyes, suggest temperature gradients were not likely the cause of the observed photovoltaic action from photoacid-modified membranes. Moreover, spectral response measurements supported that light absorption by the covalently bound photoacids was required in order to observe photoeffects. These results represent the first demonstration of photovoltaic action from an ion-exchange membrane and offer promise for supplementing the power demands of electrochemical processes with renewable sunlight-driven ion transport

World of Nanotechnology: Introduction to Nanotechnology

The webinar World of nanotechnology: Introduction to Nanotechnology was held on September 30, 2011. This webinar was presented by Dr. Stephen J. Fonash of the National Center for Nanotechnology Applications and Career Knowledge (NACK). This presentation provides an overview of nanotechnology and an explanation of why the nano-scale is so unique. The presentation also outlines the many applications of nanotechnology today, including the use of nanotechnology in creating plastics and polymers, studying cancer cells, drug delivery, and creating better imaging tools for biological research. The webinar runs 01:26:50 minutes in length and is accompanied by a slide deck and a 1-page handout. The accompanying handout provides a list of resources related to nanotechnology that may be downloaded for free.Â

Nanotechnology Glossary

This glossary is provided by the Nanotechnology Applications and Career Knowledge Support Center (NACK Center) and includes definitions for nanotechnology related terminology. Terms include actin, adsorbate, allowed energies, anisotropic, anneal, antibodies, antigens, assembly, atomic force microscope, atoms, bottom-up nanofabrication, buckeyball, building blocks, carbon nanotube, dry physical etching, electrode, flagellar micromotor, fluorophores, forbidden energies, friction, fuel cells, and many more.Â