Bulk and integrated acousto-optic spectrometers for radio astronomy

The development of sensitive heterodyne receivers (front end) in the centimeter and millimeter range, and the construction of sensitive RF spectrometers (back end) enable the spectral lines of interstellar molecules to be detected and identified. A technique was developed which combines acoustic bending of a collimated coherent light beam by a Bragg cell followed by detection by a sensitive array of photodetectors (thus forming an RF acousto-optic spectrometer (AOS). An AOS has wide bandwidth, large number of channels, and high resolution, and is compact, lightweight, and energy efficient. The thrust of receiver development is towards high frequency heterodyne systems, particularly in the millimeter, submillimeter, far infrared, and 10 micron spectral ranges

Acousto-optic spectrometer for radio astronomy

A prototype acousto-optic spectrometer which uses a discrete bulk acoustic wave Itek Bragg cell, 5 mW Helium Neon laser, and a 1024 element Reticon charge coupled photodiode array is described. The analog signals from the photodiode array are digitized, added, and stored in a very high speed custom built multiplexer board which allows synchronous detection of weak signals to be performed. The experiment is controlled and the data are displayed and stored with an LSI-2 microcomputer system with dual floppy discs. The performance of the prototype acousto-optic spectrometer obtained from initial tests is reported

Metastable states influence on the magnetic behavior of the triangular lattice: Application to the spin-chain compound Ca3Co2O6

It is known that the spin-chain compound Ca3Co2O6 exhibits very interesting plateaus in the magnetization as a function of the magnetic field at low temperatures. The origin of them is still controversial. In this paper we study the thermal behavior of this compound with a single-flip Monte Carlo simulation on a triangular lattice and demonstrate the decisive influence of metastable states in the splitting of the ferrimagnetic 1/3 plateau below 10 K. We consider the [Co2O6]n chains as giant magnetic moments described by large Ising spins on planar clusters with open boundary conditions. With this simple frozen-moment model we obtain stepped magnetization curves which agree quite well with the experimental results for different sweeping rates. We describe particularly the out-of-equilibrium states that split the low-temperature 1/3 plateau into three steps. They relax thermally to the 1/3 plateau, which has long-range order at the equilibrium. Such states are further analyzed with snapshots unveiling a domain-wall structure that is responsible for the observed behavior of the 1/3 plateau. A comparison is also given of the exact results in small triangular clusters with our Monte Carlo results, providing further support for our thermal description of this compound.Comment: 8 pages, 11 figures, submitted to PR

Co-Inoculation of Plant-Growth-Promoting Bacteria Modulates Physiological and Biochemical Responses of Perennial Ryegrass to Water Deficit

Perennial ryegrass is a forage commonly used in temperate regions for livestock feeding; however, its yield is affected by reduced biomass production under water deficit. In a previous study, three co-inoculations of beneficial bacteria were selected based on their ability to promote plant growth under reduced water availability. The aim of this work was to elucidate some mechanisms by which the selected bacteria can help improve the response of perennial ryegrass to water deficit. Ryegrass plants were inoculated with each of the co-inoculations (Herbaspirillum sp. AP02 Herbaspirillum sp. AP21; Herbaspirillum sp. AP02–Pseudomonas sp. N7; Herbaspirillum sp. AP21–Azospirillum brasilense D7) and subjected to water deficit for 10 days. Physiological and biochemical measurements were taken 10 days after stress and shortly after rehydration. The results showed that bacteria had a positive effect on shoot biomass production, dissipation of excess energy, and proline and chlorophyll pigments during the days of water deficit (p < 0.05). The leaf water status of the inoculated plants was 12% higher than that of the uninoculated control after rehydration. Two Herbaspirillum strains showed greater potential for use as biofertilizers that help ameliorate the effects of water deficit

Dispersive detection of radio-frequency-dressed states

We introduce amethod to dispersively detect alkali-metal atoms in radio-frequency-dressed states. In particular, we use dressed detection tomeasure populations and population differences of atoms prepared in their clock states. Linear birefringence of the atomic medium enables atom number detection via polarization homodyning, a form of common path interferometry. In order to achieve low technical noise levels, we perform optical sideband detection after adiabatic transformation of bare states into dressed states. The balanced homodyne signal then oscillates independently of field fluctuations at twice the dressing frequency, thus allowing for robust, phase-locked detection that circumvents low-frequency noise. Using probe pulses of two optical frequencies, we can detect both clock states simultaneously and obtain population difference as well as the total atom number. The scheme also allows for difference measurements by direct subtraction of the homodyne signals at the balanced detector, which should technically enable quantum noise limited measurements with prospects for the preparation of spin squeezed states. The method extends to other Zeeman sublevels and can be employed in a range of atomic clock schemes, atom interferometers, and other experiments using dressed atoms

Coordination of specialised energy aggregators for balancing service provision

In the present context of evolution of the power and energy systems, more flexibility is required on the generation and demand side, to cope with the increasing uncertainty mostly introduced by variable renewable energy resources. This paper presents a conceptual framework that encompasses different types of aggregators, including local network aggregators, demand-side general aggregators, specialised energy aggregators (SEAs), and energy community aggregators. In this framework, this paper focuses on the coordination of SEAs to provide balancing services to the system operator. Each SEA manages a specific type of load, so that these loads can be managed by exploiting their control capabilities in a detailed way considering response time, dynamics and available flexibility. Moreover, the presence of the SEAs increases the privacy protection of the users, as only the information on a specific type of user's load is sent to the SEA. The SEA Coordinator interacts with the Balancing Service Provider aimed at procuring frequency containment, frequency restoration and replacement reserve services. This paper contains the SEA Coordinator formulation, information exchange and control operation strategies. Case study applications are presented by using SEAs for three specific types of loads (thermoelectric refrigerator, water booster pressure systems and electric vehicle charging stations). The results show how the control algorithm of the SEA Coordinator is effective in providing balancing services at different timings with the different types of loads. Various scenarios are considered, comparing an ideal situation without command propagation delays with realistic situations that take into account the command propagation delays

In silico assessment of the bone regeneration potential of complex porous scaffolds.

Mechanical environment plays a crucial role in regulating bone regeneration in bone defects. Assessing the mechanobiological behavior of patient-specific orthopedic scaffolds in-silico could help guide optimal scaffold designs, as well as intra- and post-operative strategies to enhance bone regeneration and improve implant longevity. Additively manufactured porous scaffolds, and specifically triply periodic minimal surfaces (TPMS), have shown promising structural properties to act as bone substitutes, yet their ability to induce mechanobiologially-driven bone regeneration has not been elucidated. The aim of this study is to i) explore the bone regeneration potential of TPMS scaffolds made of different stiffness biocompatible materials, to ii) analyze the influence of pre-seeding the scaffolds and increasing the post-operative resting period, and to iii) assess the influence of patient-specific parameters, such as age and mechanosensitivity, on outcomes. To perform this study, an in silico model of a goat tibia is used. The bone ingrowth within the scaffold pores was simulated with a mechano-driven model of bone regeneration. Results showed that the scaffold's architectural properties affect cellular diffusion and strain distribution, resulting in variations in the regenerated bone volume and distribution. The softer material improved the bone ingrowth. An initial resting period improved the bone ingrowth but not enough to reach the scaffold's core. However, this was achieved with the implantation of a pre-seeded scaffold. Physiological parameters like age and health of the patient also influence the bone regeneration outcome, though to a lesser extent than the scaffold design. This analysis demonstrates the importance of the scaffold's geometry and its material, and highlights the potential of using mechanobiological patient-specific models in the design process for bone substitutes