283 research outputs found
Effect of Axial Agitator Configuration (Up-Pumping, Down-Pumping, Reverse Rotation) on Flow Patterns Generated in Stirred Vessels
Single phase turbulent flow in a tank stirred with two different axial impellers - a pitched blade turbine
(PBT) and a Mixel TT (MTT)- has been studied using Laser Doppler Velocimetry. The effect of the
agitator configuration, i.e. up-pumping, down-pumping and reverse rotation, on the turbulent flow field,
as well as power, circulation and pumping numbers has been investigated. An agitation index for each
configuration was also determined. In the down-pumping mode, the impellers induced one circulation
loop and the upper part of the tank was poorly mixed. When up-pumping, two circulation loops are
formed, the second in the upper vessel. The PBT pumping upwards was observed to have a lower flow
number and to consume more power than when down-pumping, however the agitation index and
circulation efficiencies were notably higher. The MTT has been shown to circulate liquid more efficiently
in the up-pumping configuration than in the other two modes. Only small effects of the MTT
configuration on the power number, flow number and pumping effectiveness have been observed
Design of micromixers using CFD modelling
The effect of various geometrical parameters of a grooved staggered herringbone micromixer on the mixing performance has been investigated using Computational Fluid Dynamics. Mixing quality has been quantified with spatial data statistics, maximum striation thickness and residence time analyses. The results show that the number of grooves per mixing cycle does not affect the mixing quality in an important way. On the other hand, a larger groove depth and width allow the maximum striation thickness to be rapidly reduced, without increasing the pressure drop across the mixer. Wide grooves, however, create significant dead zones in the microchannel, whereas deep grooves improve the spatial mixing quality
Impact of thixotropy on flow patterns induced in a stirred tank : numerical and experimental studies
Agitation of a thixotropic shear-thinning fluid exhibiting a yield stress is investigated both experimentally and via simulations. Steady-state experiments are conducted at three impeller rotation rates (1, 2 and 8 s−1) for a tank stirred with an axial-impeller and flow-field measurements are made using particle image velocimetry (PIV) measurements. Threedimensional numerical simulations are also performed using the commercial CFD code ANSYS CFX10.0. The viscosity of the suspension is determined experimentally and is modelled using two shear-dependant laws, one of which takes into account the flow instabilities of such fluids at low shear rates. At the highest impeller speed, the flow exhibits the familiar outward pumping action associated with axial-flow impellers. However, as the impeller speed decreases, a cavern is formed around the impeller, the flow generated in the vicinity of the agitator reorganizes and its pumping capacity vanishes. An unusual flow pattern, where the radial velocity dominates, is observed experimentally at the lowest stirring speed. It is found to result from wall slip effects. Using blades with rough surfaces prevents this peculiar behaviour and mainly resolves the discrepancies between the experimental and computational results
On the ultimate convergence rates for isotropic algorithms and the best choices among various forms of isotropy
In this paper, we show universal lower bounds for isotropic algorithms, that hold for any algorithm such that each new point is the sum of one already visited p oint plus one random isotropic direction multiplied by any step size (whenever the step size is chosen by an oracle with arbitrarily high computational power). The bound is 1 − O(1/d) for the constant in the linear convergence (i.e. the constant C such that the distance to the optimum after n steps is upp er b ounded by C n ), as already seen for some families of evolution strategies in [19, 12], in contrast with 1 − O(1) for the reverse case of a random step size and a direction chosen by an oracle with arbitrary high computational power. We then recall that isotropy does not uniquely determine the distribution of a sample on the sphere and show that the convergence rate in isotropic algorithms is improved by using stratified or antithetic isotropy instead of naive isotropy. We show at the end of the pap er that b eyond the mathematical proof, the result holds on exp eriments. We conclude that one should use antithetic-isotropy or stratified-isotropy, and never standard-isotropy
Imaging Spectroscopy of a White-Light Solar Flare
We report observations of a white-light solar flare (SOL2010-06-12T00:57,
M2.0) observed by the Helioseismic Magnetic Imager (HMI) on the Solar Dynamics
Observatory (SDO) and the Reuven Ramaty High-Energy Solar Spectroscopic Imager
(RHESSI). The HMI data give us the first space-based high-resolution imaging
spectroscopy of a white-light flare, including continuum, Doppler, and magnetic
signatures for the photospheric FeI line at 6173.34{\AA} and its neighboring
continuum. In the impulsive phase of the flare, a bright white-light kernel
appears in each of the two magnetic footpoints. When the flare occurred, the
spectral coverage of the HMI filtergrams (six equidistant samples spanning
\pm172m{\AA} around nominal line center) encompassed the line core and the blue
continuum sufficiently far from the core to eliminate significant Doppler
crosstalk in the latter, which is otherwise a possibility for the extreme
conditions in a white-light flare. RHESSI obtained complete hard X-ray and
\Upsilon-ray spectra (this was the first \Upsilon-ray flare of Cycle 24). The
FeI line appears to be shifted to the blue during the flare but does not go
into emission; the contrast is nearly constant across the line profile. We did
not detect a seismic wave from this event. The HMI data suggest stepwise
changes of the line-of-sight magnetic field in the white-light footpoints.Comment: 14 pages, 7 figures, Accepted by Solar Physic
EPUAP classification system for pressure ulcers: European reliability study
‘The definitive version is available at www3.interscience.wiley.com .' Copyright Blackwell PublishingPeer reviewe
Transient Magnetic and Doppler Features Related to the White-light Flares in NOAA 10486
Rapidly moving transient features have been detected in magnetic and Doppler
images of super-active region NOAA 10486 during the X17/4B flare of 28 October
2003 and the X10/2B flare of 29 October 2003. Both these flares were extremely
energetic white-light events. The transient features appeared during impulsive
phases of the flares and moved with speeds ranging from 30 to 50 km s.
These features were located near the previously reported compact acoustic
\cite{Donea05} and seismic sources \cite{Zharkova07}. We examine the origin of
these features and their relationship with various aspects of the flares, {\it
viz.}, hard X-ray emission sources and flare kernels observed at different
layers - (i) photosphere (white-light continuum), (ii) chromosphere (H
6563\AA), (iii) temperature minimum region (UV 1600\AA), and (iv) transition
region (UV 284\AA).Comment: 26 pages, 13 figures, 2 tables, accepted for publication in Solar
Physic
A tale of two capitalisms: preliminary spatial and historical comparisons of homicide rates in Western Europe and the USA
This article examines comparative homicide rates in the United States and Western Europe in an era of increasingly globalized neoliberal economics. The main finding of this preliminary analysis is that historical and spatial correlations between distinct forms of political economy and homicide rates are consistent enough to suggest that social democratic regimes are more successful at fostering the socio-cultural conditions necessary for reduced homicide rates. Thus Western Europe and all continents and nations should approach the importation of American neo-liberal economic policies with extreme caution. The article concludes by suggesting that the indirect but crucial causal connection between political economy and homicide rates, prematurely pushed into the background of criminological thought during the ‘cultural turn’, should be returned to the foreground
New Insights into White-Light Flare Emission from Radiative-Hydrodynamic Modeling of a Chromospheric Condensation
(abridged) The heating mechanism at high densities during M dwarf flares is
poorly understood. Spectra of M dwarf flares in the optical and
near-ultraviolet wavelength regimes have revealed three continuum components
during the impulsive phase: 1) an energetically dominant blackbody component
with a color temperature of T 10,000 K in the blue-optical, 2) a smaller
amount of Balmer continuum emission in the near-ultraviolet at lambda 3646
Angstroms and 3) an apparent pseudo-continuum of blended high-order Balmer
lines. These properties are not reproduced by models that employ a typical
"solar-type" flare heating level in nonthermal electrons, and therefore our
understanding of these spectra is limited to a phenomenological interpretation.
We present a new 1D radiative-hydrodynamic model of an M dwarf flare from
precipitating nonthermal electrons with a large energy flux of erg
cm s. The simulation produces bright continuum emission from a
dense, hot chromospheric condensation. For the first time, the observed color
temperature and Balmer jump ratio are produced self-consistently in a
radiative-hydrodynamic flare model. We find that a T 10,000 K
blackbody-like continuum component and a small Balmer jump ratio result from
optically thick Balmer and Paschen recombination radiation, and thus the
properties of the flux spectrum are caused by blue light escaping over a larger
physical depth range compared to red and near-ultraviolet light. To model the
near-ultraviolet pseudo-continuum previously attributed to overlapping Balmer
lines, we include the extra Balmer continuum opacity from Landau-Zener
transitions that result from merged, high order energy levels of hydrogen in a
dense, partially ionized atmosphere. This reveals a new diagnostic of ambient
charge density in the densest regions of the atmosphere that are heated during
dMe and solar flares.Comment: 50 pages, 2 tables, 13 figures. Accepted for publication in the Solar
Physics Topical Issue, "Solar and Stellar Flares". Version 2 (June 22, 2015):
updated to include comments by Guest Editor. The final publication is
available at Springer via http://dx.doi.org/10.1007/s11207-015-0708-
Svestka's Research: Then and Now
Zdenek Svestka's research work influenced many fields of solar physics,
especially in the area of flare research. In this article I take five of the
areas that particularly interested him and assess them in a "then and now"
style. His insights in each case were quite sound, although of course in the
modern era we have learned things that he could not readily have envisioned.
His own views about his research life have been published recently in this
journal, to which he contributed so much, and his memoir contains much
additional scientific and personal information (Svestka, 2010).Comment: Invited review for "Solar and Stellar Flares," a conference in honour
of Prof. Zden\v{e}k \v{S}vestka, Prague, June 23-27, 2014. This is a
contribution to a Topical Issue in Solar Physics, based on the presentations
at this meeting (Editors Lyndsay Fletcher and Petr Heinzel
- …