Evolution of precipitates, in particular cruciform and cuboid particles, during simulated direct charging of thin slab cast vanadium microalloyed steels

A study has been undertaken of four vanadium based steels which have been processed by a simulated direct charging route using processing parameters typical of thin slab casting, where the cast product has a thickness of 50 to 80mm ( in this study 50 mm) and is fed directly to a furnace to equalise the microstructure prior to rolling. In the direct charging process, cooling rates are faster, equalisation times shorter and the amount of deformation introduced during rolling less than in conventional practice. Samples in this study were quenched after casting, after equalisation, after 4th rolling pass and after coiling, to follow the evolution of microstructure. The mechanical and toughness properties and the microstructural features might be expected to differ from equivalent steels, which have undergone conventional processing. The four low carbon steels (~0.06wt%) which were studied contained 0.1wt%V (V-N), 0.1wt%V and 0.010wt%Ti (V-Ti), 0.1wt%V and 0.03wt%Nb (V-Nb), and 0.1wt%V, 0.03wt%Nb and 0.007wt%Ti (V-Nb-Ti). Steels V-N and V-Ti contained around 0.02wt% N, while the other two contained about 0.01wt%N. The as-cast steels were heated at three equalising temperatures of 1050C, 1100C or 1200C and held for 30-60 minutes prior to rolling. Optical microscopy and analytical electron microscopy, including parallel electron energy loss spectroscopy (PEELS), were used to characterise the precipitates. In the as-cast condition, dendrites and plates were found. Cuboid particles were seen at this stage in Steel V-Ti, but they appeared only in the other steels after equalization. In addition, in the final product of all the steels, fine particles were seen, but it was only in the two titanium steels that cruciform precipitates were present. PEELS analysis showed that the dendrites, plates, cuboids, cruciforms and fine precipitates were essentially nitrides. The two Ti steels had better toughness than the other steels but inferior lower yield stress values. This was thought to be, in part, due to the formation of cruciform precipitates in austenite, thereby removing nitrogen and the microalloying elements which would have been expected to precipitate in ferrite as dispersion hardening particles

RAÇÃO FARELADA COM DIFERENTES GRANULOMETRIAS EM FRANGOS DE CORTE

Em geral, o diâmetro geométrico médio (DGM) das partículas das rações não tem afetado o desempenho de frangos de corte, em situações experimentais. Por meio deste, objetivou-se verificar se o mesmo ocorre em criações comerciais e, também, avaliar possíveis benefícios econômicos do uso da ração com maior DGM. Para isso, o presente trabalho buscou avaliar o desempenho zootécnico em frangos de corte da linhagem ROSS, do 1º ao 42º dia de idade, arraçoados com diferentes granulometrias. O experimento foi conduzido nos meses de agosto e setembro de 1998, no aviário experimental da Cooperativa Agrícola Consolata Ltda. Em delineamento em blocos casualizados, foram testados os DGMs: 0,833, 0,703 e 1,058 mm, na fase pré-inicial; 0,829, 0,703 e 1,086 mm, na fase inicial, e; 0,818, 0,649 e 0,912 mm, na fase de crescimento. O DGM dos tratamentos apresentou influência (P < 0,05) sobre o consumo de ração de pintainhos na fase pré-inicial, sendo observadas poucas modificações (P > 0,05) no desempenho das outras fases de criação e na mortalidade das aves. Entretanto, a lucratividade inerente aos tratamentos, pode ser aumentada em até 2,78%, em função da diminuição da moagem e/ou aumento do DGM. Use of mashed rations with different particle sizes for broilers Abstract In general, the average geometric diameter (AGD) of ration has not affected broilers performance in experimental situations. The objective of this experiment was to investigate if such statement is true also for commercial farms and to evaluate the possible economic benefits of using larger ration particle sizes. For that, in the present work, ROSS broilers had theis performance estimated, from the 1st up to the 42nd day of age, fed with rations of different particle sizes. The experiment was developed during August and September of 1998, in the experimental aviary from Cooperativa Agrícola Consolata Ltda. Statistical design was of random blocks and treatment were (AGD's): 0.833, 0.703 and 1.058 mm, in the pre-initial phase; 0.829, 0.703 and 1.086 mm, in the initial phase, and; 0.818, 0.649 and 0.912 mm, in the growth phase. Treatments AGDs treatment showed influence (P < 0.05) on the consumption of chick ration in the pre-initial phase. Few modifications were observed (P > 0.05) in the acting of the other feeding phases and in the mortality of the birds. However, the gross margin related to treatments can be increased up to 2.78%, as a result of the decrease of the grinding and/or AGDs increase

Nonparametric instrumental regression with non-convex constraints

This paper considers the nonparametric regression model with an additive error that is dependent on the explanatory variables. As is common in empirical studies in epidemiology and economics, it also supposes that valid instrumental variables are observed. A classical example in microeconomics considers the consumer demand function as a function of the price of goods and the income, both variables often considered as endogenous. In this framework, the economic theory also imposes shape restrictions on the demand function, like integrability conditions. Motivated by this illustration in microeconomics, we study an estimator of a nonparametric constrained regression function using instrumental variables by means of Tikhonov regularization. We derive rates of convergence for the regularized model both in a deterministic and stochastic setting under the assumption that the true regression function satisfies a projected source condition including, because of the non-convexity of the imposed constraints, an additional smallness condition

In the Interests of clients or commerce? Legal aid, supply, demand, and 'ethical indeterminacy' in criminal defence work

As a professional, a lawyer's first duty is to serve the client's best interests, before simple monetary gain. In criminal defence work, this duty has been questioned in the debate about the causes of growth in legal aid spending: is it driven by lawyers (suppliers) inducing unnecessary demand for their services or are they merely responding to increased demand? Research reported here found clear evidence of a change in the handling of cases in response to new payment structures, though in ways unexpected by the policy's proponents. The paper develops the concept of 'ethical indeterminacy' as a way of understanding how defence lawyers seek to reconcile the interests of commerce and clients. Ethical indeterminacy suggests that where different courses of action could each be said to benefit the client, the lawyer will tend to advise the client to decide in the lawyer's own interests. Ethical indeterminacy is mediated by a range of competing conceptions of 'quality' and 'need'. The paper goes on to question the very distinction between 'supply' and 'demand' in the provision of legal services

History-sensitive versus future-sensitive approaches to security in distributed systems

We consider the use of aspect-oriented techniques as a flexible way to deal with security policies in distributed systems. Recent work suggests to use aspects for analysing the future behaviour of programs and to make access control decisions based on this; this gives the flavour of dealing with information flow rather than mere access control. We show in this paper that it is beneficial to augment this approach with history-based components as is the traditional approach in reference monitor-based approaches to mandatory access control. Our developments are performed in an aspect-oriented coordination language aiming to describe the Bell-LaPadula policy as elegantly as possible. Furthermore, the resulting language has the capability of combining both history- and future-sensitive policies, providing even more flexibility and power.Comment: In Proceedings ICE 2010, arXiv:1010.530

Stable isotopes can be used to infer the overwintering locations of prebreeding marine birds in the Canadian Arctic

Although assessments of winter carryover effects on fitness-related breeding parameters are vital for determining the links between environmental variation and fitness, direct methods of determining overwintering distributions (e.g., electronic tracking) can be expensive, limiting the number of individuals studied. Alternatively, stable isotope analysis in specific tissues can be used as an indirect means of determining individual overwintering areas of residency. Although increasingly used to infer the overwintering distributions of terrestrial birds, stable isotopes have been used less often to infer overwintering areas of marine birds. Using Arctic-breeding common eiders, we test the effectiveness of an integrated stable isotope approach (13-carbon, 15-nitrogen, and 2-hydrogen) to infer overwintering locations. Knowing the overwinter destinations of eiders from tracking studies at our study colony at East Bay Island, Nunavut, we sampled claw and blood tissues at two known overwintering locations, Nuuk, Greenland, and Newfoundland, Canada. These two locations yielded distinct tissue-specific isotopic profiles. We then compared the isotope profiles of tissues collected from eiders upon their arrival at our breeding colony, and used a k-means cluster analysis approach to match arriving eiders to an overwintering group. Samples from the claws of eiders were most effective for determining overwinter origin, due to this tissue\u27s slow growth rate relative to the 40-day turnover rate of blood. Despite taking an integrative approach using multiple isotopes, k-means cluster analysis was most effective when using 13-carbon alone to assign eiders to an overwintering group. Our research demonstrates that it is possible to use stable isotope analysis to assign an overwintering location to a marine bird. There are few examples of the effective use of this technique on a marine bird at this scale; we provide a framework for applying this technique to detect changes in the migration phenology of birds\u27 responses to rapid changes in the Arctic

A Hidden Markov Movement Model for rapidly identifying behavioral states from animal tracks

Electronic telemetry is frequently used to document animal movement through time. Methods that can identify underlying behaviors driving specific movement patterns can help us understand how and why animals use available space, thereby aiding conservation and management efforts. For aquatic animal tracking data with significant measurement error, a Bayesian state‐space model called the first‐Difference Correlated Random Walk with Switching (DCRWS) has often been used for this purpose. However, for aquatic animals, highly accurate tracking data are now becoming more common. We developed a new hidden Markov model (HMM) for identifying behavioral states from animal tracks with negligible error, called the hidden Markov movement model (HMMM). We implemented as the basis for the HMMM the process equation of the DCRWS, but we used the method of maximum likelihood and the R package TMB for rapid model fitting. The HMMM was compared to a modified version of the DCRWS for highly accurate tracks, the DCRWS [Formula: see text] , and to a common HMM for animal tracks fitted with the R package moveHMM. We show that the HMMM is both accurate and suitable for multiple species by fitting it to real tracks from a grey seal, lake trout, and blue shark, as well as to simulated data. The HMMM is a fast and reliable tool for making meaningful inference from animal movement data that is ideally suited for ecologists who want to use the popular DCRWS implementation and have highly accurate tracking data. It additionally provides a groundwork for development of more complex modeling of animal movement with TMB. To facilitate its uptake, we make it available through the R package swim

Vibrational Study of 13C-enriched C60 Crystals

The infrared (IR) spectrum of solid C60 exhibits many weak vibrational modes. Symmetry breaking due to 13C isotopes provides a possible route for optically activating IR-silent vibrational modes. Experimental spectra and a semi-empirical theory on natural abundance and 13C-enriched single crystals of C60 are presented. By comparing the experimental results with the theoretical results, we exclude this isotopic activation mechanism from the explanation for weakly active fundamentals in the spectra.Comment: Accepted for Phys. Rev. B, typeset in REVTEX v3.0 in LaTeX. Postscript file including figures is available at http://insti.physics.sunysb.edu/~mmartin/papers/c13twocol2.ps File with figures will be e-mailed by reques

Radiating dipoles in photonic crystals

The radiation dynamics of a dipole antenna embedded in a Photonic Crystal are modeled by an initially excited harmonic oscillator coupled to a non--Markovian bath of harmonic oscillators representing the colored electromagnetic vacuum within the crystal. Realistic coupling constants based on the natural modes of the Photonic Crystal, i.e., Bloch waves and their associated dispersion relation, are derived. For simple model systems, well-known results such as decay times and emission spectra are reproduced. This approach enables direct incorporation of realistic band structure computations into studies of radiative emission from atoms and molecules within photonic crystals. We therefore provide a predictive and interpretative tool for experiments in both the microwave and optical regimes.Comment: Phys. Rev. E, accepte