Applications of Additive Manufacturing Techniques in Making Energetic Materials

Energetic materials are currently manufactured using methods such as casting, which can only produce certain geometries. Additive manufacturing enables more flexible fabrication and the potential for improved material consistency. Additive manufacturing has transformed many industries, but has only recently been applied to the manufacturing of energetic materials. This paper describes the development of two processes to apply additive manufacturing methods to energetic materials. Method one applies a fused deposition modelling approach (FDM). 5 µm aluminum powder and PVDF were mixed and made into filaments using a Filabot Original filament extruder. Energetic filaments were created composed of 90:10, 80:20, and 75:25 mixtures of PVDF:Al by mass. These filaments had reactive sections, but did not have consistent composition and could not sustain self-propagating reactions. The second method had the goal of mixing ammonium perchlorate (AP) into a curable polymer which solidifies under UV light. Powdered sugar was used in place of AP to simulate the viscosity while testing extrusion and printing capabilities. The powdered sugar and UV Cure mixture could be extruded using a syringe pump when the powdered sugar to UV Cure ratio was 3:1, but this mixture would not stick to the print bed. Both processes need refinement to produce functional energetic materials. This paper forms a foundation for further development of processes in which additive manufacturing can be safely used to produce energetic materials

Endocrine responses to overreaching before and after 1 year of weightlifting

This is the publisher's version, also found at http://ehis.ebscohost.com/ehost/external?sid=c58e4c93-cdad-411e-8971-ff871436da4b%40sessionmgr14&vid=3&hid=1

Effects of Different Number of Sets of Resistance Training on Flexibility

International Journal of Exercise Science 10(3): 354-364, 2017. The aim of this study was to investigate the effects of six months of training with three different number of sets of resistance training on flexibility in young men. Forty-seven men (mean ± SD age = 24 ± 1yrs; body mass = 79.39 ± 9.12 kg; height = 174.5 ± 5.6 cm) were randomly divided into three training groups performing either one set (G1S), three sets (G3S), or five sets (G5S) of all exercises in a resistance training session or a control group (CG). All groups were assessed pre- and post-training for Sit-and-Reach test and range of motion of 10 joints using goniometry. The training protocol included three weekly sessions and was composed of nine exercises performed at a moderate intensity (eight to 12RM). The results demonstrated significant differences pre- to post-training for the Sit-and-Reach test for all training groups; however, only the G5S showed significant differences when compared to the CG (31.04 ± 5.94cm vs. 23.56 ± 6.76cm, respectively; p \u3c 0.05). Of the ten joint movements measured, there were range of motion increases only to shoulder flexion (G1S), shoulder extension (G3S), elbow flexion (G3S), and knee flexion (G3S) when comparing pre- to post-training (p \u3c 0.05). In conclusion, different resistance training volumes improved flexibility for some joints of young men. These findings indicate that performing only resistance training can result in increases in flexibility

SecureMEMS: Selective Deposition of Energetic Materials

There exists a pressing operational need to secure and control access to high-valued electromechanical systems, and in some cases render them inoperable. Developing a reliable method for depositing energetic materials will allow for the near-seamless integration of electromechanical systems and energetic material, and, in turn, provide the pathway for security and selective destruction that is needed. In this work, piezoelectric inkjet printing was used to selectively deposit energetic materials. Nanothermites, comprising of nanoscale aluminum and nanoscale copper oxide suspended in dimethyl-formamide (DMF), were printed onto silicon wafers, which enabled both thermal and thrust measurements of the decomposing energetic material. Various solids loadings were studied in order to optimize printing characteristics. Going forward, further studies will focus on the plausibility of inkjet printing other energetic materials for the purposes of the degradation of electromechanical systems

Borromean Binding of Three or Four Bosons

We estimate the ratio $R=g_{3}/g_{2}$ of the critical coupling constants $g_{2}$ and $g_{3}$ which are required to achieve binding of 2 or 3 bosons, respectively, with a short-range interaction, and examine how this ratio depends on the shape of the potential. Simple monotonous potentials give $R\simeq 0.8$. A wide repulsive core pushes this ratio close to R=1. On the other hand, for an attractive well protected by an external repulsive barrier, the ratio approaches the rigorous lower bound $R=2/3$. We also present results for N=4 bosons, sketch the extension to $N>4$, and discuss various consequences.Comment: 12 pages, RevTeX, 5 Figures in tex include

Genomic insights into rapid speciation within the world’s largest tree genus Syzygium

Species radiations, despite immense phenotypic variation, can be difficult to resolve phylogenetically when genetic change poorly matches the rapidity of diversification. Genomic potential furnished by palaeopolyploidy, and relative roles for adaptation, random drift and hybridisation in the apportionment of genetic variation, remain poorly understood factors. Here, we study these aspects in a model radiation, Syzygium, the most species-rich tree genus worldwide. Genomes of 182 distinct species and 58 unidentified taxa are compared against a chromosome-level reference genome of the sea apple, Syzygium grande. We show that while Syzygium shares an ancient genome doubling event with other Myrtales, little evidence exists for recent polyploidy events. Phylogenomics confirms that Syzygium originated in Australia-New Guinea and diversified in multiple migrations, eastward to the Pacific and westward to India and Africa, in bursts of speciation visible as poorly resolved branches on phylogenies. Furthermore, some sublineages demonstrate genomic clines that recapitulate cladogenetic events, suggesting that stepwise geographic speciation, a neutral process, has been important in Syzygium diversification

Strength and hypertrophy responses to constant and decreasing rest intervals in trained men using creatine supplementation

<p>Abstract</p> <p>Background</p> <p>The purpose of the current study was to compare strength and hypertrophy responses to resistance training programs that instituted constant rest intervals (CI) and decreasing rest intervals (DI) between sets over the course of eight weeks by trained men who supplemented with creatine monohydrate (CR).</p> <p>Methods</p> <p>Twenty-two recreationally trained men were randomly assigned to a CI group (n = 11; 22.3 ± 1 years; 77.7 ± 5.4 kg; 180 ± 2.2 cm) or a DI group (n = 11; 22 ± 2.5 years; 75.8 ± 4.9 kg; 178.8 ± 3.4 cm). Subjects in both groups supplemented with CR; the only difference between groups was the rest interval instituted between sets; the CI group used 2 minutes rest intervals between sets and exercises for the entire 8-weeks of training, while the DI group started with a 2 minute rest interval the first two weeks; after which the rest interval between sets was decreased 15 seconds per week (i.e. 2 minutes decreasing to 30 seconds between sets). Pre- and post-intervention maximal strength for the free weight back squat and bench press exercises and isokinetic peak torque were assessed for the knee extensors and flexors. Additionally, muscle cross-sectional area (CSA) of the right thigh and upper arm was measured using magnetic resonance imaging.</p> <p>Results</p> <p>Both groups demonstrated significant increases in back squat and bench press maximal strength, knee extensor and flexor isokinetic peak torque, and upper arm and right thigh CSA from pre- to post-training (p ≤ 0.0001); however, there were no significant differences between groups for any of these variables. The total volume for the bench press and back squat were significantly greater for CI group versus the DI group.</p> <p>Conclusions</p> <p>We report that the combination of CR supplementation and resistance training can increase muscular strength, isokinetic peak torque, and muscle CSA, irrespective of the rest interval length between sets. Because the volume of training was greater for the CI group versus the DI group, yet strength gains were similar, the creatine supplementation appeared to bolster adaptations for the DI group, even in the presence of significantly less volume. However, further research is needed with the inclusion of a control group not receiving supplementation combined and resistance training with decreasing rest intervals to further elucidate such hypotheses.</p

Genomic insights into rapid speciation within the world's largest tree genus Syzygium

The relative importance of the mechanisms underlying species radiation remains unclear. Here, the authors combine reference genome assembly and population genetics analyses to show that neutral forces have contributed to the radiation of the most species-rich tree genus Syzygium. Species radiations, despite immense phenotypic variation, can be difficult to resolve phylogenetically when genetic change poorly matches the rapidity of diversification. Genomic potential furnished by palaeopolyploidy, and relative roles for adaptation, random drift and hybridisation in the apportionment of genetic variation, remain poorly understood factors. Here, we study these aspects in a model radiation, Syzygium, the most species-rich tree genus worldwide. Genomes of 182 distinct species and 58 unidentified taxa are compared against a chromosome-level reference genome of the sea apple, Syzygium grande. We show that while Syzygium shares an ancient genome doubling event with other Myrtales, little evidence exists for recent polyploidy events. Phylogenomics confirms that Syzygium originated in Australia-New Guinea and diversified in multiple migrations, eastward to the Pacific and westward to India and Africa, in bursts of speciation visible as poorly resolved branches on phylogenies. Furthermore, some sublineages demonstrate genomic clines that recapitulate cladogenetic events, suggesting that stepwise geographic speciation, a neutral process, has been important in Syzygium diversification.Peer reviewe

Genomic insights into rapid speciation within the world's largest tree genus Syzygium

Acknowledgements Y.W.L. was supported by a postgraduate scholarship research grant from the Ministry of National Development, Singapore awarded through the National Parks Board, Singapore (NParks; NParks’ Garden City Fund). Principal research funding from NParks and the School of Biological Sciences (SBS), Nanyang Technological University (NTU), Singapore, is acknowledged. We thank Peter Preiser, Associate Vice President for Biomedical and Life Sciences, for facilitating NTU support, and Kenneth Er, CEO of NParks, for facilitating research funding through that organisation. V.A.A. and C.L. were funded by SBS, NTU for a one-year research leave. V.A.A. and C.L. also acknowledge support from the United States National Science Foundation (grants 2030871 and 1854550, respectively). S.R. was supported by a postdoctoral research fellowship under the NTU Strategic Plant Programme. S.R. and N.R.W.C. acknowledge funding from NTU start-up and the Academy of Finland (decisions 318288, 319947) grants to J.S. Fieldwork conducted by Y.W.L. was supported by an Indonesian Government RISTEK research permit (Application ID: 1517217008) and an Access License from the Sabah State government [JKM/MBS.1000-2/2JLD.7(84)]. T.N.C.V. is grateful to the Assemblée de la Province Nord and Assemblée de la Province Sud (New Caledonia) for facilitating relevant collection permits. A.N. was partly supported by the Research Project Promotion Grant (Strategic Research Grant No. 17SP01302) from the University of the Ryukyus, and partly by the Environment Research and Technology Development Fund (JPMEERF20204003) from the Environmental Restoration and Conservation Agency of Japan. Fieldwork in Fiji conducted by R.B. was hosted and facilitated by Elina Nabubuniyaka-Young (The Pacific Community’s Centre for Pacific Crops and Trees, Fiji). We thank the NTU-Smithsonian Partnership for tree data obtained for the Bukit Timah Nature Reserve (BTNR) long-term forest dynamics plots. Administrative support provided by Mui Hwang Khoo-Woon and Peter Ang at the molecular laboratory of the Singapore Botanic Gardens (SBG) is acknowledged. Rosie Woods and Imalka Kahandawala (DNA and Tissue Bank, Royal Botanic Gardens, Kew) facilitated additional DNA samples. Daniel Thomas (SBG) and Yan Yu (Sichuan University) commented on biogeographical analyses. NovogeneAIT in Singapore is acknowledged for personalised sequencing service.Peer reviewedPublisher PD

Thrive: Success Strategies for the Modern-Day Faculty Member

The THRIVE collection is intended to help faculty thrive in their roles as educators, scholars, researchers, and clinicians. Each section contains a variety of thought-provoking topics that are designed to be easily digested, guide personal reflection, and put into action. Please use the THRIVE collection to help: Individuals study topics on their own, whenever and wherever they want Peer-mentoring or other learning communities study topics in small groups Leaders and planners strategically insert faculty development into existing meetings Faculty identify campus experts for additional learning, grand rounds, etc. If you have questions or want additional information on a topic, simply contact the article author or email [email protected]://digitalcommons.unmc.edu/facdev_books/1000/thumbnail.jp