Low loss coatings for the VIRGO large mirrors

présentée par L. PinardThe goal of the VIRGO program is to build a giant Michelson type interferometer (3 kilometer long arms) to detect gravitational waves. Large optical components (350 mm in diameter), having extremely low loss at 1064 nm, are needed. Today, the Ion beam Sputtering is the only deposition technique able to produce optical components with such performances. Consequently, a large ion beam sputtering deposition system was built to coat large optics up to 700 mm in diameter. The performances of this coater are described in term of layer uniformity on large scale and optical losses (absorption and scattering characterization). The VIRGO interferometer needs six main mirrors. The first set was ready in June 2002 and its installation is in progress on the VIRGO site (Italy). The optical performances of this first set are discussed. The requirements at 1064 nm are all satisfied. Indeed, the absorption level is close to 1 ppm (part per million), the scattering is lower than 5 ppm and the R.M.S. wavefront of these optics is lower than 8 nm on 150 mm in diameter. Finally, some solutions are proposed to further improve these performances, especially the absorption level (lower than 0.1 ppm) and the mechanical quality factor Q of the mirrors (thermal noise reduction)

Virgo gravitational wave detector: Results and perspectives

The Virgo detector reached during the past science run a sensitivity very close to the design one. During the last year the detector has been improved by suspending the main interferometer mirrors with monolithic fibers, with the goal of reducing the thermal noise contribution and testing the new technology. At the same time the design of the next detector improvements are on-going and they will be implemented during the construction of Advanced Virgo

Search for gravitational-lensing signatures in the full third observing run of the LIGO-Virgo network

Gravitational lensing by massive objects along the line of sight to the source causes distortions of gravitational wave-signals; such distortions may reveal information about fundamental physics, cosmology and astrophysics. In this work, we have extended the search for lensing signatures to all binary black hole events from the third observing run of the LIGO--Virgo network. We search for repeated signals from strong lensing by 1) performing targeted searches for subthreshold signals, 2) calculating the degree of overlap amongst the intrinsic parameters and sky location of pairs of signals, 3) comparing the similarities of the spectrograms amongst pairs of signals, and 4) performing dual-signal Bayesian analysis that takes into account selection effects and astrophysical knowledge. We also search for distortions to the gravitational waveform caused by 1) frequency-independent phase shifts in strongly lensed images, and 2) frequency-dependent modulation of the amplitude and phase due to point masses. None of these searches yields significant evidence for lensing. Finally, we use the non-detection of gravitational-wave lensing to constrain the lensing rate based on the latest merger-rate estimates and the fraction of dark matter composed of compact objects

Search for eccentric black hole coalescences during the third observing run of LIGO and Virgo

Despite the growing number of confident binary black hole coalescences observed through gravitational waves so far, the astrophysical origin of these binaries remains uncertain. Orbital eccentricity is one of the clearest tracers of binary formation channels. Identifying binary eccentricity, however, remains challenging due to the limited availability of gravitational waveforms that include effects of eccentricity. Here, we present observational results for a waveform-independent search sensitive to eccentric black hole coalescences, covering the third observing run (O3) of the LIGO and Virgo detectors. We identified no new high-significance candidates beyond those that were already identified with searches focusing on quasi-circular binaries. We determine the sensitivity of our search to high-mass (total mass M>70 M⊙) binaries covering eccentricities up to 0.3 at 15 Hz orbital frequency, and use this to compare model predictions to search results. Assuming all detections are indeed quasi-circular, for our fiducial population model, we place an upper limit for the merger rate density of high-mass binaries with eccentricities 0<e≤0.3 at 0.33 Gpc−3 yr−1 at 90\% confidence level

Ultralight vector dark matter search using data from the KAGRA O3GK run

Among the various candidates for dark matter (DM), ultralight vector DM can be probed by laser interferometric gravitational wave detectors through the measurement of oscillating length changes in the arm cavities. In this context, KAGRA has a unique feature due to differing compositions of its mirrors, enhancing the signal of vector DM in the length change in the auxiliary channels. Here we present the result of a search for U(1)B−L gauge boson DM using the KAGRA data from auxiliary length channels during the first joint observation run together with GEO600. By applying our search pipeline, which takes into account the stochastic nature of ultralight DM, upper bounds on the coupling strength between the U(1)B−L gauge boson and ordinary matter are obtained for a range of DM masses. While our constraints are less stringent than those derived from previous experiments, this study demonstrates the applicability of our method to the lower-mass vector DM search, which is made difficult in this measurement by the short observation time compared to the auto-correlation time scale of DM

Thermal noise study of a radiation pressure noise limited optical cavity with fused silica mirror suspensions

In this work we study the thermal noise of two monolithically suspended mirrors in a tabletop high-finesse optical cavity. We show that, given suitable seismic filters, such a cavity can be designed to be sensitive to quantum radiation pressure fluctuations in the audio band of gravitational wave interferometric detectors below 1 kHz. Indeed, the thermal noise of the suspensions and of the coatings constitutes the main limit to the observation of quantum radiation pressure fluctuations. This limit can be overcome with an adequate choice of mirror suspension and coating parameters. Finally, we propose to combine two optical cavities, like those modeled in this work, to obtain a tabletop quantum radiation pressure-limited interferometer

Cosmic Ray Spectra near the LISA Orbit

Cosmic-ray particles traverse the LISA apparatus charging the proof masses. This process causes spurious Coulomb forces between the test masses and the surrounding conducting surfaces mimicking gravitational wave signals. Approximately 13 g cm(-2) of matter overlies the proof masses. The nucleonic component of cosmic rays (about 99% of the total) below 100 MeV/n stops inside the spacecraft without reaching the masses. It is of major importance to determine the primary and solar cosmic-ray particle fluxes above this energy near the LISA orbit in order to predict the effect on the apparatus

Simulation of charging process of the LISA test masses due to solar flares

Cosmic-ray and solar particles above 100 MeV penetrate the LISA experiment test masses. Consequently, electric charges accumulating there generate spurious Coulomb forces between the masses and the surrounding electrodes. This process increments the noise level of the experiment. We have estimated the amount of charge deposited per second on the LISA test masses by primary cosmic-ray protons at solar minimum and solar maximum and by solar energetic particle (SEP) events. This simulation has been carried out with the Fluka Monte Carlo program. A simplified geometry for the experiment has been considered. We have found an effective charge rate of 110 e s−1 for primary protons at solar maximum and 150 e s−1 at solar minimum between 0.1 and 1000 GeV. The amount of charge released by a medium intensity gradual event (7 May 1978) varies from 206 e s−1 in the first few minutes to 4575 e s−1 at the peak of the event. At the occurrence of medium or strong solar events, the LISA sensitivity curve at frequencies lower than 3 × 10−4 Hz is dominated by the noise due to the test-mass charging process