Raman spectroscopy of iodine-doped double-walled carbon nanotubes

We present a Raman spectroscopy study of iodine-intercalated (p-type-doped) double-walled carbon nanotubes. Double-walled carbon nanotubes (DWCNTs) are synthesized by catalytic chemical vapor deposition and characterized by Raman spectroscopy. The assignment of the radial breathing modes and the tangential modes of pristine DWCNTs is done in the framework of the bond polarization theory, using the spectral moment method. The changes in the Raman spectrum upon iodine doping are analyzed. Poly-iodine anions are identi- fied, and the Raman spectra reveal that the charge transfer between iodine and DWCNTs only involves the outer tubes

Impact of the surface roughness on the electrical capacitance

A new hybrid approach consists to use the advantages of both systems namely the high geometric aspects of the electrodes of the ultracapacitor and the high dielectric strength of polymer materials used in dielectric capacitors. The surface roughness of the electrodes of the ultracapacitor is manufactured with nano-porous materials; activated carbon and carbon nanotubes (CNTs). Many compositions of both carbonaceous materials are tested with different insulating materials (liquid and solid) to constitute the hybrid capacitor. It appears that the capacitance increases with the carbonaceous composition: An increasing from 15 to 40% is observed as compared to a plane capacitor, it can be twice with a 100 wt% of CNTs content. But, the impregnation of the insulating material in the surface roughness remains the key point of the realization of the hybrid capacitor. The roughness accessibility is a major property to optimize in order to improve the impregnation of the insulating material to increase the electrical capacitance

First Principles Study of Work Functions of Double Wall Carbon Nanotubes

Using first-principles density functional calculations, we investigated work functions (WFs) of thin double-walled nanotubes (DWNTs) with outer tube diameters ranging from 1nm to 1.5nm. The results indicate that work function change within this diameter range can be up to 0.5 eV, even for DWNTs with same outer diameter. This is in contrast with single-walled nanotubes (SWNTs) which show negligible WF change for diameters larger than 1nm. We explain the WF change and related charge redistribution in DWNTs using charge equilibration model (CEM). The predicted work function variation of DWNTs indicates a potential difficulty in their nanoelectronic device applications.Comment: 11 pages, 3 figures, to appear as rapid communication on Physical Review

Writing Electronic Devices on Paper with Carbon Nanotube Ink

The normal paper used in any printer is among the cheapest flexible organic materials that exist. We demonstrate that we can print on paper high-frequency circuits tunable with an applied dc voltage. This is possible with the help of an ink containing functionalized carbon nanotubes and water. After the water is evaporated from the paper, the nanotubes remain steadily imprinted on paper, showing a semiconducting behaviour and tunable electrical properties

Mössbauer Spectroscopy Involved in the Study of the Catalytic Growth of Carbon Nanotubes

Single-walled and thin multiwalled carbon nanotubes are prepared by a catalytic-chemical-vapor-deposition method involving the simultaneous formation of Fe or Co nanometric particles from oxide solid solutions based on Al2O3, MgAl2O4 or MgO. This paper is an overview of the authors’ work on the characterization by Mössbauer spectroscopy used in complement to electron microscopy and specific-surface-area measurements. It is notably attempted to correlate the nature of the different iron phases in the carbon nanotube-metal-oxide powders with the formation mechanisms of the nanotubes. Massive composites and hydrogen storage are proposed as possible applications

Experimental determination of microwave attenuation and electrical permittivity of double-walled carbon nanotubes

The attenuation and the electrical permittivity of the double-walled carbon nanotubes (DWCNTs) were determined in the frequency range of 1–65 GHz. A micromachined coplanar waveguide transmission line supported on a Si membrane with a thickness of 1.4 µm was filled with a mixture of DWCNTs. The propagation constants were then determined from the S parameter measurements. The DWCNTs mixture behaves like a dielectric in the range of 1–65 GHz with moderate losses and an abrupt change of the effective permittivity that is very useful for gas sensor detection. ©2006 American Institute of Physic

Fe/Co Alloys for the Catalytic Chemical Vapor Deposition Synthesis of Single- and Double-Walled Carbon Nanotubes (CNTs). 2. The CNT−Fe/Co−MgAl2O4 System

A detailed 57Fe Mössbauer study of the Mg(0.8)Fe(0.2-y)Co(y)Al2O4 (y = 0, 0.05, 0.1, 0.15, 0.2) solid solutions and of the CNT-Fe/Co-MgAl2O4 nanocomposite powders prepared by reduction in H2-CH4 has allowed characterization of the different iron phases involved in the catalytic process of carbon nanotube (CNT) formation and to correlate these results with the carbon and CNT contents. The oxide precursors consist of defective spinels of general formulas (Mg(1-x-y)(2+)Fe(x-3alpha)(2+)Fe(2alpha)(3+)[symbol: see text](alpha)Co(y)(2+)Al2(3+))O4(2-) . The metallic phase in the CNT-Fe/Co-MgAl2O4 nanocomposite powders is mostly in the form of the ferromagnetic alpha-Fe/Co alloy with the desired composition. For high iron initial proportions, the additional formation of Fe3C and gamma-Fe-C is observed while for high cobalt initial proportions, the additional formation of a gamma-Fe/Co-C phase is favored. The higher yield of CNTs is observed for postreaction alpha-Fe(0.50)Co(0.50) catalytic particles, which form no carbide and have a narrow size distribution. Alloying is beneficial for this system with respect to the formation of CNTs

Pressure dependence of Raman modes in double wall carbon nanotubes filled with α-Fe.

The preparation of highly anisotropic one-dimensional (1D) structures confined into carbon nanotubes (CNTs) in general is a key objective in CNTs research. In this work, the capillary effect was used to fill double wall carbon nanotubes with iron. The samples are characterized by Mössbauer and Raman spectroscopy, transmission electron microscopy, scanning area electron diffraction, and magnetization. In order to investigate their structural stability and compare it with that of single wall carbon nanotubes (SWNTs), elucidating the differences induced by the inner-outer tube interaction, unpolarized Raman spectra of tangential modes of double wall carbon nanotubes (DWNTs) filled with 1D nanocrystallin α-Fe excited with 514 nm were studied at room temperature and elevated pressure. Up to 16 GPa we find a pressure coefficient for the internal tube of 4.3 cm−1 GPa−1 and for the external tube of 5.5 cm−1 GPa−1. In addition, the tangential band of the external and internal tubes broadens and decreases in amplitude. All findings lead to the conclusion that the outer tube acts as a protection shield for the inner tubes (at least up 16 GPa). Structural phase transitions were not observed in this range of pressure