Thickness and uniformity characterization of thin targets for intense ion beam experiments

The NUMEN Experiment aims to get information on the Nuclear Matrix Elements of the Neutrinoless Double Beta Decay, by measuring heavyion induced Double Charge Exchange (DCE) reactions cross sections. A good energy resolution is needed to clearly distinguish energy states of DCE products. To measure the energy of reaction products with the required resolution, the target must be thin and uniform to minimise dispersion and straggling effects on the ejectile energy. Few hundreds of nanometers of the target isotope are deposited on a Highly Oriented Pyrolytic Graphite substrate a few micrometers thick. The results of the characterisation of the first target prototypes of tin and tellurium are presented. The Scanning Electron Microscopy was used to qualitatively analyse the samples surface. A setup to study Alpha Particle Transmission has been assembled to measure thickness and uniformity of the targets; the thickness results have been verified by the Rutherford Backscattering measurements. To evaluate the effects of the thickness on the resolution of the DCE products energy, a Monte Carlo code has been implemented, using the measured thickness and uniformity as input data for the simulation

Tests of a cooling system for thin targets submitted to intense ion beams for the numen experiment

The NUMEN experiment, hosted at LNS (Catania, Italy), aims to determine the Nuclear Matrix Elements (NMEs) involved in 0β β decay via heavy-ion induced Double Charge Exchange (DCE) reactions. High intensity beams of about 50 μA and of energies ranging from 15 to 60 MeV/u are necessary, due to the low DCE cross sections and the use of very thin targets (several hundreds of nm) needed to reach the required energy resolution. These intense beams produce a considerable amount of heat inside the target, which can be dissipated by depositing the targets on a highly thermally conductive substrate, HOPG (Highly Oriented Pyrolytic Graphite), and coupling it with a suitable designed target-cooler system. The heat transfer from the beam spot to the cold region has been studied by solving numerically the heat equation to determine the evolution in space and time of the temperature inside the target. According to calculations, the temperatures of most of the target isotopes remain under the melting points. Experimental tests with a laser were initiated to validate the whole cooling system and the calculations

Evaluation of target non-uniformity and dispersion effects on energy measurement resolution in NUMEN experiment

In the NUMEN Experiment, Double Charge Exchange (DCE) reactions will be studied to get very precise measurements of their cross sections and final state levels. The interest for these reactions lies in the possibility for some nuclides to have DCE with initial and final states identical to those of the Neutrinoless Double β-Decay. To reach a good precision in the energy measurements, high statistics is needed and severe constraints about the target thickness must be satisfied. A 50 μA intense ion beam will provide the desired statistics, while posing the problem of dissipating the massive heat generated in the target. It is therefore necessary to design a suitable cooling system, which must affect the particles' energy as little as possible. Said energy is already influenced by the current setup. The Superconducting Cyclotron (SC) and the MAGNEX Spectrometer introduce an error on the particles' energy by 1/1000th (FWHM value) of its average energy. In the target, the main sources of error are straggling of projectiles and reaction products, and the dispersion effect. Both closely depend on the target thickness, which must be of the order of few hundred nanometres. In addition, the two effects are worsened if the target thickness is not uniform. The solution to these problems has been found by backing the target isotope with relatively thin substrate of Highly Oriented Pyrolytic Graphite (HOPG). Its thermodynamic properties fit the cooling requirements and can be as thin as 450 μg cm-2. The further straggling suffered by the ejectiles is tolerable, falling within the resolution requirements. Samples are deposited by using Electron Beam Evaporation: results obtained for Sn and Te are checked by Scanning Electron Microscopy (SEM). A quantitative evaluation of the samples' thickness has been performed by Alpha-Particle Transmission (APT) and Rutherford Backscattering Spectrometry (RBS) measurements. A Monte Carlo code has been implemented to estimate the ejectiles energy distribution using the experimental measurements as input. Results from characterization and simulations help in optimizing the target thickness and the energy resolution of reaction products

The Intersection of GERD, Aspiration, and Lung Transplantation

Lung transplantation is a radical but life-saving treatment option for patients with end-stage lung diseases, such as idiopathic pulmonary fibrosis (IPF) and scleroderma. In light of the proposed association and controversy linking gastroesophageal reflux disease (GERD) to IPF and lung transplant outcome, the American Gastroenterological Association convened during the DDW in Washington in May 2015 a multidisciplinary group of experts in the field of GERD and lung transplantation to make considerations about the care of these patients based on available data and subsequent expert panel discussion at this symposium. The following topics were discussed: (1) pathophysiology of GERD-induced pulmonary symptoms, (2) GERD evaluation before and after lung transplantation, (3) outcome of lung transplantation for IPF and scleroderma, and (4) role of laparoscopic fundoplication before or after lung transplantation

Effects of coupling to breakup in the 6,7 Li + 64 Zn systems at near-barrier energies

Elastic scattering angular distributions for the weakly bound nucleus Li7 on Zn64 have been measured in a wide angular range at energies around the Coulomb barrier. The present experimental data and our previously measured elastic scattering data for the system Li6+Zn64 have been analyzed within the continuum-discretized coupled-channels method, where the resonant and nonresonant states of the projectile are taken into account. In this theoretical framework, we have also analyzed our previously measured excitation functions of elastic scattering at backward angles and the corresponding barrier distributions for the same systems. A good agreement between the experimental data and the calculations has been observed. The obtained results, besides confirming the importance of the coupling to the breakup channels in collisions with weakly bound nuclei, show that, in the case of Li6, the inclusion of the resonant states of the projectile produces non-negligible effects.Ministerio de Economía y Competitividad (España) FIS2013-41994-PJunta de Andalucía FQM160 P07-FQM-02894Programa Consolider-Ingenio 2010 (España) CSD2007-0004

Coupling to continuum effects in the 6,7Li +64Zn reactions at energies around the Coulomb barrier

The elastic scattering angular distributions for the weakly bound nuclei 6Li and 7Li on 64Zn were measured in a wide angular range at energies around the Coulomb barrier. In addition, the excitation functions of quasi-elastic scattering at backward angles were measured and the corresponding barrier distributions were derived. The experimental data were analysed within the continuum-discretized-coupled-channel method. In this contribution, we will present a detailed study concerning the effects of the break-up channels in the 6,7Li +64 Zn reactions

Halo effects on fusion cross section in 4,6He+64Zn collision around and below the Coulomb barrier

The structure of the halo nuclei is expected to influence the fusion mechanism at energies around and below the Coulomb barrier. Here new data of 4He+64Zn at sub-barrier energies are presented which cover the same energy region of previous measurements of 6He+64Zn. The fusion cross section was measured by using an activation technique where the radioactive evaporation residues produced in the reaction were identified by the X-ray emission which follows their electron capture decay. By comparing the two system, we observe an enhancement on the fusion cross section in the reaction induced by 6He, at energy below the Coulomb barrier. It is shown that this enhancement seems to be due to static properties of halo 2n 6He nucleus

Quasielastic backscattering and barrier distributions for the 6, 7Li + 64Zn systems

Excitation functions of quasielastic scattering at backward angles were measured for the weakly bound 6Li and 7Li projectiles on a 64Zn target at energies around the Coulomb barrier. The corresponding barrier distributions were derived from the experimental cross sections. The experimental data were analyzed within the coupled-channel model using a double-folding potential as the bare potential. Inelastic excitations of the target, the 7Li first excited state, and 6Li, 7Li resonant state(s), corresponding to sequential breakup, were included in the calculations. The comparison between the data and coupled-channel predictions shows that the effects of channels not included in the calculations, such as direct breakup and transfers, are much larger for 6Li than for 7Li

Enhancement in the 6He+64Zn fusion cross section at energies around the barrier: static or dynamic effect?

A new measurement of fusion cross-section for the system 4 He+64 Zn was performed at sub-barrier energy in order to cover the same energy region of previous measurements of 6 He+64 Zn. The fusion cross-section was obtained using an activation technique. From the comparison of the two excitation functions an enhancement of the fusion cross section was observed, at energy below the Coulomb barrier, in the reaction induced by 6 He in respect to the one induced by 4 He