Using coupled micropillar compression and micro-Laue diffraction to investigate deformation mechanisms in a complex metallic alloy Al13Co4

In this investigation, we have used in-situ micro-Laue diffraction combined with micropillar compression of focused ion beam milled Al13Co4 complex metallic alloy to study the evolution of deformation in Al13Co4. Streaking of the Laue spots showed that the onset of plastic flow occured at stresses as low as 0.8 GPa, although macroscopic yield only becomes apparent at 2 GPa. The measured misorientations, obtained from peak splitting, enabled the geometrically necessary dislocation density to be estimated as 1.1 x 1013 m-2

Core-Clickable PEG-Branch-Azide Bivalent-Bottle-Brush Polymers by ROMP: Grafting-Through and Clicking-To

The combination of highly efficient polymerizations with modular "click" coupling reactions has enabled the synthesis of a wide variety of novel nanoscopic tructures. Here we demonstrate the facile synthesis of a new class of clickable, branched nanostructures, polyethylene glycol (PEG)-branch-azide bivalent-brush polymers, facilitated by "graft-through" ring-opening metathesis polymerization of a branched norbornene-PEG-chloride macromonomer followed by halide-azide exchange. The resulting bivalent-brush polymers possess azide groups at the core near a polynorbornene backbone with PEG chains extended into solution; the structure resembles a unimolecular micelle. We demonstrate copper-catalyzed azide-alkre cycloaddition (CuAAC) "click-to" coupling of a photocleavable doxorubicin (DOX)-alkyne derivative to the azide core. The CuAAC coupling was quantitative across a wide range of nanoscopic sizes (similar to 6-similar to 50 nrn); UV photolysis of the resulting DOX-loaded materials yielded free DOX that was therapeutically effective against human cancer cells

Parasite species richness and its effect on persistence in food webs

Parasitic species are likely to have a significant effect on the stability of ecosystems. However, little is known of the nature of this effect, with debate over whether it is positive or negative. In previous work it was observed that a mixture of interaction types increases the local stability of a network. Following this, we investigate the consequences for species persistence of replacing host species with parasitic species. We consider systems with varying mixtures of mutualistic and antagonistic interactions, showing that the effect of parasitic interactions on a system depends on both the interaction types present and the levels of parasitism considered. Higher levels of mutualism make a system vulnerable to destabilisation on the addition of parasite species. However, for systems with antagonistic interactions, persistence in the system decreases primarily due to the failure of parasite species to persist. This increases with increasing proportions of parasite species, leading to a peak number of parasite species able to persist. Increasing parasite species richness does not have as significant an effect on host species richness as we might expect; although parasites have an important role to play in ecological networks, their effect on persistence is seen primarily through their own self-limitation

Scattering of terahertz radiation from oriented carbon nanotube films

We report on the use of terahertz time-domain spectroscopy to measure scattering from multi-walled carbon nanotubes aligned normal to the film plane. Measurements indicate scattering from the nanotubes is significantly stronger than for bulk metal

Virtual Texture Generated using Elastomeric Conductive Block Copolymer in Wireless Multimodal Haptic Glove.

Haptic devices are in general more adept at mimicking the bulk properties of materials than they are at mimicking the surface properties. This paper describes a haptic glove capable of producing sensations reminiscent of three types of near-surface properties: hardness, temperature, and roughness. To accomplish this mixed mode of stimulation, three types of haptic actuators were combined: vibrotactile motors, thermoelectric devices, and electrotactile electrodes made from a stretchable conductive polymer synthesized in our laboratory. This polymer consisted of a stretchable polyanion which served as a scaffold for the polymerization of poly(3,4-ethylenedioxythiophene) (PEDOT). The scaffold was synthesized using controlled radical polymerization to afford material of low dispersity, relatively high conductivity (0.1 S cm-1), and low impedance relative to metals. The glove was equipped with flex sensors to make it possible to control a robotic hand and a hand in virtual reality (VR). In psychophysical experiments, human participants were able to discern combinations of electrotactile, vibrotactile, and thermal stimulation in VR. Participants trained to associate these sensations with roughness, hardness, and temperature had an overall accuracy of 98%, while untrained participants had an accuracy of 85%. Sensations could similarly be conveyed using a robotic hand equipped with sensors for pressure and temperature

Data on a new beta titanium alloy system reinforced with superlattice intermetallic precipitates.

The data presented in this article are related to the research article entitled "a new beta titanium alloy system reinforced with superlattice intermetallic precipitates" (Knowles et al., 2018) [1]. This includes data from the as-cast alloy obtained using scanning electron microscopy (SEM) and x-ray diffraction (XRD) as well as SEM data in the solution heat treated condition. Transmission electron microscopy (TEM) selected area diffraction patterns (SADPs) are included from the alloy in the solution heat treated condition, as well as the aged condition that contained < 100 nm B2 TiFe precipitates [1], the latter of which was found to exhibit double diffraction owing to the precipitate and matrix channels being of a similar width to the foil thickness (Williams and Carter, 2009) [2]. Further details are provided on the macroscopic compression testing of small scale cylinders. Of the micropillar deformation experiment performed in [1], SEM micrographs of focused ion beam (FIB) prepared 2 µm micropillars are presented alongside those obtained at the end of the in-situ SEM deformation as well as videos of the in-situ deformation. Further, a table is included that lists the Schmidt factors of all the possible slip systems given the crystal orientations and loading axis of the deformed micropillars in the solution heat treated and aged conditions

Randomized trial of erlotinib plus whole-brain radiotherapy for NSCLC patients with multiple brain metastases

Background: Median survival of non-small cell lung cancer (NSCLC) patients with brain metastases is poor. We examined concurrent erlotinib and whole brain radiotherapy (WBRT) followed by maintenance erlotinib in patients with untreated brain metastases, given the potential radiosensitizing properties of erlotinib and its direct effect on brain metastases and systemic activity.Methods: Eighty NSCLC patients with KPS of 70 and greater and multiple brain metastases were randomly assigned to placebo (n = 40) or erlotinib (100mg, n = 40) given concurrently with WBRT (20 Gy in 5 fractions). Following WBRT, patients continued with placebo or erlotinib (150mg) until disease progression. The primary end point was neurological progression-free survival (nPFS); hazard ratios (HRs) were calculated using Cox regression. All P values were two-sided.Results: Fifteen patients (37.5%) from each arm were alive and without neurological progression 2 months after WBRT. Median nPFS was 1.6 months in both arms; nPFS HR 0.95 (95% CI = 0.59 to1.54; P = .84). Median overall survival (OS) was 2.9 and 3.4 months in the placebo and erlotinib arms; HR 0.95 (95% CI = 0.58 to 1.55; P = .83). The frequency of epidermal growth factor receptor (EGFR) mutations was low with only 1 of 35 (2.9%) patients with available samples had activating EGFR-mutations. Grade 3/4 adverse event rates were similar between the two groups (70.0% in each arm), except for rash 20.0% (erlotinib) vs 5.0% (placebo), and fatigue 17.5% vs 35.0%. No statistically significant quality of life differences were found.Conclusions: Our study showed no advantage in nPFS or OS for concurrent erlotinib and WBRT followed by maintenance erlotinib in patients with predominantly EGFR wild-type NSCLC and multiple brain metastases compared to placebo. Future studies should focus on the role of erlotinib with or without WBRT in patients with EGFR mutations.Up to 40% of patients with non-small cell lung cancer (NSCLC) develop brain metastases (BM), which are associated with poor outcome (median survival &lt;5 months) (1–3). Treatment options include whole-brain radiotherapy (WBRT) with or without corticosteroids. Modifying the radiation dose or fractionation or combining radiotherapy with radiosensitizers have not substantially improved prognosis (4–10). More than half of patients treated with WBRT ultimately die of progressive systemic disease (11–13).Erlotinib, an epidermal growth factor receptor (EGFR) pathway inhibitor, is currently approved as first-line treatment for advanced NSCLC patients harboring EGFR mutations, and, as maintenance, second-line or third-line treatments following chemotherapy (14–17). Pre-clinical data show that erlotinib enhances the inhibitory effect of ionizing radiation in lung cancer, and it crosses the blood-brain barrier, so it could be used to provide sufficient radiosensitizing and therapeutic level in the brain (18–22).To exploit the potential radiosensitizing properties, the direct effect on brain metastases, and systemic activity of erlotinib, we examined the role of erlotinib given concurrently with WBRT, then as maintenance