Development of Performance Properties of Ternary Mixtures: Field Demonstrations and Project Summary

Supplementary cementitious materials (SCM) have become common parts of modern concrete practice. The blending of two or three cementitious materials to optimize durability, strength, or economics provides owners, engineers, materials suppliers, and contractors with substantial advantages over mixtures containing only portland cement. However, these advances in concrete technology and engineering have not always been adequately captured in specifications for concrete. Users need specific guidance to assist them in defining the performance requirements for a concrete application and the selection of optimal proportions of the cementitious materials needed to produce the required durable concrete. The fact that blended cements are currently available in many regions increases options for mixtures and thus can complicate the selection process. Both Portland and blended cements have already been optimized by the manufacturer to provide specific properties (such as setting time, shrinkage, and strength gain). The addition of SCMs (as binary, ternary, or even more complex mixtures) can alter these properties, and therefore has the potential to impact the overall performance and applications of concrete. This report is the final of a series of publications describing a project aimed at addressing effective use of ternary systems. The work was conducted in several stages and individual reports have been published at the end of each stage

How to Reduce Tire-Pavement Noise: Interim Better Practices for Constructing and Texturing Concrete Pavement Surfaces

This report describes better practices for constructing and texturing quieter concrete pavements; better practices that answer the question of how we can reduce tire-pavement noise; and better practices that don\u27t compromise the other things about the pavement that are of equal or greater importance, including safety, cost, and durability. In developing this document, the National Concrete Pavement Technology Center at Iowa State University draws from its decades of combined experience working for and alongside concrete paving contractors. This document also includes the collective experience of various contractors and equipment manufacturers with a reputation for quality. These guidelines further address the challenges that are faced in consistently producing a high-quality product in a low-bid environment. This document is intended to serve as interim guidelines and better practices for texturing. Work under the pooled fund study that sponsored the development of this document is ongoing. Additional data are being collected on both existing and new concrete paving projects that will validate the practices described herein. Given the importance of this issue, however, it is believed that many of these practices can be implemented immediately without adverse consequences. Refinements to these practices can then be implemented as necessary as changes to these better practices are made in the near future

A randomized trial comparing digital and live lecture formats [ISRCTN40455708

BACKGROUND: Medical education is increasingly being conducted in community-based teaching sites at diverse locations, making it difficult to provide a consistent curriculum. We conducted a randomized trial to assess whether students who viewed digital lectures would perform as well on a measure of cognitive knowledge as students who viewed live lectures. Students' perceptions of the digital lecture format and their opinion as whether a digital lecture format could serve as an adequate replacement for live lectures was also assessed. METHODS: Students were randomized to either attend a lecture series at our main campus or view digital versions of the same lectures at community-based teaching sites. Both groups completed the same examination based on the lectures, and the group viewing the digital lectures completed a feedback form on the digital format. RESULTS: There were no differences in performance as measured by means or average rank. Despite technical problems, the students who viewed the digital lectures overwhelmingly felt the digital lectures could replace live lectures. CONCLUSIONS: This study provides preliminary evidence digital lectures can be a viable alternative to live lectures as a means of delivering didactic presentations in a community-based setting

Measurement of the cosmic ray spectrum above 4×10184{\times}10^{18} eV using inclined events detected with the Pierre Auger Observatory

A measurement of the cosmic-ray spectrum for energies exceeding $4{\times}10^{18}$ eV is presented, which is based on the analysis of showers with zenith angles greater than $60^{\circ}$ detected with the Pierre Auger Observatory between 1 January 2004 and 31 December 2013. The measured spectrum confirms a flux suppression at the highest energies. Above $5.3{\times}10^{18}$ eV, the "ankle", the flux can be described by a power law $E^{-\gamma}$ with index $\gamma=2.70 \pm 0.02 \,\text{(stat)} \pm 0.1\,\text{(sys)}$ followed by a smooth suppression region. For the energy ($E_\text{s}$) at which the spectral flux has fallen to one-half of its extrapolated value in the absence of suppression, we find $E_\text{s}=(5.12\pm0.25\,\text{(stat)}^{+1.0}_{-1.2}\,\text{(sys)}){\times}10^{19}$ eV.Comment: Replaced with published version. Added journal reference and DO

Energy Estimation of Cosmic Rays with the Engineering Radio Array of the Pierre Auger Observatory

The Auger Engineering Radio Array (AERA) is part of the Pierre Auger Observatory and is used to detect the radio emission of cosmic-ray air showers. These observations are compared to the data of the surface detector stations of the Observatory, which provide well-calibrated information on the cosmic-ray energies and arrival directions. The response of the radio stations in the 30 to 80 MHz regime has been thoroughly calibrated to enable the reconstruction of the incoming electric field. For the latter, the energy deposit per area is determined from the radio pulses at each observer position and is interpolated using a two-dimensional function that takes into account signal asymmetries due to interference between the geomagnetic and charge-excess emission components. The spatial integral over the signal distribution gives a direct measurement of the energy transferred from the primary cosmic ray into radio emission in the AERA frequency range. We measure 15.8 MeV of radiation energy for a 1 EeV air shower arriving perpendicularly to the geomagnetic field. This radiation energy -- corrected for geometrical effects -- is used as a cosmic-ray energy estimator. Performing an absolute energy calibration against the surface-detector information, we observe that this radio-energy estimator scales quadratically with the cosmic-ray energy as expected for coherent emission. We find an energy resolution of the radio reconstruction of 22% for the data set and 17% for a high-quality subset containing only events with at least five radio stations with signal.Comment: Replaced with published version. Added journal reference and DO

Measurement of the Radiation Energy in the Radio Signal of Extensive Air Showers as a Universal Estimator of Cosmic-Ray Energy

We measure the energy emitted by extensive air showers in the form of radio emission in the frequency range from 30 to 80 MHz. Exploiting the accurate energy scale of the Pierre Auger Observatory, we obtain a radiation energy of 15.8 \pm 0.7 (stat) \pm 6.7 (sys) MeV for cosmic rays with an energy of 1 EeV arriving perpendicularly to a geomagnetic field of 0.24 G, scaling quadratically with the cosmic-ray energy. A comparison with predictions from state-of-the-art first-principle calculations shows agreement with our measurement. The radiation energy provides direct access to the calorimetric energy in the electromagnetic cascade of extensive air showers. Comparison with our result thus allows the direct calibration of any cosmic-ray radio detector against the well-established energy scale of the Pierre Auger Observatory.Comment: Replaced with published version. Added journal reference and DOI. Supplemental material in the ancillary file