705 research outputs found
Epsilon-Near-Zero Al-Doped ZnO for Ultrafast Switching at Telecom Wavelengths: Outpacing the Traditional Amplitude-Bandwidth Trade-Off
Transparent conducting oxides have recently gained great attention as
CMOS-compatible materials for applications in nanophotonics due to their low
optical loss, metal-like behavior, versatile/tailorable optical properties, and
established fabrication procedures. In particular, aluminum doped zinc oxide
(AZO) is very attractive because its dielectric permittivity can be engineered
over a broad range in the near infrared and infrared. However, despite all
these beneficial features, the slow (> 100 ps) electron-hole recombination time
typical of these compounds still represents a fundamental limitation impeding
ultrafast optical modulation. Here we report the first epsilon-near-zero AZO
thin films which simultaneously exhibit ultra-fast carrier dynamics (excitation
and recombination time below 1 ps) and an outstanding reflectance modulation up
to 40% for very low pump fluence levels (< 4 mJ/cm2) at the telecom wavelength
of 1.3 {\mu}m. The unique properties of the demonstrated AZO thin films are the
result of a low temperature fabrication procedure promoting oxygen vacancies
and an ultra-high carrier concentration. As a proof-of-concept, an all-optical
AZO-based plasmonic modulator achieving 3 dB modulation in 7.5 {\mu}m and
operating at THz frequencies is numerically demonstrated. Our results overcome
the traditional "modulation depth vs. speed" trade-off by at least an order of
magnitude, placing AZO among the most promising compounds for
tunable/switchable nanophotonics.Comment: 14 pages, 9 figures, 1 tabl
Enhancement of the stability of the flow focusing technique for low-viscosity liquids
Article number 115039We propose a modified flow focusing configuration to produce low-viscosity microjets at much smaller flow rates than those reached by the standard configuration. In the modified flow focusing device, a sharpened rod blocks the recirculation cell appearing in the tapering liquid meniscus for low flow rates, which considerably improves its stability. We measured the minimum flow rates attainable with the modified configuration and compared the results with the corresponding values for the standard technique. For moderate and large applied pressure drops, the minimum flow rate reached with the modified configuration was about five times smaller than its counterpart in the standard configuration. The Weber numbers of the jets produced with the modified flow focusing configuration were considerably smaller than those with the standard technique. Numerical simulations were conducted to show how the presence of the inner rod substantially changes the flow pattern in the liquid meniscus.Ministerio de Ciencia y Educación, Junta de Extremadura y Junta de Andalucía (España) DPI2010-21103, GR10047 y P08-TEP-0412
Cosmological Consequences of Slow-Moving Bubbles in First-Order Phase Transitions
In cosmological first-order phase transitions, the progress of true-vacuum
bubbles is expected to be significantly retarded by the interaction between the
bubble wall and the hot plasma. We examine the evolution and collision of
slow-moving true-vacuum bubbles. Our lattice simulations indicate that phase
oscillations, predicted and observed in systems with a local symmetry and with
a global symmetry where the bubbles move at speeds less than the speed of
light, do not occur inside collisions of slow-moving local-symmetry bubbles. We
observe almost instantaneous phase equilibration which would lead to a decrease
in the expected initial defect density, or possibly prevent defects from
forming at all. We illustrate our findings with an example of defect formation
suppressed in slow-moving bubbles. Slow-moving bubble walls also prevent the
formation of `extra defects', and in the presence of plasma conductivity may
lead to an increase in the magnitude of any primordial magnetic field formed.Comment: 10 pages, 7 figures, replaced with typos corrected and reference
added. To appear in Phys. Rev.
Crossover from thermal hopping to quantum tunneling in Mn_{12}Ac
The crossover from thermal hopping to quantum tunneling is studied. We show
that the decay rate with dissipation can accurately be determined near
the crossover temperature. Besides considering the Wentzel-Kramers-Brillouin
(WKB) exponent, we also calculate contribution of the fluctuation modes around
the saddle point and give an extended account of a previous study of crossover
region. We deal with two dangerous fluctuation modes whose contribution can't
be calculated by the steepest descent method and show that higher order
couplings between the two dangerous modes need to be taken into considerations.
At last the crossover from thermal hopping to quantum tunneling in the
molecular magnet Mn_{12}Ac is studied.Comment: 10 pages, 3 figure
Controlling hybrid nonlinearities in transparent conducting oxides via two-colour excitation
Nanophotonics and metamaterials have revolutionised the way we think about
optical space (epsilon, mu), enabling us to engineer the refractive index
almost at will, to confine light to the smallest of the volumes, and to
manipulate optical signals with extremely small footprints and energy
requirements. Significant efforts are now devoted to finding suitable materials
and strategies for the dynamic control of the optical properties. Transparent
conductive oxides exhibit large ultrafast nonlinearities under both interband
and intraband excitations. Here, we show that combining these two effects in
aluminium-doped zinc oxide via a two colour laser field discloses new material
functionalities. Owing to the independence of the two nonlinearities the
ultrafast temporal dynamics of the material permittivity can be designed by
acting on the amplitude and delay of the two fields. We demonstrate the
potential applications of this novel degree of freedom by dynamically
addressing the modulation bandwidth and optical spectral tuning of a probe
optical pulse
From Lever to Club?: conditionality in the European Union during the financial crisis
How did the European Union come to develop so many instruments of conditionality during the Eurozone debt crisis, despite the well-documented limitations of such measures in other contexts? This article argues that major EU actors–Council, Commission, and Central Bank–were influenced by their own recent and positive experiences with conditionality, especially in the EU’s enlargement in the early 2000s and the early phase of the global financial crisis. However, despite the promise of conditional instruments in these two earlier episodes, further EU reliance on conditional policies has not brought the positive outcomes the main European institutions had hoped for. As EU institutions turned to harder and harder forms of conditionality in the Euro crisis, they relearned many of the familiar negative lessons of conditionality and ultimately had to concede that the apparent success of its conditionality tools in the two earlier phases was exceptional. The article documents the evolution of conditionality over these periods, showing how EU conditionality instruments changed over time, beginning as a ‘lever’ to assist the accession of candidate states in the enlargement period, and evolving into a ‘club’ used to impose macroeconomic discipline in the late 2000s. It shows why this approach to the Euro crisis failed and was ultimately downgraded as Eurozone policy shifted in favour of monetary measures in which conditionality played only a marginal role
Quantum Nucleation in a Ferromagnetic Film Placed in a Magnetic Field at an Arbitrary Angle
We study the quantum nucleation in a thin ferromagnetic film placed in a
magnetic field at an arbitrary angle. The dependence of the quantum nucleation
and the temperature of the crossover from thermal to quantum regime on the
direction and the strength of the applied field are presented. It is found that
the maximal value of the rate and that of the crossover temperature are
obtained at a some angle with the magnetic field, not in the direction of the
applied field opposite to the initial easy axis.Comment: 15 pages, RevTex, 3 PostScript figures. To appear in Phys. Rev.
On-chip CMOS-compatible all-optical integrator
One reason for using photonic devices is their
speed—much faster than electronic circuits—but there are many challenges in integrating the
two technologies. Ferrera et al. construct a CMOS-compatible monolithic optical waveform
integrator, a key building block for photonic circuits
Higgs Physics: Theory
I review the theoretical aspects of the physics of Higgs bosons, focusing on
the elements that are relevant for the production and detection at present
hadron colliders. After briefly summarizing the basics of electroweak symmetry
breaking in the Standard Model, I discuss Higgs production at the LHC and at
the Tevatron, with some focus on the main production mechanism, the gluon-gluon
fusion process, and summarize the main Higgs decay modes and the experimental
detection channels. I then briefly survey the case of the minimal
supersymmetric extension of the Standard Model. In a last section, I review the
prospects for determining the fundamental properties of the Higgs particles
once they have been experimentally observed.Comment: 21 pages, 15 figures. Talk given at the XXV International Symposium
on Lepton Photon Interactions at High Energies (Lepton Photon 11), 22-27
August 2011, Mumbai, Indi
Investigation of cluster states in 13b using the 9li-α resonant elastic scattering
The excitation function of the resonant reaction 4He(9Li,α) was measured with the aim of investigating the compound nucleus 13B. These measurements were performed in inverse kinematics at center-of-mass scattering angles close to 180° by using a thick 4He gas target and a 9Li beam. The 13B excitation energy region explored was 14-20 MeV where 9Li-αurations of 13B are predicted by Antysimmetrised Molecular Dynamics calculations. The measured excitation function at θcm= 180°s different clear structures in a 13B excitation energy region which was experimentally unknown
- …