1,972 research outputs found

    Evaluating the more suitable ISM frequency band for iot-based smart grids: a quantitative study of 915 MHz vs. 2400 MHz

    Get PDF
    IoT has begun to be employed pervasively in industrial environments and critical infrastructures thanks to its positive impact on performance and efficiency. Among these environments, the Smart Grid (SG) excels as the perfect host for this technology, mainly due to its potential to become the motor of the rest of electrically-dependent infrastructures. To make this SG-oriented IoT cost-effective, most deployments employ unlicensed ISM bands, specifically the 2400 MHz one, due to its extended communication bandwidth in comparison with lower bands. This band has been extensively used for years by Wireless Sensor Networks (WSN) and Mobile Ad-hoc Networks (MANET), from which the IoT technologically inherits. However, this work questions and evaluates the suitability of such a "default" communication band in SG environments, compared with the 915 MHz ISM band. A comprehensive quantitative comparison of these bands has been accomplished in terms of: power consumption, average network delay, and packet reception rate. To allow such a study, a dual-band propagation model specifically designed for the SG has been derived, tested, and incorporated into the well-known TOSSIM simulator. Simulation results reveal that only in the absence of other 2400 MHz interfering devices (such as WiFi or Bluetooth) or in small networks, is the 2400 MHz band the best option. In any other case, SG-oriented IoT quantitatively perform better if operating in the 915 MHz band.This research was supported by the MINECO/FEDER project grants TEC2013-47016-C2-2-R (COINS) and TEC2016-76465-C2-1-R (AIM). The authors would like to thank Juan Salvador Perez Madrid nd Domingo Meca (part of the Iberdrola staff) for the support provided during the realization of this work. Ruben M. Sandoval also thanks the Spanish MICINN for an FPU (REF FPU14/03424) pre-doctoral fellowship

    Rewilding urban areas to maintain ecosystem services and ecological tourism: the case of Saler's Devesa, València, Spain

    Full text link
    [EN] The Saler's Devesa is a case of a failed tourist project to urbanize a historical protected forest inside the metropolitan area of València in Spain. In the 1970s, the government started actions to urbanize this area. In fact, all the public works and some buildings were built. However, in the 1980s the new democratic government decided to rewild the area and "deconstruct" the urban development works that had already been built. The case allows knowing the process of rewilding and the difficulties to do it. On the other hand, currently in developed countries, metropolitan areas simultaneously present a stabilized population and a great surface extension. In this situation, the sustainability of these urban areas has focused on managing the city already consolidated by renovation or regeneration processes and rewilding open spaces, developing green infrastructures. Because of this, we focused our attention on researching one of the few cases that exists on rewilding urban areas. The green infrastructure concept has been used in the case of La Devesa to maintain and increase ecosystem services. In addition,these actions allow promotion of ecological tourism inside the area. The research question is "What should be the idea of society's progress when touristic urban development growth is no longer possible or desirable?" The article analyses the historical process of rewilding and rethinking the idea of progress in the current situation.Miralles García, JL.; Martínez Llorens, F. (2020). Rewilding urban areas to maintain ecosystem services and ecological tourism: the case of Saler's Devesa, València, Spain. WIT Transactions on Ecology and the Environment (Online). 248:177-189. https://doi.org/10.2495/ST200151S17718924

    ¿QUÉ VALOR TIENE EL ARGUMENTO DE LAS «REPOBLACIONES ANTIGUAS»?: EL EJEMPLO DE LOS PINARES ALBARES DEL SISTEMA CENTRAL

    Get PDF
    During the last decades, many Iberian pine forests have been defined as «old reforestations». This is an epithet and also an argument constantly repeated in the field of phytosociology and in botany on the whole, which has been used by many authors to deny any possible role of pine woodlands upon the natural vegetation. This is what has happened with most of the Scotch pine (Pinus sylvestris L.) forests from the Central Mountain System. However, palynological and historical data show that pine woodlands have an age-old presence in areas where they are not considered as natural; these data also show a progressive area decrease during the history, and also, the lack of «old reforestations » aimed to artificially extend its distribution area. For all these reasons, the «old reforestations» argument used for the geobotanical interpretation of the Scotch pine forests from the Central Mountain System must be rejected. In like manner, the indiscriminate use of the term «reforestation» as a synonym of «introduced or aloctonous», which has been used for many pine woodlands, has led to some misunderstandings and serious interpretation mistakes which must be corrected studying the vegetation existing before the reforestation was made. That way it would be possible knowing what formations are in their natural range and what are not, regardless the anthropic use they have been subjected to.En las últimas décadas, muchos pinares ibéricos han sido definidos como «repoblaciones antiguas», calificativo y a la vez argumento muy repetido en el campo de la fitosociología y la botánica en general, con el que numerosos autores han negado que tengan cualquier papel en la vegetación natural. Esto es lo que ha ocurrido con gran parte de las masas de pino albar (Pinus sylvestris L.) del Sistema Central. Sin embargo, los datos palinológicos e históricos revelan que la presencia de los pinares, en lugares donde se afirma que no son naturales, es muy antigua; también muestran una disminución progresiva de su extensión a lo largo de la historia y además, la ausencia de «repoblaciones antiguas» encaminadas a extender artificialmente su área de distribución. Por todas estas razones debemos descartar el argumento de las «repoblaciones antiguas» aplicado a la interpretación geobotánica de los pinares albares del Sistema Central. Asimismo el uso indiscriminado del calificativo «de repoblación» como sinónimo de «introducido o alóctono» aplicado a muchos pinares, ha producido equívocos y graves errores de interpretación que es necesario corregir estudiando la vegetación que había antes de realizar la reforestación y así saber qué formaciones están en sus áreas naturales y cuales no, independientemente del manejo antrópico al que hayan sido sometidas

    Implementación de sistema operativo Linux en instituciones educativas públicas municipio de Pereira

    Get PDF
    La tecnología ha avanzado con rapidez a través del tiempo permitiéndonos hacer uso de herramientas eficaces que nos llevan a optimizar funciones y dinamizar tareas en diferentes campos y entornos posibles, por afirmarlo de algún modo la tecnología ha conseguido ligar al ser humano a ella. La creación de toda clase de proyectos enfocados a las TIC que impacten en una comunidad educativa y en especial a las instituciones del estado, sirven para facilitarnos los procesos de aprendizaje y mejora continua, en investigación y aprovechamiento de los recursos tecnológicos para el desarrollo empresarial, educativo y cultural. Dentro de los recursos más importantes que se utilizan en las aulas educativas, están el acceso a la información por medio de las computadoras, las cuales hacen uso de sistema operativo el cual en la mayoría de casos supone grandes costos en licenciamiento, instalación y mantenimiento sin tener en cuenta que hay herramientas de acceso libre que incluso superan en recursos de acceso didáctico y pedagógico a las existentes

    Apuntes sobre los intercambios culturales y comerciales, con relación especial a los minerales, entre España y Egipto, desde la Antigüedad hasta la Edad Media

    Get PDF
    Según el Profesor JESÚS LUIS CUNCHILLOS ILARRI, en una conferencia sobre los Orígenes de la palabra "Hispania" impartida en la Asociación de Amigos del Centro de Estudios del Próximo Oriente (8 de mayo de 1996), una de sus más probables etimologías sería "isla, costa donde se chapean o batean metales", o también "costa de los metales". Asimismo, la principal región minera española en la antigüedad, Tarsis (Tartesos, en versión griega), en hebreo significaría fundición o mina1. Según JORGE DÍAZ SÁNCHEZ, existen textos donde se señala que los egipcios traían maestros extranjeros para la prospección minera. Estos eran llamados épuru o éburu (¿íberos?). Para dicho autor, la palabra Baetis (Betis, río que determina la región Bética) habría influido en el idioma de este pueblo: "Numerosas palabras egipcias testimonian los orígenes ibéricos de la geología y minería egipcia. Valga como ejemplo que existe toda una variedad de palabras con la raíz baet usadas para denominar a las minas y canteras, tipos de piedras, al mineral en general, al cobre, al lingote, al crisol, a la acción de excavar en las minas [...]. Según el jeroglífico determinativo que acompaña a la palabra Baeti, éste era el país peninsular de las minas, de las canteras y de los lingotes"2. De todas formas, habría que profundizar más en dichas tesis. Pero sin duda, ESPAÑA es el país de los metales y así aparece en los textos antiguos. Por ejemplo, SAN ISIDORO DE SEVILLA (s. VII) en Las Etimologías (XIV, 4, 28), al describir Hispania señala que es "riquísima por la abundancia de piedras preciosas y de metales"3; citas parecidas hace ALFONSO X. Sin embargo, Egipto también es un país minero, lo que se puede comprobar con la lectura de las obras de los clásicos, tal es el caso de los libros de PLINIO. Por tanto, los intercambios comerciales van a ser en los dos sentidos. El Mediterráneo es un espacio físico de tráfico mercantil y migratorio entre los pueblos que lo circundan, ya desde la prehistoria

    Hornos morunos de yeso de la Comunidad de Madrid

    Get PDF
    En Madrid abundan los yacimientos de yeso, por eso esta sustancia se ha explotado desde antiguo, empleándose, al menos desde la Edad Media, hornos de cuba circulares, elaborados generalmente con mampostería. Estos hornos que en otras regiones se llaman hornos morunos, han venido funcionando hasta tiempos recientes. En la provincia han existido más de cien hornos trabajando a la vez, sin embargo la presión urbana de los municipios de la Comunidad de Madrid está acabando con muchos de ellos, al estar frecuentemente ubicados en las proximidades de los cascos urbanos históricos. En un proyecto de la Comunidad de Madrid, relativo al inventario del Patrimonio Minero-Metalúrgico, hemos podido identificar alguno de estos conjuntos patrimoniales. También hemos procurado recoger, mediante tradiciones orales y por la literatura minera, datos de los procesos industriale

    γ\gamma rays run on time

    Full text link
    Significant absorption of radiation is usually accompanied by refraction. This is not the case for γ\gamma rays travelling cosmic distances. We show that the real and imaginary parts of the refraction index are indeed commensurable, as they are related by dispersion relations, but when turning to physical observables, the (finite) optical depth is way larger than the (infinitesimal) time delay of the gamma rays relative to gravitational radiation. The numerically large factor solving the apparent contradiction is Eγ/H0E_\gamma/H_0 arising from basic wave properties (Bouguer-Beer-Lambert law) and the standard cosmological model, respectively.Comment: 11 pages containing 9 plot

    Smart Office en Sucre, una solución empresarial para aumentar la productividad /

    Get PDF
    El concepto de Smart Office o también conocido Oficina Inteligente como modelo negocio, es un espacio amable con personas y con el entorno, el cual permite desarrollar la actividad laboral en condiciones óptimas de confort y mejorar la productividad de los empleados gracias a una integración adecuada de las tecnologías haciendo un uso eficiente de los recursos. Es un modelo de negocio alternativo e innovador aplicado en la Empresa, que pretende satisfacer necesidades a un universo de clientes. Dentro de la expectativa empresarial, busca aumentar la riqueza de sus creadores o accionistas, desde dos ópticas: la primera la encontramos al ser más autosuficientes y sostenibles, basándonos en la eficiencia, el ahorro y el medio ambiente, conquistando variables claves como productividad y competitividad con un menor costo de producción y mejores resultados a nivel de ventas; la segunda, va más relacionada con la propuesta de valor, pues se da en la medida en que puedo descargar o transferir toda la carga operativa y administrativa, de aquellas actividades que me restan tiempo de productividad, a un tercero para en si poder dedicarme a mi core de negocio. Este formato día a día adquiere más adeptos y se posiciona globalmente como una alternativa de inversión innovadora que apoya los procesos de incubación y crecimiento de las empresas dentro de un contexto globalizado pero demasiado exigente. Hoy podemos concluir que es un formato para crecer como organización con bajos costos de producción.Incluye referencias bibliográficas (páginas 109-113

    Simultaneous high-speed spectroscopy and 2-color pyrometry analysis in an optical compression ignition engine fueled with OME X -diesel blends

    Full text link
    [EN] E-fuels are a very attractive way for improving the well-to-wheel emissions of CO 2 in internal combustion engines. In the particular case of compression ignition engines, the Oxymethylene dimethyl ether (OME X ), an e-fuel with nearly soot-free combustion under mixing-controlled conditions, is a good candidate for the replacement of fossil fuels. However, the Lower Heating Value of OME X is nearly half of the diesel fuel, which means that much longer injection durations are required in the real engine. In addition, the very low viscosity and lubricity of OME X can damage the injection system if used pure, but it can be an interesting fuel when blended with conventional diesel. Thus, the main objective of this paper is to evaluate the potential of OME X -diesel blends to bypass these OME X limitations whilst keeping low soot formation trends. For this purpose, a single cylinder optical diesel engine at part load was employed. The soot production for the different fuel blends was analyzed by applying three different high-speed imaging techniques: natural luminosity, flame spectroscopy and 2-color pyrometry. Natural luminosity analysis showed that the flame light intensity scales with diesel fraction up to 30% of diesel in the blend. The spectroscopy analysis has revealed that soot formation of OME X fuel is almost null. When blended with diesel at 50%, although soot formation is still lower than for pure diesel, higher soot levels are obtained in the last stages of the cycle as a consequence of the longer injections required.This work was partially funded by Generalitat Valenciana through the Programa Santiago Grisola (GRISOLIAP/2018/142) program.Pastor, JV.; García Martínez, A.; Micó, C.; De Vargas Lewiski, F. (2021). Simultaneous high-speed spectroscopy and 2-color pyrometry analysis in an optical compression ignition engine fueled with OME X -diesel blends. Combustion and Flame. 230:1-13. https://doi.org/10.1016/j.combustflame.2021.111437S11323
    corecore