Stacking of oligo and polythiophenes cations in solution: surface tension and dielectric saturation

The stacking of positively charged (or doped) terthiophene oligomers and quaterthiophene polymers in solution is investigated applying a recently developed unified electrostatic and cavitation model for first-principles calculations in a continuum solvent. The thermodynamic and structural patterns of the dimerization are explored in different solvents, and the distinctive roles of polarity and surface tension are characterized and analyzed. Interestingly, we discover a saturation in the stabilization effect of the dielectric screening that takes place at rather small values of $\epsilon_0$. Moreover, we address the interactions in trimers of terthiophene cations, with the aim of generalizing the results obtained for the dimers to the case of higher-order stacks and nanoaggregates

A fast, dense Chebyshev solver for electronic structure on GPUs

Matrix diagonalization is almost always involved in computing the density matrix needed in quantum chemistry calculations. In the case of modest matrix sizes ($\lesssim$ 5000), performance of traditional dense diagonalization algorithms on modern GPUs is underwhelming compared to the peak performance of these devices. This motivates the exploration of alternative algorithms better suited to these types of architectures. We newly derive, and present in detail, an existing Chebyshev expansion algorithm [W. Liang et al, J. Chem. Phys. 2003] whose number of required matrix multiplications scales with the square root of the number of terms in the expansion. Focusing on dense matrices of modest size, our implementation on GPUs results in large speed ups when compared to diagonalization. Additionally, we improve upon this existing method by capitalizing on the inherent task parallelism and concurrency in the algorithm. This improvement is implemented on GPUs by using CUDA and HIP streams via the MAGMA library and leads to a significant speed up over the serial-only approach for smaller ($\lesssim$ 1000) matrix sizes. Lastly, we apply our technique to a model system with a high density of states around the Fermi level which typically presents significant challenges.Comment: Submitted to Journal of Chemical Physics Communication

Estimating wild boar ( Sus scrofa ) abundance and density using capture-resights in Canton of Geneva, Switzerland

We estimated wild boar abundance and density using capture-resight methods in the western part of the Canton of Geneva (Switzerland) in the early summer from 2004 to 2006. Ear-tag numbers and transmitter frequencies enabled us to identify individuals during each of the counting sessions. We used resights generated by self-triggered camera traps as recaptures. Program Noremark provided Minta-Mangel and Bowden's estimators to assess the size of the marked population. The minimum numbers of wild boars belonging to the unmarked population (juveniles and/or piglets) were added to the respective estimates to assess total population size. Over the 3years, both estimators showed a stable population with a slight diminishing tendency. We used mean home range size determined by telemetry to assess the sampled areas and densities. Mean wild boar population densities calculated were 10.6individuals/km2 ± 0.8 standard deviation (SD) and 10.0ind/km2 ± 0.6 SD with both estimators, respectively, and are among the highest reported from Western Europe. Because of the low proportion of marked animals and, to a lesser extent, of technical failures, our estimates showed poor precision, although they displayed similar population trends compared to the culling bag statistics. Reported densities were consistent with the ecological conditions of the study are

Adaptive Localization Regions for O(N) Density Functional Theory

A linear scaling approach for general and accurate pseudopotential Density Functional Theory calculations is presented. It is based on a Finite Difference discretization. Effective O(N) scaling is achieved by confining the orbitals in spherical localization regions. To improve accuracy and flexibility while computing the smallest possible number of orbitals, we propose an algorithm to adapt localization regions during computation. Numerical results for a polyacethylene chain and a magnesium oxide ring are presented

MIKA: a multigrid-based program package for electronic structure calculations

A general real-space multigrid algorithm MIKA (Multigrid Instead of the K-spAce) for the self-consistent solution of the Kohn-Sham equations appearing in the state-of-the-art electronic-structure calculations is described. The most important part of the method is the multigrid solver for the Schr\"odinger equation. Our choice is the Rayleigh quotient multigrid method (RQMG), which applies directly to the minimization of the Rayleigh quotient on the finest level. Very coarse correction grids can be used, because there is in principle no need to represent the states on the coarse levels. The RQMG method is generalized for the simultaneous solution of all the states of the system using a penalty functional to keep the states orthogonal. Special care has been taken to optimize the iterations towards the self-consistency and to run the code in parallel computer architectures. The scheme has been implemented in multiple geometries. We show examples from electronic structure calculations employing nonlocal pseudopotentials and/or the jellium model. The RQMG solver is also applied for the calculation of positron states in solids.Comment: To appear in a special issue of Int J. Quant. Chem. devoted to the conference proceedings of 9th International Conference on the Applications of the Density Functional Theory in Chemistry and Physic

O(N) complexity algorithms for First-Principles Electronic Structure Calculations

The fundamental equation governing a non-relativistic quantum system of N particles is the time-dependant Schroedinger Equation [Schroedinger, 1926]. In 1965, Kohn and Sham proposed to replace this original many-body problem by an auxiliary independent-particles problem that can be solved more easily (Density Functional Theory). Solving this simplified problem requires to find the subspace of dimension N spanned by the N eigenfunctions {Psi}{sub i} corresponding to the N lowest eigenvalues {var_epsilon}{sub i} of a non-linear Hamiltonian operator {cflx H} determined from first-principles. From the solution of the Kohn-Sham equations, forces acting on atoms can be derived to optimize geometries and simulate finite temperature phenomenon by molecular dynamics. This technique is used at LLNL to determine the Equation of State of various materials, and to study biomolecules and nanomaterials

A unified electrostatic and cavitation model for first-principles molecular dynamics in solution

The electrostatic continuum solvent model developed by Fattebert and Gygi is combined with a first-principles formulation of the cavitation energy based on a natural quantum-mechanical definition for the surface of a solute. Despite its simplicity, the cavitation contribution calculated by this approach is found to be in remarkable agreement with that obtained by more complex algorithms relying on a large set of parameters. Our model allows for very efficient Car-Parrinello simulations of finite or extended systems in solution, and demonstrates a level of accuracy as good as that of established quantum-chemistry continuum solvent methods. We apply this approach to the study of tetracyanoethylene dimers in dichloromethane, providing valuable structural and dynamical insights on the dimerization phenomenon

Linear scaling first-principles molecular dynamics with plane waves accuracy

We propose a real-space finite differences approach for accurate and unbiased O(N) Density Functional Theory molecular dynamics simulations based on a localized orbitals representation of the electronic structure. The discretization error can be reduced systematically by adapting the mesh spacing, while the orbitals truncation error decreases exponentially with the radius of the localization regions. For regions large enough, energy conservation in microcanonical simulations is demonstrated for liquid water. We propose an explanation for the energy drift observed for smaller regions

Workshop report. Linear-Scaling Ab Initio Calculations: Applications and Future Directions

The study of properties and of processes in materials, frequently hinges upon understanding phenomena which originate at the atomic level. In such cases the accurate description of the interactions between large numbers of atoms is critical and in turn requires the accurate description of the electrons which play a crucial role in the bonding of atoms into molecules, surfaces and solids. This can only be achieved by solving the equations of quantum mechanics. These equations are too complicated to solve exactly; however their solutions can be approximated by computational techniques. The most accurate ? but also most computationally demanding ? are the “ab initio” techniques which do not use any empirical adjustable parameters. Amongst them, the Density Functional Theory (DFT) formulation of quantum mechanics stands out as an excellent compromise between accuracy and computational efficiency. However, the applicability of ab initio techniques is severely limited by poor scaling: the computational effort needed to perform an ab initio calculation increases with (at least) the third power of the number of atoms, N. This cubic-scaling bottleneck limits the number of atoms we can study to a few hundred at most, even on parallel supercomputers. To overcome this length-scale limitation, a number of researchers worldwide have been pioneering the development of a novel class of ab initio methods with linear-scaling or “Order N” (O(N)) computational cost which nevertheless retain the same high level of accuracy as the conventional approaches. While physically motivated, such methods have proved particularly hard to develop as they introduce highly non-trivial localisation constraints. Nevertheless, many major obstacles have been overcome and a number of O(N) methods (SIESTA, CONQUEST, ONETEP, etc.) for ground state DFT calculations on systems with a gap (e.g. molecules, semiconductors and insulators) are now available and have reached a state of maturity that allows them to be used to study ”real” materials. The particular focus of this workshop is therefore to look forward to what can be achieved in the next few years. Our aim is twofold: (1) As O(N) methods are currently extending the applicability of DFT calculations to problems involving biomolecules and nanostructures they are leading to completely new levels of understanding of these systems. This CECAM meeting will give us the opportunity to make an appraisal of such large-scale simulations and their potential to connect more directly to experiments. (2) We also want to examine the options for extending linear-scaling to problems that cannot be treated by ground-state DFT but require other, more complex approaches. These include methods for treating metallic systems, excited states and wavefunction-based theories for including electronic correlation. Finding ways to transform these methods to linear-scaling cost, and hence extent their applicability to the nano-scale, is the next big challenge that the community of developers of large-scale electronic structure methods is beginning to face. We hope that this workshop will stimulate these major new O(N) methodological developments by bringing together the leading groups in the development of O(N) DFT methods with the leading groups in the development of metal and excited-state or wavefunction-based methods. Strong emphasis during the workshop will be given to discussion in order to promote the exchange of ideas between different communities (Physics, Chemistry, Materials Science, Biochemistry) which are all interested in large-scale applications with ab initio accuracy but are approaching them from different perspectives