8,892 research outputs found
Computational analysis of the SSME fuel preburner flow
A computational fluid dynamics model which simulates the steady state operation of the SSME fuel preburner is developed. Specifically, the model will be used to quantify the flow factors which cause local hot spots in the fuel preburner in order to recommend experiments whereby the control of undesirable flow features can be demonstrated. The results of a two year effort to model the preburner are presented. In this effort, investigating the fuel preburner flowfield, the appropriate transport equations were numerically solved for both an axisymmetric and a three-dimensional configuration. Continuum's VAST (Variational Solution of the Transport equations) code, in conjunction with the CM-1000 Engineering Analysis Workstation and the NASA/Ames CYBER 205, was used to perform the required calculations. It is concluded that the preburner operational anomalies are not due to steady state phenomena and must, therefore, be related to transient operational procedures
Full Wave Form Inversion for Seismic Data
In seismic wave inversion, seismic waves are sent into the ground and then observed at many receiving points with the aim of producing high-resolution images of the geological underground details. The challenge presented by Saudi Aramco is to solve the inverse problem for multiple point sources on the full elastic wave equation, taking into account all frequencies for the best resolution.
The state-of-the-art methods use optimisation to find the seismic properties of the rocks, such that when used as the coefficients of the equations of a model, the measurements are reproduced as closely as possible. This process requires regularisation if one is to avoid instability. The approach can produce a realistic image but does not account for uncertainty arising, in general, from the existence of many different patterns of properties that also reproduce the measurements.
In the Study Group a formulation of the problem was developed, based upon the principles of Bayesian statistics. First the state-of-the-art optimisation method was shown to be a special case of the Bayesian formulation. This result immediately provides insight into the most appropriate regularisation methods. Then a practical implementation of a sequential sampling algorithm, using forms of the Ensemble Kalman Filter, was devised and explored
Analysis of on-orbit thermal characteristics of the 15-meter hoop/column antenna
In recent years, interest in large deployable space antennae has led to the development of the 15 meter hoop/column antenna. The thermal environment the antenna is expected to experience during orbit is examined and the temperature distributions leading to reflector surface distortion errors are determined. Two flight orientations corresponding to: (1) normal operation, and (2) use in a Shuttle-attached flight experiment are examined. A reduced element model was used to determine element temperatures at 16 orbit points for both flight orientations. The temperature ranged from a minimum of 188 K to a maximum of 326 K. Based on the element temperatures, orbit position leading to possible worst case surface distortions were determined, and the subsequent temperatures were used in a static finite element analysis to quantify surface control cord deflections. The predicted changes in the control cord lengths were in the submillimeter ranges
On-orbit structural dynamic performance of a 15-meter microwave radiometer antenna
The on-orbit structural dynamic performance of a microwave radiometer antenna for Earth science applications is addressed. The radiometer is one of the Earth-observing instruments aboard a proposed geostationary platform as part of the Mission to the Planet Earth. A sequential approach is presented for assessing the ability of an antenna structure to retain its geometric shape subject to a representative onboard disturbance. This approach includes establishing the structural requirements of the antenna, developing the structural and disturbance models, performing modal and forced response analyses, and evaluating the resulting distortions in terms of the antenna's ability to meet stringent structural performance requirements. Two antenna configurations are discussed: free-flying and platform-mounted. These configurations are analyzed for a representative disturbance function which simulates rotation of the subreflector in order to perform a raster-type scan of the Earth disk. Results show that the scanning maneuver modeled would not induce antenna structural errors outside the specified limits
The Socioeconomic Impact of the Mountain Parkway and KY 15
A study of socioeconomic variables in a nine-county region in Eastern Kentucky was undertaken to determine whether significant growth had occurred since the opening of the Mountain Parkway and reconstruction of KY 15. It was hypothesized that these roads have acted as catalysts with available resources to promote a better quality of life.
Study revealed that, while income levels and business sales have enjoyed substantial increases, overall quality of life is still poor. Educational facilities are inadequate; economic diversification in business types is limited; coal is still the main stimulant for income and employment. However, outmigration of persons from the area has been reversed simply because economic conditions are better due to the reemergence of coal.
Since the return of coal as a more important energy resource for the nation has only occurred recently, the full impact of the energy crisis and better highways has yet to be seen in regard to socio-economic stimulation of this traditionally depressed region
Studies in the community ecology of invertebrates in the springs, springbrooks and becks of the Eggleshope valley
Not availabl
Thermal-distortion analysis of a spacecraft box truss in geostationary orbit
The Mission to Planet Earth enlists the use of a geostationary platform to support Earth science monitoring instruments. The strongback for a proposed geostationary platform is a deployable box truss that supports two large diameter passive microwave radiometer (PMR) and several other science instruments. A study was performed to estimate the north-south and east-west pointing errors at the mounting locations of the two PMRs due to on-orbit thermal distortions of the main truss. The baseline configuration indicated that the east-west pointing error greatly exceeded the required limits. Primary origins of the pointing errors were identified, and methods for their reduction were discussed. Thermal performance enhancements to the truss structure were modeled and analyzed, including state-of-the-art surface coatings and insulation techniques. Comparisons of the thermal enhancements to the baseline were performed. Results demonstrated that using a thermal enclosure insulating technique reduced external heat fluxes, and distributed those heat fluxes more evenly throughout the structure, sufficiently reducing the pointing error to satisfy pointing accuracy requirements for the PMR's
Conceptual design of a lunar base thermal control system
Space station and alternate thermal control technologies were evaluated for lunar base applications. The space station technologies consisted of single-phase, pumped water loops for sensible and latent heat removal from the cabin internal environment and two-phase ammonia loops for the transportation and rejection of these heat loads to the external environment. Alternate technologies were identified for those areas where space station technologies proved to be incompatible with the lunar environment. Areas were also identified where lunar resources could enhance the thermal control system. The internal acquisition subsystem essentially remained the same, while modifications were needed for the transport and rejection subsystems because of the extreme temperature variations on the lunar surface. The alternate technologies examined to accommodate the high daytime temperatures incorporated lunar surface insulating blankets, heat pump system, shading, and lunar soil. Other heat management techniques, such as louvers, were examined to prevent the radiators from freezing. The impact of the geographic location of the lunar base and the orientation of the radiators was also examined. A baseline design was generated that included weight, power, and volume estimates
Optical Identification of Close White Dwarf Binaries in the LISA Era
The Laser Interferometer Space Antenna (LISA) is expected to detect close
white dwarf binaries (CWDBs) through their gravitational radiation. Around 3000
binaries will be spectrally resolved at frequencies > 3 mHz, and their
positions on the sky will be determined to an accuracy ranging from a few tens
of arcminutes to a degree or more. Due to the small binary separation, the
optical light curves of >~ 30% of these CWDBs are expected to show eclipses,
giving a unique signature for identification in follow-up studies of the LISA
error boxes. While the precise optical location improves binary parameter
determination with LISA data, the optical light curve captures additional
physics of the binary, including the individual sizes of the stars in terms of
the orbital separation. To optically identify a substantial fraction of CWDBs
and thus localize them very accurately, a rapid monitoring campaign is
required, capable of imaging a square degree or more in a reasonable time, at
intervals of 10--100 seconds, to magnitudes between 20 and 25. While the
detectable fraction can be up to many tens of percent of the total resolved
LISA CWDBs, the exact fraction is uncertain due to unknowns related to the
white dwarf spatial distribution, and potentially interesting physics, such as
induced tidal heating of the WDs due to their small orbital separation.Comment: 4 pages, 2 figure
The Power (Law) of Indian Markets: Analysing NSE and BSE trading statistics
The nature of fluctuations in the Indian financial market is analyzed in this
paper. We have looked at the price returns of individual stocks, with
tick-by-tick data from the National Stock Exchange (NSE) and daily closing
price data from both NSE and the Bombay Stock Exchange (BSE), the two largest
exchanges in India. We find that the price returns in Indian markets follow a
fat-tailed cumulative distribution, consistent with a power law having exponent
, similar to that observed in developed markets. However, the
distributions of trading volume and the number of trades have a different
nature than that seen in the New York Stock Exchange (NYSE). Further, the price
movement of different stocks are highly correlated in Indian markets.Comment: 10 pages, 7 figures, to appear in Proceedings of International
Workshop on "Econophysics of Stock Markets and Minority Games"
(Econophys-Kolkata II), Feb 14-17, 200
- …