On the 3D printing of recycled ABS, PLA and HIPS thermoplastics for structural applications

Purpose Three-dimensional printing (3DP) is an established process to print structural parts of metals, ceramic and polymers. Further, multi-material 3DP has the potentials to be a milestone in rapid manufacturing (RM), customized design and structural applications. Being compatible as functionally graded materials in a single structural form, multi-material-based 3D printed parts can be applied in structural applications to get the benefit of modified properties. Design/methodology/approach The fused deposition modelling (FDM) is one of the established low cost 3DP techniques which can be used for printing functional/ non-functional prototypes in civil engineering applications. Findings The present study is focused on multi-material printing of primary recycled acrylonitrile butadiene styrene (ABS), polylactic acid (PLA) and high impact polystyrene (HIPS) in composite form. Thermal (glass transition temperature and heat capacity) and mechanical properties (break load, break strength, break elongation, percentage elongation at break and Young's modulus) have been analysed to observe the behaviour of multi-material composites prepared by 3DP. This study also highlights the process parameters optimization of FDM supported with photomicrographs. Originality/value The present study is focused on multi-material printing of primary recycled ABS, PLA and HIPS in composite form

Physical-mechanical characterization of biodegradable Mg-3Si-HA composites

Purpose Porous implant surface is shown to facilitate bone in-growth and cell attachment, improving overall osteointegration, while providing adequate mechanical integrity. Recently, biodegradable material possessing such superior properties has been the focus with an aim of revolutionizing implant's design, material and performance. This paper aims to present a comprehensive investigation into the design and development of low elastic modulus porous biodegradable Mg-3Si-5HA composite by mechanical alloying and spark plasma sintering (MA-SPS) technique. Design/methodology/approach This paper presents a comprehensive investigation into the design and development of low elastic modulus porous biodegradable Mg-3Si-5HA composite by MA-SPS technique. As the key alloying elements, HA powders with an appropriate proportion weight 5 and 10 are mixed with the base elemental magnesium (Mg) particles to form the composites of potentially variable porosity and mechanical property. The aim is to investigate the performance of the synthesized composites of Mg-3Si together with HA in terms of mechanical integrity hardness and Young's moduli corrosion resistance and in-vitro bioactivity. Findings Mechanical and surface characterization results indicate that alloying of Si leads to the formation of fine Mg2 Si eutectic dense structure, hence increasing hardness while reducing the ductility of the composite. On the other hand, the allying of HA in Mg-3Si matrix leads to the formation of structural porosity (5-13 per cent), thus resulting in low Young's moduli. It is hypothesized that biocompatible phases formed within the composite enhanced the corrosion performance and bio-mechanical integrity of the composite. The degradation rate of Mg-3Si composite was reduced from 2.05 mm/year to 1.19 mm/year by the alloying of HA elements. Moreover, the fabricated composites showed an excellent bioactivity and offered a channel/interface to MG-63 cells for attachment, proliferation and differentiation. Originality/value Overall, the findings suggest that the Mg-3Si-HA composite fabricated by MA and plasma sintering may be considered as a potential biodegradable material for orthopedic application

Effect of Different Modified Atmosphere Packaging on the Quality of Mulberry Fruit (Morus alba L. cv Kokuso 21)

The control of temperature and gas composition is essential to maintain the fresh flavor and quality of perishable fruits like mulberry. This study presented a modified atmosphere experiment (MAP) for fresh fruit showing the potential benefits of innovative gas mixing with argon. The effects of MAP were studied on the physicochemical and qualitative attributes of mulberry preserved at °C and R.H. Fresh mulberries were packaged with different gas combinations: MAP1 (4%O2+6%CO2+90%N2), MAP2 (10%O2+5%CO2+85%Ar), CTR1 (20.9%O2+0.04%CO2), and CTR2 (10%O2+5%CO2+85%N2). Changes in quality parameters were evaluated after 0, 4, 8, and 12 days of storage. Mulberries packaged with MAP had a lower weight loss than CTR samples which lost more than 80% of their initial weight. Furthermore, the results showed that the argon treatment was the best in keeping the fruit juice content, preserving its structure. Despite not showing great differences with MAP1 treatment, Ar allowed to maintain high TSS up to 8 storage days, slowed CO2 production. The sensory profile of mulberry fruit was not significantly affected by storage in modified atmospheres, and the production of potential unpleasant odors in MAP2 could not be perceived. The results of this study confirm that this innovative approach, using MAP technology, has a potential use in maintaining mulberry fruit quality for a longer time

Effects of Tray-Drying on the Physicochemical, Microbiological, Proximate, and Sensory Properties of White- and Red-Fleshed Loquat (Eriobotrya Japonica Lindl.) Fruit

Loquat fruits, highly valued by consumers for their characteristic aroma and pleasant taste, have a short post-harvest life and are susceptible to mechanical damage, loss of firmness, and initial organoleptic characteristics. The aim of this work was to develop a drying method suitable for storing loquat fruits in polyamide/polyethylene (PA/PE) bags containing two gaseous mixtures (treatments): MAPN2 (100% N2) and MAPP (21% O2 and 0.04% CO2), at room temperature for at least 2 months. The effects of these conditions on the physico-chemical, microbiological, proximate, and sensory properties of fruit stored over a 50-day time interval were studied. The results showed that convective tray dehydration treatment at 70 for 12 h had good drying efficiency for loquat slices. In addition, the MAPN2 packaging limited the browning of the slices, keeping the microbial groups below the detection limits, with a clear positive effect on some minerals and vitamins, which were higher in concentration compared to the MAPP-packed samples. From an applicative point of view, the tray drying method for loquat fruits is useful on a small scale but could also be easily industrialized

Tray-drying is a new way to valorise white-fleshed peach fruit

Pescabivona is a highly appreciated fruit by consumers for its sweet flavour and juicy flesh; however, it has a short shelf life and is susceptible to postharvest damage, such as mechanical injury, loss of texture and alteration of organoleptic properties. Therefore, it's necessary to develop new methods of processing and conservation for this fruit. The aim of this study was to analyse the effects of tray-drying in white peach slices and cubes at 70 ℃ for 12 hours in order to extend their shelf-life and increase its commercial availability over a long period and to obtain a new food product. The physicochemical and sensory properties of dried fruits were assessed during 30 days of storage in polyamide/polyethene (PA/PE) bags containing two gas mixtures (treatments): MAP-N2 (100% N2) and MAP-P (78% N2, 21% O2 and 0.04% CO2), at room temperature (20 ± 1 ℃). Both MAP treatments kept the fruit firmness, with MAP-P slightly more effective. Slicing produced fruit with a good appearance and firmness, while cubing produced sweet fruit with a caramel flavour and a chewier firmness. In addition, packing with MAP-N2 reduced the phenomenon of fruit browning. Overall, this study provides significant information on the drying process (time-temperature treatments) and packaging techniques (MAP) of white-fleshed peach to obtain a novel food product

On the fabrication and mechanical modelling microscale bistable tensegrity systems

Abstract We report about the analysis, design, and experimental testing of modular structures composed of bistable units derived from the classic triangular tensegrity prism. Tensegrity structures are pin-connected frameworks, composed by bars and cables, possessing internal mechanisms and self-stress states, and featuring a variety of structural responses depending on their prestress, edge connectivity, and geometry. When a tensegrity system has only one internal mechanism and one self-stress state, as in the triangular prism case, it is possible to associate to it a corresponding bistable unit, by replacing all cables with bars and changing their edge-lengths slightly. After presenting experimental results of compression tests carried out on microscale specimens fabricated through multiphoton lithography, we compare them with the numerical predictions obtained by our computational model

Comparative LCA of concrete with recycled aggregates: a circular economy mindset in Europe

[EN] Purpose Construction and demolition waste (C&DW) is the largest waste stream in the European Union (EU) and all over the world. Proper management of C&DW and recycled materials¿including the correct handling of hazardous waste¿can have major benefits in terms of sustainability and the quality of life. The Waste Framework Directive 2008/98/EC aims to have 70% of C&DW recycled by 2020. However, except for a few EU countries, only about 50% of C&DW is currently being recycled. In the present research, the environmental impact of concrete with recycled aggregates and with geopolymer mixtures is analysed. The aim of the present research is to propose a comparative LCA of concrete with recycled aggregates in the context of European politics. Methods Life cycle assessment (LCA) methodology is applied using Simapro© software. A cradle to grave analysis is carried out. The results are analysed based on the database Ecoinvent 3.3 and Impact 2002+. Results Results show that the concrete with 25% recycled aggregates is the best solution from an environmental point of view. Furthermore, geopolymer mixtures could be a valid alternative to reduce the phenomenon of ¿global warming¿; however, the production of sodium silicate and sodium hydroxide has a great environmental impact. Conclusions A possible future implementation of the present study is certainly to carry out an overall assessment and to determine the most cost-effective option among the different competing alternatives through the life cycle cost analysis.Colangelo, F.; Gómez-Navarro, T.; Farina, I.; Petrillo, A. (2020). Comparative LCA of concrete with recycled aggregates: a circular economy mindset in Europe. International Journal of Life Cycle Assessment. 25(9):1790-1804. https://doi.org/10.1007/s11367-020-01798-6S17901804259Akhtar A, Sarmah (2018) Construction and demolition waste generation and properties of recycled aggregate concrete: a global perspective. J Cleaner Prod 186:262–281Bare JC, Hofstetter P, Penningtonne DW, Helias A, de Haes U (2000) Midpoints versus endpoints: the sacrifices and benefits. Int J Life Cycle Assess 5(6):319–326Blengini GA, Garbarino E (2010) Resources and waste management in Turin (Italy): the role of recycled aggregates in the sustainable supply mix. J Clean Prod 18(10–11):1021–1030Blengini GA, Garbarino E, Šolar S, Shields DJ, Hámor T, Vinai R, Agioutantis Z (2012) Life cycle assessment guidelines for the sustainable production and recycling of aggregates: the sustainable aggregates resource management project (SARMa). J Clean Prod 27:177–181Blengini GA, Garbarino E, Bevilacqua P (2017) Sustainability and integration between mineral resources and C&DW management: overview of key issues towards a resource-efficient Europe. Env Eng Man J 16(2):493–502Borghi G, Pantini S, Rigamonti L (2018) Life cycle assessment of non-hazardous construction and demolition waste (CDW) management in Lombardy region (Italy). J Clean Prod 184:815–825Braga AM, Silvestre JD, de Brito J (2017) Compared environmental and economic impact from cradle to gate of concrete with natural and recycled coarse aggregates. J Clean Prod 162:529–543Chen C, Habert G, Bouzidi Y, Jullien A, Ventura A (2010) LCA allocation procedure used as an incitative method for waste recycling: an application to mineral additions in concrete. Res Con Rec 54(12):1231–1240Chen Z, Gu H, Bergman RD, Liang S (2020) Comparative life-cycle assessment of a high-rise mass timber building with an equivalent reinforced concrete alternative using the Athena impact estimator for buildings. Sustainability (Switzerland) 12(11):4708Colangelo F, Cioffi R (2017) Mechanical properties and durability of mortar containing fine fraction of demolition wastes produced by selective demolition in South Italy. Comp Part B: Eng 115:43–50Colangelo F, Petrillo A, Cioffi R, Borrelli C, Forcina A (2018a) Life cycle assessment of recycled concretes: a case study in southern Italy. Sci Total Env 615:1506–1517Colangelo F, Forcina A, Farina I, Petrillo A (2018b) Life cycle assessment (LCA) of different kinds of concrete containing waste for sustainable construction. Buildings 8(5):70Colangelo F, Navarro TG, Petrillo A, Farina I, Cioffi R (2020) Life-cycle impact of concrete with recycled materials. Encyclopedia of Renewable and Sustainable Materials, Volume 5(2020):414–421COM (2012) 433, COMMUNICATION FROM THE COMMISSION TO THE EUROPEAN PARLIAMENT AND THE COUNCIL Strategy for the sustainable competitiveness of the construction sector and its enterprises, http://eur-lex.europa.eu/procedure/EN/201859, Brussels, 31.7.2012, COM(2012) 433 finalCOM (2014) 445, COMMUNICATION FROM THE COMMISSION TO THE EUROPEAN PARLIAMENT AND THE COUNCIL, http://ec.europa.eu/environment/eussd/pdf/SustainableBuildingsCommunication.pdf, Brussels, 1.7.2014 COM(2014) 445 finalDavidovits J (2018) Geopolymers based on natural and synthetic metakaolin a critical review. Ceramic Eng Science Proc 38(3):201–214Di Maria A, Eyckmans J, Van Acker K (2018) Downcycling versus recycling of construction and demolition waste: combining LCA and LCC to support sustainable policy making. Waste Man 75:3–21Directive 2008/98/EC on waste (Waste Framework Directive), http://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32008L0098EN 1992-1-1:(2004) Eurocode 2: Design of concrete structures - Part 1–1: General rules and rules for buildingsEstanqueiro B, Dinis Silvestre J, de Brito J, Duarte Pinheiro M (2018) Environmental life cycle assessment of coarse natural and recycled aggregates for concrete. Eur J Env Civ Eng 22(4):429–449Etxeberria M, Vázquez E, Marí A, Barra M (2007) Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete. Cem Conc Res 37(5):735–742EU construction & demolition waste management protocol (2016) BrusselsGálvez-Martos J-L, Styles D, Schoenberger H, Zeschmar-Lahl B (2018) Construction and demolition waste best management practice in Europe. Res Con Rec 136:166–178Gluth, G.J.G., Arbi, K., Bernal, S.A., Bondar, D., Castel, A., Chithiraputhiran, S., Dehghan, A., Dombrowski-Daube, K., Dubey, A., Ducman, V., Peterson, K., Pipilikaki, P., Valcke, S.L.A., Ye, G., Hajimohammadi, A., van Deventer, J.S.J., 2017. Characterisation of one-part geopolymer binders made from fly ash. Waste Biom Val, 8(1), pp. 225–233Gomes R, Silvestre JD, de Brito J (2020) Environmental, economic and energy life cycle assessment “from cradle to cradle” (3E-C2C) of flat roofs. Journal of Building Engineering 32:101436ISO 14040 (2006) Environmental management life cycle assessment. Principles and Framework. ISO, GenevaISO 14044 (2006) Environmental management. Life cycle assessment. Requirements and Guidelines. ISO, GenevaJafary Nasab T, Monavari SM, Jozi SA, Majedi H (2020) Assessment of carbon footprint in the construction phase of high-rise constructions in Tehran. Int J Environ Sci Technol 17(6):3153–3164Jolliet O, Margni M, Charles R, Humbert S, Payet J, Rebitzer G, Rosenbaum R (2003) Impact 2002+: a new life cycle impact assessment methodology. Int J Life Cycle Assess 8(6):324–333Khan MW, Ali Y, De Felice F, Salman A, Petrillo A (2019) Impact of brick kilns industry on environment and human health in Pakistan. Sci Total Environ 678:383–389Knoeri C, Sanyé-Mengual E, Althaus H-J (2013) Comparative LCA of recycled and conventional concrete for structural applications. Int J Life Cycle Assess 18(5):909–918Lu W, Yan H (2011) A framework for understanding waste management studies in construction. Waste Man 31:1252–1260Marinković S, Radonjanin V, Malešev M, Ignjatović I (2010) Comparative environmental assessment of natural and recycled aggregate concrete. Waste Man 30(11):2255–2264Mercante IT, Bovea MD, Ibáñez-Forés V, Arena AP (2012) Life cycle assessment of construction and demolition waste management systems: a Spanish case study. Int J Life Cycle Assess 17(2):232–241Pantini S, Giurato M, Rigamonti L (2019) A LCA study to investigate resource-efficient strategies for managing post-consumer gypsum waste in Lombardy region (Italy). Res Con Rec 147:157–168Petrillo A, Cioffi R, De Felice F, Colangelo F, Borrelli C (2016) An environmental evaluation: a comparison between geopolymer and OPC concrete paving blocks manufacturing process in Italy. Env Prog Sus Energy 35(6):1699–1708Provis JL (2017) Alkali-activated cementitious materials and concretes - steps towards standardization, American Concrete Inst, ACI Special Publication 2017-January (SP 320), pp. 444-448Sayagh S, Ventura A, Hoang T, François D (2010) Sensitivity of the LCA allocation procedure for BFS recycled into pavement structures. Res cons rec 54(6):348–358Tangtinthai N, Heidrich O, Manning DAC (2019) Role of policy in managing mined resources for construction in Europe and emerging economies. J Env Man 236:613–621Tošić N, Marinković S, Dašić T, Stanić M (2015) Multicriteria optimization of natural and recycled aggregate concrete for structural use. J Clean Prod 87(1):766–776Van den Heede P, De Belie N (2012) Environmental impact and life cycle assessment (LCA) of traditional and ‘green’ concretes: literature review and theoretical calculations. Cem Conc Comp 34(4):431–442Vossberg C, Mason-Jones K, Cohen B (2014) An energetic life cycle assessment of C&D waste and container glass recycling in Cape Town, South Africa. Res Con Rec 88:39–49Walling SA, Notman S, Watts P, Govan N, Provis JL (2019) Portland cement based immobilization/destruction of chemical weapon agent degradation products. Industrial Eng Chemistry Res 58(24):10383–10393Wu H, Zuo J, Yuan H, Zillante G, Wang J (2019) A review of performance assessment methods for construction and demolition waste management. Res Cons Recycling 150:104407Zhang C, Hu M, Dong L, Gebremariam A, Mirand-Xicotencatl B, Di Maio F, Tukker A (2019) Eco-efficiency assessment of technological innovations in high-grade concrete recycling. Res Cons Recycling 149:649–66