52 research outputs found
Quantification of Ion Migration in CH3NH3PbI3 Perovskite Solar Cells by Transient Capacitance Measurements
Solar cells based on organic-inorganic metal halide perovskites show
efficiencies close to highly-optimized silicon solar cells. However, ion
migration in the perovskite films leads to device degradation and impedes large
scale commercial applications. We use transient ion-drift measurements to
quantify activation energy, diffusion coefficient, and concentration of mobile
ions in methylammonium lead triiodide (MAPbI3) perovskite solar cells, and find
that their properties change close to the tetragonal-to-orthorhombic phase
transition temperature. We identify three migrating ion species which we
attribute to the migration of iodide (I-) and methylammonium (MA+). We find
that the concentration of mobile MA+ ions is one order of magnitude higher than
the one of mobile I- ions, and that the diffusion coefficient of mobile MA+
ions is three orders of magnitude lower than the one for mobile I- ions. We
furthermore observe that the activation energy of mobile I- ions (0.29 eV) is
highly reproducible for different devices, while the activation energy of
mobile MA+ depends strongly on device fabrication. This quantification of
mobile ions in MAPbI3 will lead to a better understanding of ion migration and
its role in operation and degradation of perovskite solar cells
A Silanol-Functionalized Polyoxometalate with Excellent Electron Transfer Mediating Behavior to ZnO and TiO 2 Cathode Interlayers for Highly Efficient and Extremely Stable Polymer Solar Cells
Combining high efficiency and long lifetime under ambient conditions still poses a major challenge towards commercialization of polymer solar cells. Here we report a facile strategy that can simultaneously enhance the efficiency and temporal stability of inverted photovoltaic architectures. Inclusion of a silanol-functionalized organic–inorganic hybrid polyoxometalate derived from a PW9O34 lacunary phosphotungstate anion, namely (nBu4N)3[PW9O34(tBuSiOH)3], significantly increases the effectiveness of the electron collecting interface, which consists of a metal oxide such as titanium dioxide or zinc oxide, and leads to a high efficiency of 6.51% for single-junction structures based on poly(3-hexylthiophene):indene-C60 bisadduct (P3HT:IC60BA) blends. The above favourable outcome stems from a large decrease in the work function, an effective surface passivation and a decrease in the surface energy of metal oxides which synergistically result in the outstanding electron transfer mediating capability of the functionalized polyoxometalate. In addition, the insertion of a silanol-functionalized polyoxometalate layer significantly enhances the ambient stability of unencapsulated devices which retain nearly 90% of their original efficiencies (T90) after 1000 hours
Roadmap on organic inorganic hybrid perovskite semiconductors and devices
Metal halide perovskites are the first solution processed semiconductors that can compete in their functionality with conventional semiconductors, such as silicon. Over the past several years, perovskite semiconductors have reported breakthroughs in various optoelectronic devices, such as solar cells, photodetectors, light emitting and memory devices, and so on. Until now, perovskite semiconductors face challenges regarding their stability, reproducibility, and toxicity. In this Roadmap, we combine the expertise of chemistry, physics, and device engineering from leading experts in the perovskite research community to focus on the fundamental material properties, the fabrication methods, characterization and photophysical properties, perovskite devices, and current challenges in this field. We develop a comprehensive overview of the current state of the art and offer readers an informed perspective of where this field is heading and what challenges we have to overcome to get to successful commercializatio
Advances in hole transport materials engineering for stable and efficient perovskite solar cells
This is the first report of an investigation on flexible perovskite solar cells for artificial light harvesting by using a white light-emitting diode (LED) lamp as a light source at 200 and 400 lx, values typically found in indoor environments. Flexible cells were developed using either low-temperature sol–gel or atomic-layer-deposited compact layers over conducting polyethylene terephthalate (PET) substrates, together with ultraviolet (UV)-irradiated nanoparticle TiO2 scaffolds, a CH3NH3PbI3–xClx perovskite semiconductor, and a spiro-MeOTAD hole transport layer. By guaranteeing high-quality carrier blocking (via the 10–40 nm-thick compact layer) and injection (via the nanocrystalline scaffold and perovskite layers) behavior, maximum power conversion efficiencies (PCE) and power densities of 10.8% and 7.2 μW·cm–2, respectively, at 200 lx, and 12.1% and 16.0 μW·cm–2, respectively, at 400 lx were achieved. These values are the state-of-the-art, comparable to and even exceeding those of flexible dye-sensitized solar cells under LED lighting, and significantly greater than those for flexible amorphous silicon, which are currently the main flexible photovoltaic technologies commercially considered for indoor applications. Furthermore, there are significant margins of improvement for reaching the best levels of efficiency for rigid glass-based counterparts, which we found was a high of PCE ~24% at 400 lx. With respect to rigid devices, flexibility brings the advantages of being low cost, lightweight, very thin, and conformal, which is especially important for seamless integration in indoor environments
Role of morphology and crystallinity of nanorod and planar electron transport layers on the performance and long term durability of perovskite solar cells
High efficiency is routinely reported in CH3NH3PbI3-xClx sensitized mesoscopic solar cells (PSCs) employing planar and scaffold architectures; however, a systematic comparison of their photovoltaic performance under similar experimental conditions and their long term stability have so far not been discussed. In this paper, we compare the performance and durability of PSCs employing these two device configurations and conclude that although a planar architecture routinely provides high initial photoconversion efficiency (PCE), particularly high open-circuit voltage (VOC), a scaffold is crucial to achieve long term durable performance of such devices. In a comparative study of scaffold (rutile nanorods, NRs) vs. planar devices, the efficiency in latter dropped off by one order of magnitude in ∼300 h despite their similar initial PCE of ∼12%. We compared the performance and the durability of two types of scaffolds, i.e.; pristine and TiCl4 treated NRs, and observed that the pristine NRs showed >10% improvement in the PCE after ∼1300 h whereas the cells employing post-treated NR scaffold retained ∼60% of initial value. We address the origin of the different photovoltaic performance of planar and scaffold devices in the context of photoanode morphology and its possible effect on the cell durability
A prototype for communitising technology: Development of a smart salt water desalination device
Reduced defect density in crystalline halide perovskite films via methylamine treatment for the application in photodetectors
Considerable efforts have been devoted to optimizing and controlling the morphology and electronic properties of lead halide perovskites. The defect density of a perovskite layer strongly depends on the processing conditions. Consequently, the fabrication process of high-quality films is often complex, and reproducibility is a challenge. In this work, we present a methylamine gas-based method to recrystallize perovskite layers of any given quality in a controlled way, leading to millimeter-sized domains. Crystallinity significantly increases upon methylamine treatment, and crystal growth follows a preferred orientation. Photoluminescence- and space-charge limited current measurements show that the trap density halves after recrystallization. Conductive atomic force microscopy measurements show a higher surface conductivity and an improved spatial homogeneity after methylamine treatment. When applied in photodetectors, the improved film quality of the recrystallized films leads to increased detectivities of ≈4 × 1011 Jones compared to 3 × 109 Jones of a reference device. The response time falls from 0.1 to 10−5 s upon methylamine treatment. Our work, thus, presents a promising route to fabricating reproducible, high-quality perovskite films through well-controllable recrystallization.publishe
Perovskite-Polymer Blends Influencing Microstructures, Nonradiative Recombination Pathways, and Photovoltaic Performance of Perovskite Solar Cells
Solar cells based on organic inorganic halide perovskites are now leading the photovoltaic technologies because of their high power conversion efficiency. Recently, there have been debates on the microstructure-related defects in metal halide perovskites (grain size, grain boundaries, etc.) and a widespread view is that large grains are a prerequisite to suppress nonradiative recombination and improve photovoltaic performance, although opinions against it also exist. Herein, we employ blends of methylammonium lead iodide perovskites with an insulating polymer (polyvinylpyrrolidone) that offer the possibility to tune the grain size in order to obtain a fundamental understanding of the photoresponse at the microscopic level. We provide, for the first time, spatially resolved details of the microstructures in such blend systems via Raman mapping, light beam-induced current imaging, and conductive atomic force microscopy. Although the polymer blend systems systematically alter the morphology by creating small grains (more grain boundaries), they reduce nonradiative recombination within the film and enhance its spatial homogeneity of radiative recombination. We attribute this to a reduction in the density of bulk trap states, as evidenced by an order of magnitude higher photoluminescence intensity and a significantly higher open-circuit voltage when the polymer is incorporated into the perovskite films. The solar cells employing blend systems also show nearly hysteresis-free power conversion efficiency similar to 17.5%, as well as a remarkable shelf-life stability over 100 days
Role of the Metal-Oxide Work Function on Photocurrent Generation in Hybrid Solar Cells
ZnO is a widely used metal-oxide semiconductor for photovoltaic application. In solar cell heterostructures they not only serve as a charge selective contact, but also act as electron acceptor. Although ZnO offers a suitable interface for exciton dissociation, charge separation efficiencies have stayed rather poor and conceptual differences to organic acceptors are rarely investigated. In this work, we employ Sn doping to ZnO nanowires in order to understand the role of defect and surface states in the charge separation process. Upon doping we are able to modify the metal-oxide work function and we show its direct correlation with the charge separation efficiency. For this purpose, we use the polymer poly(3-hexylthiophene) as donor and the squaraine dye SQ2 as interlayer. Interestingly, neither mobilities nor defects are prime performance limiting factor, but rather the density of available states around the conduction band is of crucial importance for hybrid interfaces. This work highlights crucial aspects to improve the charge generation process of metal-oxide based solar cells and reveals new strategies to improve the power conversion efficiency of hybrid solar cells.publishe
- …