896 research outputs found
Circuiti asincroni: dai principi fondamentali all'implementazione
La maggioranza dei circuiti commercializzati al giorno d'oggi è di tipo sincrono. Negli ultimi anni però, questa tecnologia si è trovata a dover affrontare notevoli problemi legati al consumo di potenza e alle crescenti difficoltà di gestione del clock, in circuiti sempre più piccoli e densi.
Per ovviare a queste problematiche, che richiedono soluzioni tecnicamente complesse e dispendiose, i costruttori stanno portando l'attenzione sull'approccio asincrono che, privo di clock, promette di ridurre i consumi e velocizzare i circuiti. La mancanza di esperienza, strumenti e motivazioni adeguate rende però molto difficile una migrazione totale da un paradigma all'altro. La tecnologia che sembra destinata a prendere piede in questo contesto è quindi l'approccio ibrido Globally Asynchronous, Locally Synchronous. Importanti produttori sono impegnati nella ricerca in questo settore, che è ancora in piena fase evolutiva.
Il presente lavoro è diviso in due parti: nella prima offriremo un quadro generale sui fondamenti della tecnologia asincrona e, nella seconda, vedremo esempi di design che rappresentano l'attuale stato dell'arteope
Web Health Monitoring Survey: a new approach to enhance effectiveness of telemedicine systems
Aging of the European population and interest in a healthy population in western countries have contributed to an increase in the number of health surveys, where the role of survey design, data collection, and data analysis methodology is clear and recognized by the whole scientific community. Survey methodology has had to couple with the challenges deriving from data collection through information and communications technology (ICT). Telemedicine systems have not used patients as a source of information, often limiting them to collecting only biometric data. A more effective telemonitoring system would be able to collect objective and subjective data (biometric parameters and symptoms reported by the patients themselves), and to control the quality of subjective data collected: this goal be achieved only by using and merging competencies from both survey methodology and health research. The objective of our study was to propose new metrics to control the quality of data, along with the well-known indicators of survey methodology. Web questionnaires administered daily to a group of patients for an extended length of time are a Web health monitoring survey (WHMS) in a telemedicine system. We calculated indicators based on paradata collected during a WHMS study involving 12 patients, who signed in to the website daily for 2 months. The patients’ involvement was very high: the patients’ response rate ranged between 1.00 and 0.82, with an outlier of 0.65. Item nonresponse rate was very low, ranging between 0.0% and 7.4%. We propose adherence to the chosen time to connect to the website as a measure of involvement and cooperation by the patients: the difference from the median time ranged between 11 and 24 minutes, demonstrating very good cooperation and involvement from all patients. To measure habituation to the questionnaire, we also compared nonresponse rates to the items between the first and the second month of the study, and found no significant difference. We computed the time to complete the questionnaire both as a measure of possible burden for patient, and to detect the risk of automatic responses. Neither of these hypothesis was confirmed, and differences in time to completion seemed to depend on health conditions. Focus groups with patients confirmed their appreciation for this “new” active role in a telemonitoring system. The main and innovative aspect of our proposal is the use of a Web questionnaire to virtually recreate a checkup visit, integrating subjective (patient’s information) with objective data (biometric information). Our results, although preliminary and if need of further study, appear promising in proposing more effective telemedicine systems. Survey methodology could have an effective role in this growing field of research and applications
Reducing CO2 Emissions and Improving Water Resource Circularity by Optimizing Energy Efficiency in Buildings
Climate neutrality by 2050 is a priority objective and reducing greenhouse gas (GHG) emissions,
increasing energy efficiency, and improving the circularity processes of resources are the
imperatives of regulatory and economic instruments. Starting from the central themes of the mitigation
of the causes of climate change and the interdependence represented by the water–energy nexus,
this research focuses, through the application of the principles of the circular and green economy, on
deep energy zero-emission renovation through the improvement of circularity processes of water
resources in their integration with energetic ones on the optimization of their management within urban
districts, to measure their capacity to contribute towards reducing energy consumption and CO2
emissions during water use and distribution in buildings. After defining the key strategies and the
replicable intervention solutions for the circularity of water resources, the investigation focuses on the
definition of the research and calculation method set up to define, in parallel, the water consumption
of an urban district and the energy consumption necessary to satisfy water requirements and CO2
emissions. Starting from the application of the calculation method in an existing urban district in
Rome, 10 indicators of quantities have been developed to define water and energy consumption and
their related CO2 emissions, focusing on the obtained results to also define some interventions to
reduce water and energy consumption and CO2 emissions in territories that suffer a medium-risk
impact from contemporary climatic conditions
THE RUPTURE PROCESS OF RECENT TSUNAMIGENIC EARTHQUAKES BY GEOPHYSICAL DATA INVERSION
Subduction zones are the favorite places to generate tsunamigenic earthquakes, where
friction between oceanic and continental plates causes the occurrence of a strong
seismicity. The topics and the methodologies discussed in this thesis are focussed to the
understanding of the rupture process of the seismic sources of great earthquakes that
generate tsunamis.
The tsunamigenesis is controlled by several kinematical characteristic of the parent
earthquake, as the focal mechanism, the depth of the rupture, the slip distribution along
the fault area and by the mechanical properties of the source zone. Each of these factors
plays a fundamental role in the tsunami generation. Therefore, inferring the source
parameters of tsunamigenic earthquakes is crucial to understand the generation of the
consequent tsunami and so to mitigate the risk along the coasts.
The typical way to proceed when we want to gather information regarding the source
process is to have recourse to the inversion of geophysical data that are available.
Tsunami data, moreover, are useful to constrain the portion of the fault area that extends
offshore, generally close to the trench that, on the contrary, other kinds of data are not
able to constrain.
In this thesis I have discussed the rupture process of some recent tsunamigenic events, as
inferred by means of an inverse method.
I have presented the 2003 Tokachi-Oki (Japan) earthquake (Mw 8.1). In this study the
slip distribution on the fault has been inferred by inverting tsunami waveform, GPS, and
bottom-pressure data. The joint inversion of tsunami and geodetic data has revealed a
much better constrain for the slip distribution on the fault rather than the separate
inversions of single datasets.
Then we have studied the earthquake occurred on 2007 in southern Sumatra (Mw 8.4).
By inverting several tsunami waveforms, both in the near and in the far field, we have determined the slip distribution and the mean rupture velocity along the causative fault.
Since the largest patch of slip was concentrated on the deepest part of the fault, this is the
likely reason for the small tsunami waves that followed the earthquake, pointing out how
much the depth of the rupture plays a crucial role in controlling the tsunamigenesis.
Finally, we have presented a new rupture model for the great 2004 Sumatra earthquake
(Mw 9.2). We have performed the joint inversion of tsunami waveform, GPS and satellite
altimetry data, to infer the slip distribution, the slip direction, and the rupture velocity on
the fault. Furthermore, in this work we have presented a novel method to estimate, in a
self-consistent way, the average rigidity of the source zone. The estimation of the source
zone rigidity is important since it may play a significant role in the tsunami generation
and, particularly for slow earthquakes, a low rigidity value is sometimes necessary to
explain how a relatively low seismic moment earthquake may generate significant
tsunamis; this latter point may be relevant for explaining the mechanics of the tsunami
earthquakes, one of the open issues in present day seismology.
The investigation of these tsunamigenic earthquakes has underlined the importance to use
a joint inversion of different geophysical data to determine the rupture characteristics.
The results shown here have important implications for the implementation of new
tsunami warning systems – particularly in the near-field – the improvement of the current
ones, and furthermore for the planning of the inundation maps for tsunami-hazard
assessment along the coastal area
The Partial Elements Equivalent Circuit Method: The State Of The Art
This year marks about half a century since the birth of the technique known as the partial element equivalent circuit modeling approach. This method was initially conceived to model the behavior of interconnect-type problems for computer-integrated circuits. An important industrial requirement was the computation of general inductances in integrated circuits and packages. Since then, the advances in methods and applications made it suitable for modeling a large class of electromagnetic problems, especially in the electromagnetic compatibility (EMC)/signal and power integrity (SI/PI) areas. The purpose of this article is to present an overview of all aspects of the method, from its beginning to the present day, with special attention to the developments that have made it suitable for EMC/SI/PI problems
Historical solar Ca II K observations at the Rome and Catania observatories
Here we present the little explored Ca II K archives from the Rome and the
Catania observatories and analyse the digitised images from these archives to
derive plage areas.Comment: 5 pages, 3 figures, to be published in "Nuovo Cimento C" as
proceeding of the Third Meeting of the Italian Solar and Heliospheric
Communit
- …