Anomalous material-dependent transport of focused, laser-driven proton beams.

Intense lasers can accelerate protons in sufficient numbers and energy that the resulting beam can heat materials to exotic warm (10 s of eV temperature) states. Here we show with experimental data that a laser-driven proton beam focused onto a target heated it in a localized spot with size strongly dependent upon material and as small as 35 μm radius. Simulations indicate that cold stopping power values cannot model the intense proton beam transport in solid targets well enough to match the large differences observed. In the experiment a 74 J, 670 fs laser drove a focusing proton beam that transported through different thicknesses of solid Mylar, Al, Cu or Au, eventually heating a rear, thin, Au witness layer. The XUV emission seen from the rear of the Au indicated a clear dependence of proton beam transport upon atomic number, Z, of the transport layer: a larger and brighter emission spot was measured after proton transport through the lower Z foils even with equal mass density for supposed equivalent proton stopping range. Beam transport dynamics pertaining to the observed heated spot were investigated numerically with a particle-in-cell (PIC) code. In simulations protons moving through an Al transport layer result in higher Au temperature responsible for higher Au radiant emittance compared to a Cu transport case. The inferred finding that proton stopping varies with temperature in different materials, considerably changing the beam heating profile, can guide applications seeking to controllably heat targets with intense proton beams

The use of a physiologically based pharmacokinetic model to evaluate deconvolution measurements of systemic absorption

BACKGROUND: An unknown input function can be determined by deconvolution using the systemic bolus input function (r) determined using an experimental input of duration ranging from a few seconds to many minutes. The quantitative relation between the duration of the input and the accuracy of r is unknown. Although a large number of deconvolution procedures have been described, these routines are not available in a convenient software package. METHODS: Four deconvolution methods are implemented in a new, user-friendly software program (PKQuest, ). Three of these methods are characterized by input parameters that are adjusted by the user to provide the "best" fit. A new approach is used to determine these parameters, based on the assumption that the input can be approximated by a gamma distribution. Deconvolution methodologies are evaluated using data generated from a physiologically based pharmacokinetic model (PBPK). RESULTS AND CONCLUSIONS: The 11-compartment PBPK model is accurately described by either a 2 or 3-exponential function, depending on whether or not there is significant tissue binding. For an accurate estimate of r the first venous sample should be at or before the end of the constant infusion and a long (10 minute) constant infusion is preferable to a bolus injection. For noisy data, a gamma distribution deconvolution provides the best result if the input has the form of a gamma distribution. For other input functions, good results are obtained using deconvolution methods based on modeling the input with either a B-spline or uniform dense set of time points

Delivering medical abortion at scale: a study of the retail market for medical abortion in Madhya Pradesh, India.

BACKGROUND: Medical abortion (mifepristone and misoprostol) has the potential to contribute to reduced maternal mortality but little is known about the provision or quality of advice for medical abortion through the private retail sector. We examined the availability of medical abortion and the practices of pharmacists in India, where abortion has been legal since 1972. METHODS: We interviewed 591 pharmacists in 60 local markets in city, town and rural areas of Madhya Pradesh. One month later, we returned to 359 pharmacists with undercover patients who presented themselves unannounced as genuine customers seeking a medical abortion. RESULTS: Medical abortion was offered to undercover patients by 256 (71.3%) pharmacists and 24 different brands were identified. Two thirds (68.5%) of pharmacists stated that abortion was illegal in India. Only 106 (38.5%) pharmacists asked clients the timing of the last menstrual period and 38 (13.8%) requested to see a doctor's prescription - a legal requirement in India. Only 59 (21.5%) pharmacists correctly advised patients on the gestational limit for medical abortion, 97 (35.3%) provided correct information on how many and when to take the tablets in a combination pack, and 78 (28.4%) gave accurate advice on where to seek care in case of complications. Advice on post-abortion family planning was almost nonexistent. CONCLUSIONS: The retail market for medical abortion is extensive, but the quality of advice given to patients is poor. Although the contribution of medical abortion to women's health in India is poorly understood, there is an urgent need to improve the practices of pharmacists selling medical abortion

The development and characterisation of porphyrin isothiocyanate–monoclonal antibody conjugates for photoimmunotherapy

A promising approach to increase the specificity of photosensitisers used in photodynamic therapy has been through conjugation to monoclonal antibodies (MAb) directed against tumour-associated antigens. Many of the conjugations performed to date have relied on the activated ester method, which can lead to impure conjugate preparations and antibody crosslinking. Here, we report the development of photosensitiser–MAb conjugates utilising two porphyrin isothiocyanates. The presence of a single reactive isothiocyanate allowed facile conjugation to MAb FSP 77 and 17.1A directed against internalising antigens, and MAb 35A7 that binds to a non-internalising antigen. The photosensitiser–MAb conjugates substituted with 1–3 mol of photosensitiser were characterised in vitro. No appreciable loss of immunoreactivity was observed and binding specificity was comparable to that of the unconjugated MAb. Substitution with photosensitiser had a minimal effect on antibody biodistribution in vivo for the majority of the conjugates, although a decreased serum half-life was observed using a cationic photosensitiser at the higher loading ratios. Tumour-to-normal tissue ratios as high as 33.5 were observed using MAb 35A7 conjugates. The internalising conjugate showed a higher level of phototoxicity as compared with the non-internalising reagent, using a cell line engineered to express both target antigens. These data demonstrate the applicability of the isothiocyanate group for the development of high-quality conjugates, and the use of internalising MAb to significantly increase the photodynamic efficiency of conjugates during photoimmunotherapy

Malaria prevention in north-eastern Tanzania: patterns of expenditure and determinants of demand at the household level

OBJECTIVE: This study aims to provide a better understanding of the amounts spent on different malaria prevention products and the determinants of these expenditures. METHODS: 1,601 households were interviewed about their expenditure on malaria mosquito nets in the past five years, net re-treatments in the past six months and other expenditures prevention in the past two weeks. Simple random sampling was used to select villages and streets while convenience sampling was used to select households. Expenditure was compared across bed nets, aerosols, coils, indoor spraying, using smoke, drinking herbs and cleaning outside environment. FINDINGS: 68% of households owned at least one bed net and 27% had treated their nets in the past six months. 29% were unable to afford a net. Every fortnight, households spent an average of US $0.18 on nets and their treatment, constituting about 47$0.21). Factors positively related to expenditure were household wealth, years of education of household head, household head being married and rainy season. Poor quality roads and living in a rural area had a negative impact on expenditure. CONCLUSION: Expenditure on bed nets and on alternative malaria prevention products was comparable. Poor households living in rural areas spend significantly less on all forms of malaria prevention compared to their richer counterparts. Breaking the cycle between malaria and poverty is one of the biggest challenges facing malaria control programmes in Africa

Brain white matter structure and information processing speed in healthy older age

Cognitive decline, especially the slowing of information processing speed, is associated with normal ageing. This decline may be due to brain cortico-cortical disconnection caused by age-related white matter deterioration. We present results from a large, narrow age range cohort of generally healthy, community-dwelling subjects in their seventies who also had their cognitive ability tested in youth (age 11 years). We investigate associations between older age brain white matter structure, several measures of information processing speed and childhood cognitive ability in 581 subjects. Analysis of diffusion tensor MRI data using Tract-based Spatial Statistics (TBSS) showed that all measures of information processing speed, as well as a general speed factor composed from these tests (g(speed)), were significantly associated with fractional anisotropy (FA) across the white matter skeleton rather than in specific tracts. Cognitive ability measured at age 11 years was not associated with older age white matter FA, except for the g(speed)-independent components of several individual processing speed tests. These results indicate that quicker and more efficient information processing requires global connectivity in older age, and that associations between white matter FA and information processing speed (both individual test scores and g(speed)), unlike some other aspects of later life brain structure, are generally not accounted for by cognitive ability measured in youth

Anomalous material-dependent transport of focused, laser-driven proton beams.

Intense lasers can accelerate protons in sufficient numbers and energy that the resulting beam can heat materials to exotic warm (10 s of eV temperature) states. Here we show with experimental data that a laser-driven proton beam focused onto a target heated it in a localized spot with size strongly dependent upon material and as small as 35 μm radius. Simulations indicate that cold stopping power values cannot model the intense proton beam transport in solid targets well enough to match the large differences observed. In the experiment a 74 J, 670 fs laser drove a focusing proton beam that transported through different thicknesses of solid Mylar, Al, Cu or Au, eventually heating a rear, thin, Au witness layer. The XUV emission seen from the rear of the Au indicated a clear dependence of proton beam transport upon atomic number, Z, of the transport layer: a larger and brighter emission spot was measured after proton transport through the lower Z foils even with equal mass density for supposed equivalent proton stopping range. Beam transport dynamics pertaining to the observed heated spot were investigated numerically with a particle-in-cell (PIC) code. In simulations protons moving through an Al transport layer result in higher Au temperature responsible for higher Au radiant emittance compared to a Cu transport case. The inferred finding that proton stopping varies with temperature in different materials, considerably changing the beam heating profile, can guide applications seeking to controllably heat targets with intense proton beams

Examining characteristics, knowledge and regulatory practices of specialized drug shops in Sub-Saharan Africa: a systematic review of the literature.

BACKGROUND: Specialized drug shops such as pharmacies and drug shops are increasingly becoming important sources of treatment. However, knowledge on their regulatory performance is scarce. We set out to systematically review literature on the characteristics, knowledge and practices of specialized drug shops in Sub-Saharan Africa. METHODS: We searched PubMed, EMBASE, WEB of Science, CAB Abstracts, PsycINFO and websites for organizations that support medicine policies and usage. We also conducted open searches using Google Scholar, and searched manually through references of retrieved articles. Our search included studies of all designs that described characteristics, knowledge and practices of specialized drug shops. Information was abstracted on authors, publication year, country and location, study design, sample size, outcomes investigated, and primary findings using a uniform checklist. Finally, we conducted a structured narrative synthesis of the main findings. RESULTS: We obtained 61 studies, mostly from Eastern Africa, majority of which were conducted between 2006 and 2011. Outcome measures were heterogeneous and included knowledge, characteristics, and dispensing and regulatory practices. Shop location and client demand were found to strongly influence dispensing practices. Whereas shops located in urban and affluent areas were more likely to provide correct treatments, those in rural areas provided credit facilities more readily. However, the latter also charged higher prices for medicines. A vast majority of shops simply sold whatever medicines clients requested, with little history taking and counseling. Most shops also stocked popular medicines at the expense of policy recommended treatments. Treatment policies were poorly communicated overall, which partly explained why staff had poor knowledge on key aspects of treatment such as medicine dosage and side effects. Overall, very little is known on the link between regulatory enforcement and practices of specialized drug shops. CONCLUSIONS: Evidence suggests that characteristics and practices of specialized drug shops differ across rural and urban locations, and that these providers are highly responsive to client demand. However, there is a dearth in knowledge on how regulatory enforcement influences their characteristics and practices, and what strategies can be employed to strengthen the governance of the retail pharmaceutical sector