824 research outputs found
Storage Solutions for Renewable Production in Household Sector
Abstract The penetration of renewable sources, particularly wind and solar, into the grid has been increasing in recent years. As a consequence, there have been serious concerns over reliable and safety operation of power systems. One possible solution, to improve grid stability, is to integrate energy storage devices into power system network: storing energy produced in periods of low demand to later use, ensuring full exploitation of intermittent available sources. Focusing on stand-alone photovoltaic (PV) energy system, energy storage is needed with the purpose of ensuring continuous power flow, to minimize or, if anything, to neglect electrical grid supply. A comprehensive study on a hybrid stand-alone photovoltaic power system using two different energy storage technologies has been performed. This study examines the feasibility of replacing electricity provided by the grid with hybrid system to meet household demand. This paper is a part of an experimental and a theoretical study which is currently under development at University of Bologna. A test facility is under construction, at the University of Bologna, for the experimental characterization of the cogenerative performance of small scale hybrid power systems, composed of micro-CHP systems of different technologies : a Micro Rankine Cycles (MRC), a Proton Exchange Membrane Fuel Cells (PEM-FC), a battery, an electrolyzer and a heat recovery subsystem. The test set-up is also integrated with an external load simulator, in order to generate variable load profiles. This paper presents the theoretical results of the performance simulations developed considering an hybrid system consisting on a photovoltaic array (PV), electrochemical batteries (B) and electrolyzer (HY) with a H2 tank and a Proton Exchange Membrane Fuel Cell (PEM-FC) stack, in case of a household electrical demand. The performance of this system have been evaluated by the use of a calculation code, in-house developed by University of Bologna; future activities will be the tuning of the software with the experimental results, in order to realize a code able to define the correct size of each sub-system, ones the load profile of the utility is known or estimated
Smart District Heating: Distributed Generation Systems' Effects on the Network☆
Abstract The European strategy 20-20-20 – providing for energy efficiency increase, pollutant emissions reduction and fossil fuel consumption reduction – leads to an increasing attention on the concept of smart cities. In this scenario, it is important to consider a possible integration between networks and distributed generation systems – i.e. to realize a bidirectional energy flux at the utilities, giving rise to the so-called smart grid – not only for the electrical sector, but also for the thermal energy field. Therefore, the concept of smart grid could be extended to the heat sector in relation to District Heating Networks (DHNs) and considering thermal energy distributed generation systems, such as solar thermal panels or micro-Combined Heat and Power (micro-CHP) generators. In this study several different layouts for the utilities substations in smart DHNs will be presented and discussed. These layouts have been developed in order to allow the bidirectional exchange of thermal energy at the utilities, optimizing the thermal exchange as function of network design temperatures (for both the supply and the return), of utilities' thermal power requirement and depending on the characteristics of the production system. Further, in this paper the results obtained from the simulations, carried out with the software Intelligent Heat Energy Network Analysis (I.H.E.N.A.) considering the implementation of the elaborated layouts, will be analyzed
Overview and Status of Thermophotovoltaic Systems
Abstract In the last decade thermophotovoltaic (TPV) generator has gained an increasing attention as cogeneration system for the distributed generation sector. Nevertheless, these systems are not fully developed and studied: several aspects need to be further investigated and completely understood. The aim of this study is to give a complete overview and the status of the art of thermophotovoltaic generation considering both the research developments and the experiences field. More in details, in this study, the characteristics of a TPV generator are analyzed with a particular attention to the physical relationships which govern the behavior of its main components. Moreover, the current technologies regarding the combustor, the emitter, the optical filter and the photovoltaic cells are investigated by taking into account both the role of each component and also their integration in the whole system. Finally, a critical review of the realized prototypes is presented and discussed
Hydrogen sulfide as potential regulatory gasotransmitter in arthritic diseases
The social and economic impact of chronic inflammatory diseases, such as arthritis, explains the growing interest of the research in this field. The antioxidant and anti-inflammatory properties of the endogenous gasotransmitter hydrogen sulfide (H2S) were recently demonstrated in the context of different inflammatory diseases. In particular, H2S is able to suppress the production of pro-inflammatory mediations by lymphocytes and innate immunity cells. Considering these biological effects of H2S, a potential role in the treatment of inflammatory arthritis, such as rheumatoid arthritis (RA), can be postulated. However, despite the growing interest in H2S, more evidence is needed to understand the pathophysiology and the potential of H2S as a therapeutic agent. Within this review, we provide an overview on H2S biological effects, on its role in immune-mediated inflammatory diseases, on H2S releasing drugs, and on systems of tissue repair and regeneration that are currently under investigation for potential therapeutic applications in arthritic diseases
Utilities Substations in Smart District Heating Networks
Abstract In the last decades the concept of distributed generation – i.e. the installation of (electrical and/or thermal) energy production systems at the final users – was born and found gradually increasing diffusion. For what concerns the electrical production, the distributed generation systems are directly connected to the National Electricity Transmission Grid, allowing a bidirectional energy flux at the utilities and giving rise to the so-called smart grid. In this scenario and considering that, even thanks to the direction taken by European regulations, in the European territory there is already a large number of thermal power generation's distributed systems (e.g. solar thermal panels), in the near future the concept of smart grid could be extended to the heat sector, especially in relation to District Heating Networks (DHNs). As a consequence, with the aim of analyzing the penetration of this type of networks, several possible layouts for the exchange utilities' substation have been developed and will be presented in this study. Such layouts allow to optimize thermal exchange, as a function of network design temperatures (for both the supply and the return), of utilities' thermal power requirement and depending on the characteristics of the production system
Comparative Analysis of Renewable Energy Community Designs for District Heating Networks: Case Study of Corticella (Italy)
In recent years, a rapid increase in the adoption of renewable energy sources and in the transition from a centralized electricity generation system to an increasingly distributed one has occurred. Within this scenario, in line with the European directives for achieving the objectives in the field of energy transition and climate change, energy communities are seen as potential contributors. The purpose of this work is to analyze the application potential of the energy community concept associated with district heating networks, leading to better overall energy-economic performance. This was demonstrated for a specific energy community in Italy, and it can be achieved by maximizing internal energy sharing-resulting from the electricity surplus generated by the photovoltaic system-and adopting different strategies that include heat pumps in order to maximize self-consumption and self-sufficiency, as well as to evaluate the most efficient investment in economic terms by exploiting the incentive tariff on shared energy. The results show that the performance of the system can be improved with the proposed design, achieving a significant reduction in the system's energy demand, emissions and costs: compared to the reference case, the use of photovoltaics reduces primary energy demand by approximately 11%, while the addition of the energy community configuration allows emissions to be reduced by nearly 12%, with no additional investment
Performance Increase of a Small-scale Liquefied Natural Gas Production Process by Means of Turbo-expander☆
Abstract In the last years, the growing demand of the energy market has led to the increasing penetration of renewable energy sources in order to achieve the primary energy supply. However, in the next years fossil fuels are expected to remain the dominant energy source, due to the forecasted increase of global energy consumption. In particular, the natural gas is predicted to still play a key role in the energy market, on account of its lower environmental impact than other fossil fuels. Natural gas is currently employed mainly as gaseous fuel for stationary energy generation, but also as liquefied fuel, as an alternative to the diesel fuel, in vehicular applications. Liquefied Natural Gas (LNG) is currently produced in large plants directly located at the extraction sites. The aim of the study is the definition of an optimal small-scale production process for LNG, to be realized – in opposition to the current habit – directly at filling stations. With this purpose, two different LNG production layouts have been proposed and investigated within a thermodynamic analysis: starting from a Joule-Thompson LNG expansion process, a new layout with a turbo-expander has been proposed for the natural gas liquefaction. The carried-out simulations show that the new proposed solution allow to optimize the LNG production process and to minimize the process' energy consumption
Correction to: HUWE1 controls MCL1 stability to unleash AMBRA1-induced mitophagy
An amendment to this paper has been published and can be accessed via a link at the top of the paper
HUWE1 controls MCL1 stability to unleash AMBRA1-induced mitophagy
Receptor-mediated mitophagy is a crucial process involved in mitochondria quality control. AMBRA1 is a mitophagy receptor for the selective removal of damaged mitochondria in mammalian cells. A critical unresolved issue is how AMBRA1-mediated mitophagy is controlled in response to cellular stress. Here, we investigated the role of BCL2-family proteins on AMBRA1-dependent mitophagy and showed that MCL1 delays AMBRA1-dependent mitophagy. Indeed, MCL1 overexpression is sufficient to inhibit recruitment to mitochondria of the E3 Ubiquitin ligase HUWE1, a crucial dynamic partner of AMBRA1, upon AMBRA1-mediated mitophagy induction. In addition, we found that during mitophagy induced by AMBRA1, MCL1 levels decreased but were sustained by inhibition of the GSK-3β kinase, which delayed AMBRA1-mediated mitophagy. Also, we showed that MCL1 was phosphorylated by GSK-3β at a conserved GSK-3 phosphorylation site (S159) during AMBRA1-mediated mitophagy and that this event was accompanied by HUWE1-dependent MCL1 degradation. Altogether, our results demonstrate that MCL1 stability is regulated by the kinase GSK-3β and the E3 ubiquitin ligase HUWE1 in regulating AMBRA1-mediated mitophagy. Our work thus defines MCL1 as an upstream stress-sensitive protein, functional in AMBRA1-mediated mitophagy
energetic and economic analysis of a new concept of solar concentrator for residential application
Abstract Renewable energy penetration is increasing in last years, covering a more and more important role in both electrical and thermal supply. Nowadays, the photovoltaic conversion is a consolidated technology and can be efficiently combined with solar concentration. In this study, a new concept of photovoltaic solar concentrator based on non-conventional mirrors coupled with high efficiency triple-junctions cells is described and discussed. More in details, as for the optical design, deformations are applied to classical spherical mirrors to control solar aberrations and boost efficiency of a receiver consisting in a dense array of cells. The efficiency enhance is obtained by high matching between the collected solar irradiance and the receiver electrical features. The concentrator is able to produce both electrical and thermal energy: the system requires in fact an active cooling circuit to maintain the cells performance. This behavior makes the system suitable for combined heat and power applications with particular reference to high direct irradiance environments. An analytical study, considering a residential utility has been performed in order to understand the energetic and economic performance of the system. In particular, a simulation has been carried out by the use of an in-house-developed calculation code considering a whole year of operation
- …