Platinum–rhodium–tin/carbon electrocatalysts for ethanol oxidation in acid media: effect of the precursor addition order and the amount of tin

Carbon-supported Pt x –Rh y –Sn z catalysts (x:y:z = 3:1:4, 6:2:4, 9:3:4) are prepared by Pt, Rh, and Sn precursors reduction in different addition order. The materials are characterized by X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy techniques and are evaluated for the electrooxidation of ethanol in acidic media by cyclic voltammetry, chronoamperometry, and anode potentiostatic polarization. The influence of both the order in which the precursors are added and the composition of metals in the catalysts on the electrocatalytic activity and physico-chemical characteristics of Pt x –Rh y –Sn z /C catalysts is evaluated. Oxidized Rh species prevail on the surface of catalysts synthesized by simultaneous co-precipitation, thus demonstrating the influence of synthesis method on the oxidation state of catalysts. Furthermore, high amounts of Sn in composites synthesized by co-precipitation result in very active catalysts at low potentials (bifunctional effect), while medium Sn load is needed for sequentially deposited catalysts when the electronic effect is most important (high potentials), since more exposed Pt and Rh sites are needed on the catalyst surface to alcohol oxidation. The Pt3–Rh1–Sn4/C catalyst prepared by co-precipitation is the most active at potentials lower than 0.55 V (related to bifunctional effect), while the Pt6–Rh2–Sn4/C catalyst, prepared by sequential precipitation (first Rh and, after drying, Pt + Sn), is the most active above 0.55 V.The authors thank the Brazilian National Council of Technological and Scientific Development-CNPq (Grants: 402243/2012-9, 303630/2012-4, 474261/2013-1, 407274/2013-8, and 310282/2013-6) for the scholarships and financial support for this work

Pt-Sn/C as a possible methanol-tolerant cathode catalyst for DMFC

An effective method was developed for preparing highly dispersed nano-sized Pt–Sn/C electrocatalyst synthesised by a modified polyol reduction method. From XRD patterns, the Pt–Sn/C peaks shifted slightly to lower 2θ angles when compared with commercial Pt/C catalyst, suggesting that Sn formed alloy with Pt. Based on HR-TEM images, the Pt–Sn/C nanoparticles showed small particle sizes and well dispersed onto the carbon support with a narrow particle distribution. The methanol oxidation reaction on the as-prepared Pt–Sn/C catalyst appeared at lower currents (+7.08 mA at +480 mV vs. Ag/AgCl) compared to the commercial Pt/C (+8.25 mA at +480 mV vs. Ag/AgCl) suggesting that the Pt–Sn/C catalyst has ‘methanol tolerance capabilities’. Pt–Sn/C HA Slurry pH3 catalysts showed better activity towards the oxygen-reduction reaction (ORR) than commercial Pt/C which could be attributed to smaller particle sizes. In our study, the Pt–Sn/C catalyst appears to be a promising methanol-tolerant catalyst with activity towards the ORR in the DMFC.Web of Scienc

Electrochemical Degradation of Diuron by Anodic Oxidation on a Commercial Ru_0.3Ti_0.7O₂ Anode in a Sulfate Medium

This work presents the electrochemical degradation of the herbicide Diuron by anodic oxidation on a Ti/Ru0.3Ti0.7O2 metal mixed oxide anode using sulfate as the electrolyte. The study includes the influence of Diuron concentration and current density on anodic oxidation. The results evidence a first-order degradation, with the highest capacity achieved at 40 mA cm−2 and at an initial Diuron concentration of 38 mg L−1. Nevertheless, in terms of efficiency and energy demand, the operation at 10 mA cm−2 is favored due to the more efficient and less energy-consuming condition. To discern the optimum design and operation conditions, this work presents the results of a preliminary technical–economic analysis, demonstrating that, to minimize the total costs of the system, it is recommended to seek the most efficient conditions, i.e., the conditions demanding the lowest applied charges with the highest Diuron degradation. At the same time, attention must be given to the required cell voltage to not increase excessively the operating costs

Electrochemical characterization of a novel nimesulide anti-inflammatory drug analog: LQFM-091

Nimesulide is an anti-inflammatory drug (NSAID) whose preferential selectivity for cyclooxygenase-2 (COX-2) leads to fewer adverse effects. Nimesulide acts on a single metabolic pathway of the arachidonic acid cascade. Recent studies show that multi-target NSAID is an important strategy for obtaining drugs fewer adverse effects. LQFM-091 has been proposed as a molecular hybridization from nimesulide and BF-389, with the aim to inhibit two enzymes involved in arachidonic acid metabolic cascade. The aim this work was the electrochemical characterization of LQFM-091. The electrochemical analyzes were conclusive to prove that the electroactive groups are unhindered and were important in this drug action mechanism. © 201

Electrochemical characterization of a novel nimesulide anti-inflammatory drug analog: LQFM-091

Nimesulide is an anti-inflammatory drug (NSAID) whose preferential selectivity for cyclooxygenase-2 (COX-2) leads to fewer adverse effects. Nimesulide acts on a single metabolic pathway of the arachidonic acid cascade. Recent studies show that multi-target NSAID is an important strategy for obtaining drugs fewer adverse effects. LQFM-091 has been proposed as a molecular hybridization from nimesulide and BF-389, with the aim to inhibit two enzymes involved in arachidonic acid metabolic cascade. The aim this work was the electrochemical characterization of LQFM-091. The electrochemical analyzes were conclusive to prove that the electroactive groups are unhindered and were important in this drug action mechanism. © 201